80LikesDurango DEX210 Thread
04-08-2012, 08:11 AM
#5251
Tech Initiate
I'm going to try to get back into RC this year. Is the DEX210 too aggresive for someone who has only about a year of RC racing under their belt? i plan to run 17.5 stock to start. I like the looks of the car, the adjust ability looks great, and the parts availability is going to be resolved soon.
04-08-2012, 08:20 AM
#5252
I'm going to try to get back into RC this year. Is the DEX210 too aggresive for someone who has only about a year of RC racing under their belt? i plan to run 17.5 stock to start. I like the looks of the car, the adjust ability looks great, and the parts availability is going to be resolved soon.
04-08-2012, 07:24 PM
#5254
Tech Addict
I get bored so I took the opportunity for a gear chart: http://www.petitrc.com/setup/durango..._GearChart.pdf
Feel free for comments as I'm not sure about the pinions range.
Feel free for comments as I'm not sure about the pinions range.
04-08-2012, 07:27 PM
#5255
Hope thats the case, would like to end the forever B/O stuff. I order almost everything online, and it sucks having to order from many different stores because of supply.
On a different note, ran my car yesterday on a large and fairly fast 1/8 scale track---and it was pretty good, even though I didnt have the right tires, or even rear rims ( B/O )..
On a different note, ran my car yesterday on a large and fairly fast 1/8 scale track---and it was pretty good, even though I didnt have the right tires, or even rear rims ( B/O )..
04-08-2012, 07:41 PM
#5257
Im using the taper piston from Nick over at Oople. They work great.
Also I have done a shock mod to my MOS shocks. I dont use the MOS shock shaft, but I retained the standard shock shaft, s I could reuse the taper pistons. I hand drilled the white spacer and seat to 3.5mm so the shock shaft could pass through perfectly. It works great. I also use associated orings in my shock with green slime and no leaks at all.
I read somewhere a comment a while back about MIP blue orings. I believe the MIP blue oring is the same as the silicone oring used by Traxxas..
Also I have done a shock mod to my MOS shocks. I dont use the MOS shock shaft, but I retained the standard shock shaft, s I could reuse the taper pistons. I hand drilled the white spacer and seat to 3.5mm so the shock shaft could pass through perfectly. It works great. I also use associated orings in my shock with green slime and no leaks at all.
I read somewhere a comment a while back about MIP blue orings. I believe the MIP blue oring is the same as the silicone oring used by Traxxas..
04-08-2012, 08:08 PM
#5258
Last edited by flame56mx; 04-08-2012 at 09:30 PM.
04-08-2012, 08:45 PM
#5259
I'm going to try to get back into RC this year. Is the DEX210 too aggresive for someone who has only about a year of RC racing under their belt? i plan to run 17.5 stock to start. I like the looks of the car, the adjust ability looks great, and the parts availability is going to be resolved soon.
04-09-2012, 06:20 AM
#5261
I get bored so I took the opportunity for a gear chart: http://www.petitrc.com/setup/durango..._GearChart.pdf
Feel free for comments as I'm not sure about the pinions range.
Feel free for comments as I'm not sure about the pinions range.
I would dump everything above 87 and add the 69T spur.
04-09-2012, 07:13 AM
#5262
04-09-2012, 10:11 AM
#5263
Hope thats the case, would like to end the forever B/O stuff. I order almost everything online, and it sucks having to order from many different stores because of supply.
On a different note, ran my car yesterday on a large and fairly fast 1/8 scale track---and it was pretty good, even though I didnt have the right tires, or even rear rims ( B/O )..
On a different note, ran my car yesterday on a large and fairly fast 1/8 scale track---and it was pretty good, even though I didnt have the right tires, or even rear rims ( B/O )..
| + YouTube Video | |
brain fart dint notice the cars a 1/8 :P awesome wheeling btw!!