Need Help!!
1 Attachment(s)
Hello How can I remove the shock shaft (threaded part) that was broken and got stucked inside the racers edge shock end. The shock shaft is for MBX5. thnx in advance.
|
1 Attachment(s)
Another pic
|
Your only chance is a reverse drill bit; you chuck the bit into a drill, and drill into the broken screw (or in this case, shock shaft) and when it catches, it threads it right out. You can buy them at hardware stores.
Or you can buy a new one, which will probably cost as much as the special bit. |
Originally posted by Aaron Waldron Your only chance is a reverse drill bit; you chuck the bit into a drill, and drill into the broken screw (or in this case, shock shaft) and when it catches, it threads it right out. You can buy them at hardware stores. Or you can buy a new one, which will probably cost as much as the special bit. |
You can buy them at pretty much any hardware store..I think they're around $10 or $15, and they're pretty useful for getting broken screws out of plastic parts.
|
All times are GMT -7. It is currently 03:52 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.