New Xerun 150a/80a esc-motor combo's
#754
Tech Lord
iTrader: (32)
Sp oem from hobbywing.
If u need to run 20min main it's possible but u need 8000mah batts n geared lower.
If u need to run 20min main it's possible but u need 8000mah batts n geared lower.
I run the Xerun 150a in my 1/8e and I have had much success with it! 2250kv and the hand held program box for 180 bucks not bad. My temps never run over 150 degree's.
Here is the only down side I have found so far. They only make two motors for this and both are waaay to big and suck lots of juice. Im running 2x 5600mah 50c Protek's. And only getting 13 min in a race. The good new is a main is only 10 min. But I still get jealous on club races they stick me with the Nitro if not enough E's show up. I cant make a 20min main :-(
These systems are basically Speed Passion V2. Its all made in China now days anyways. Im sure if I went to a 1550kv I would get closer to 20 min.
PS I find it to be more reliable than Tekin but Tekin has more options. $320 for a system or $180 pick your poison!
www.hobbywing.com
Here is the only down side I have found so far. They only make two motors for this and both are waaay to big and suck lots of juice. Im running 2x 5600mah 50c Protek's. And only getting 13 min in a race. The good new is a main is only 10 min. But I still get jealous on club races they stick me with the Nitro if not enough E's show up. I cant make a 20min main :-(
These systems are basically Speed Passion V2. Its all made in China now days anyways. Im sure if I went to a 1550kv I would get closer to 20 min.
PS I find it to be more reliable than Tekin but Tekin has more options. $320 for a system or $180 pick your poison!
www.hobbywing.com
#756
Tech Master
iTrader: (4)
Q
Thats what I would have thought. But a guy just won my 20 min race with Electric running against Nitro's. Granted he didnt have to pit saved him 5 seconds or less 3's so maybe a total of 15 seconds Total. I TQ'd the race but like I said only lasted 13 min.
But yes If I get another motor its gonna be the 1700kv. But not ready to spend another $200 just for a motor. When the 2250kv is doing the job. PS I have it turned down to #4 on the Punch settings.
But yes If I get another motor its gonna be the 1700kv. But not ready to spend another $200 just for a motor. When the 2250kv is doing the job. PS I have it turned down to #4 on the Punch settings.
#758
Tech Master
iTrader: (5)
Thats what I would have thought. But a guy just won my 20 min race with Electric running against Nitro's. Granted he didnt have to pit saved him 5 seconds or less 3's so maybe a total of 15 seconds Total. I TQ'd the race but like I said only lasted 13 min.
But yes If I get another motor its gonna be the 1700kv. But not ready to spend another $200 just for a motor. When the 2250kv is doing the job. PS I have it turned down to #4 on the Punch settings.
But yes If I get another motor its gonna be the 1700kv. But not ready to spend another $200 just for a motor. When the 2250kv is doing the job. PS I have it turned down to #4 on the Punch settings.
#764
Tech Master
iTrader: (4)
Yes plz let me know what you think. I just might get one. the 2000kv motor looks to be a slight bigger motor but no worries I have plenty of room in my RC8e. Ive heard it has more torque so like most brush-less just gear it higher. Is my guess. But this is my first year for 1/8e's and the weather this year hasnt been to kind.
#765
Tech Master
iTrader: (5)
Yes plz let me know what you think. I just might get one. the 2000kv motor looks to be a slight bigger motor but no worries I have plenty of room in my RC8e. Ive heard it has more torque so like most brush-less just gear it higher. Is my guess. But this is my first year for 1/8e's and the weather this year hasnt been to kind.