MT .12 Settings
I just started racing nitro, I have a xxxnt with an MT 12. It runs decent but something seems a little off. What are the best settings for it to start at on the high and low end.
|
Come on I know someone out there can help me. How many turns out on the high and low needles would be a good starting point.
|
MT-12
Try 4 Turns out on high end and 3 Turns Out on Low End, If You need more bottom end try to turn in Midrange nedle until it close then turns out 1 turn out, Hope this help ;)
|
My topend is at 3 1/2 turns out in my GT. It is still a little rich but has plenty of power for offroad. It runs about 225 degrees or so after a 7 minute race.
|
Thanks for the help. My low end was terrible the last few weeks and now I know why. It was like 3 turns too far out. Now Ive got some acceleration and it actually idles correctly and doenst bog down after coming to a complete stop.
|
All times are GMT -7. It is currently 10:26 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.