R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric Off-Road (https://www.rctech.net/forum/electric-off-road-4/)
-   -   Rc8e vs Rc8be? (https://www.rctech.net/forum/electric-off-road/413609-rc8e-vs-rc8be.html)

MTown701 07-03-2010 10:49 PM

Rc8e vs Rc8be?
 
What are the main differences between the rc8e and the rc8be? All that i have heard is that the rc8be is more durable. Is the rc8te more durable than the rc8be?

kyle3333 07-04-2010 05:31 AM


Originally Posted by MTown701 (Post 7625169)
What are the main differences between the rc8e and the rc8be? All that i have heard is that the rc8be is more durable. Is the rc8te more durable than the rc8be?

Basically the difference between the RC8e and the RC8Be, is that the RC8Be comes optioned out and has a revised steering setup. With the RC8Be you get the FT shocktowers, Big Bore threaded shocks, blue aluminum one piece top plate and M3 Hole Shots with molded inserts. The shocks, diffs, and turnbuckles come pre-assembled too, just add fluid.

I got mine last week and tested it out on tuesday. It feels great, its really nice to drive. The optimized steering setup creates much less bump-steer.

Farmer_John 07-04-2010 07:56 AM


Originally Posted by kyle3333 (Post 7625834)
Basically the difference between the RC8e and the RC8Be, is that the RC8Be comes optioned out and has a revised steering setup. With the RC8Be you get the FT shocktowers, Big Bore threaded shocks, blue aluminum one piece top plate and M3 Hole Shots with molded inserts. The shocks, diffs, and turnbuckles come pre-assembled too, just add fluid.

I got mine last week and tested it out on tuesday. It feels great, its really nice to drive. The optimized steering setup creates much less bump-steer.

I compared the two, shopped for availability, found the right price (240.00 on closeout at Tower) and built one last week.

The diffs and links came built. The RC8e comes standard with the steering mod done.

The differences (beyond the 180.00 price difference):

A B C D plates. The Be's have more adjustments.
Shock towers. The Be's offer more adjustments.
Shocks. The Be uses the threaded aluminum 16mm shocks instead of the cheesy 16mm resin bodies in the e.
Aluminum front top plate (good worthwhile upgrade)

Beyond those differences, they're both the nitro buggies with the AE conversion kit. The e model will accept every Be upgrade.

I"m not sure which set of chassis braces the Be comes with. If it should come with the built up rod braces, I'd recommend DOWNGRADING to the resin braces that come with the RTR and e models. I've bent the rods on hard landings, never had an issue at all with the resin braces.

I will note that I already owned the front top plate and Threaded shocks. I"m running the rest of it with a similar setup to my old Tekno conversion.

Not only does the steering mod reduce bump steer, but it also alleviated the RC8 pushing like a Mack truck...

Zerodefect 07-04-2010 09:33 AM

+1 to all the above.

The RTR chassis braces are the hot ticket. But be sure to replace them if they show any bend or wear at all. Replace them imediately if they are not 100% straight.

The B has way better shocks especially with the 1.1x10 pistons.

Elite Rc has a nice motor mount for the rc8 to.






(If you have niether and are looking for a car, I'd recommend converting a D8, Losi, or Mugen over the rc8)

MTown701 07-05-2010 09:43 PM


Originally Posted by Farmer_John (Post 7626220)
I compared the two, shopped for availability, found the right price (240.00 on closeout at Tower) and built one last week.

The diffs and links came built. The RC8e comes standard with the steering mod done.

The differences (beyond the 180.00 price difference):

A B C D plates. The Be's have more adjustments.
Shock towers. The Be's offer more adjustments.
Shocks. The Be uses the threaded aluminum 16mm shocks instead of the cheesy 16mm resin bodies in the e.
Aluminum front top plate (good worthwhile upgrade)

Beyond those differences, they're both the nitro buggies with the AE conversion kit. The e model will accept every Be upgrade.

I"m not sure which set of chassis braces the Be comes with. If it should come with the built up rod braces, I'd recommend DOWNGRADING to the resin braces that come with the RTR and e models. I've bent the rods on hard landings, never had an issue at all with the resin braces.

I will note that I already owned the front top plate and Threaded shocks. I"m running the rest of it with a similar setup to my old Tekno conversion.

Not only does the steering mod reduce bump steer, but it also alleviated the RC8 pushing like a Mack truck...

Is the Rc8be more durable than the rc8e?

Ed237 07-06-2010 06:16 AM

The Aluminun top plate, shocks, and arm carriers make the RC8BE more durable than the RC8E

MTown701 07-06-2010 12:29 PM


Originally Posted by Ed237 (Post 7634283)
The Aluminun top plate, shocks, and arm carriers make the RC8BE more durable than the RC8E

oh ok so could i put those aluminum parts in an rc8e?

Leodis 07-06-2010 12:59 PM


Originally Posted by MTown701 (Post 7635579)
oh ok so could i put those aluminum parts in an rc8e?

I converted my FTRC8e into a RC8Be. It would have been smarter to just buy a brand new RC8Be and keep the FTRC8e for spare parts.

lpdconcepts 07-11-2010 09:51 PM


Originally Posted by kyle3333 (Post 7625834)
Basically the difference between the RC8e and the RC8Be, is that the RC8Be comes optioned out and has a revised steering setup. With the RC8Be you get the FT shocktowers, Big Bore threaded shocks, blue aluminum one piece top plate and M3 Hole Shots with molded inserts. The shocks, diffs, and turnbuckles come pre-assembled too, just add fluid.

I got mine last week and tested it out on tuesday. It feels great, its really nice to drive. The optimized steering setup creates much less bump-steer.


How did you get an RC8Be FT so soon, they say there not going to be in until mid July?

Voodoo Child 07-12-2010 04:46 AM


Originally Posted by lpdconcepts (Post 7657902)
How did you get an RC8Be FT so soon, they say there not going to be in until mid July?

Hmm, strange- my lhs in Austria (Europe) got some in Stock... :nod:

RC104ever 11-09-2012 07:26 PM

Resurrecting an old thread here - can anyone post the part numbers necessary to upgrade an RC8e to an RC8Be?


All times are GMT -7. It is currently 08:28 PM.

Powered By: vBulletin v3.9.3.4
Content © 2001-2011 RCTech.net