TLR 8ight e 2.0 Droop
#1
TLR 8ight e 2.0 Droop
So I bought a used 8ight e 2.0. One thing I can't figure out is how to adjust the droop on the front end. I will start this with the face that I am new to the sport and this is my first buggy. When I hold the buggy up, the front has zero droop (the front arms sit level). I was told I need to add droop or install longer shocks.
First off, how do adjust the droop. Secondly, if the shock it to short should I just go back to stock length?
Thanks
First off, how do adjust the droop. Secondly, if the shock it to short should I just go back to stock length?
Thanks
#2
If their stock shocks they should be long enough. Here's how to adjust droop. Same thing for both trucks. Just don't let the a arm (bottom side) touch the frame by adjusting back out too much. Backing the screw out (or up) increases a arm droop.
How to adjust the a-arm ''droop'' angle on an SCTE!
https://www.youtube.com/watch?v=jSNp1asqlS4
How to adjust the a-arm ''droop'' angle on an SCTE!
https://www.youtube.com/watch?v=jSNp1asqlS4
+ YouTube Video | |
#3
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Doesn't this car have a thread? And how to set/adjust droop follows any of the TLR Eight platforms..both nitro and electric
#4