Traxxas Slash 4x4 Thread
#4126
Tech Initiate
#4127
???????????????
#4128
Tech Lord
iTrader: (38)
Guys that are running this combo what gearing are you using?
I have the pro4 4600kv motor and RX8 ESC coming and I picked up a few different size pinions. I am using the 54 tooth on my center diff. I picked up a 13, 15, and 17 tooth gear to fit the pro4 motor but was curious what you guys are running.
I'm mainly gong to be using the truck on a small indoor course but will hit some larger outdoor in the summer hopefully. My slash has the Team RCE lcg chassis also...
I have the pro4 4600kv motor and RX8 ESC coming and I picked up a few different size pinions. I am using the 54 tooth on my center diff. I picked up a 13, 15, and 17 tooth gear to fit the pro4 motor but was curious what you guys are running.
I'm mainly gong to be using the truck on a small indoor course but will hit some larger outdoor in the summer hopefully. My slash has the Team RCE lcg chassis also...
Speed controller hotter than the motor: go to a bigger pinion
Motor hotter than the speed controller: go to a smaller pinion
My temps in the SSC Slash is around 120 for both, my temps for the same combo in my SCTE is 135+ for both..
#4129
#4131
front.
http://www.amainhobbies.com/product_...-Kit-Slash-4x4
rear
http://www.amainhobbies.com/product_...lash-Slash-4x4
#4132
Tech Addict
iTrader: (1)
i know i posted this before but i run the tekno set ups with the 17mm hubs. i had one 4x4 done up with a 2200 monster and a 6c lipo and it stayed together. www.teknorc...
#4133
they have a tendency to pop out and wont work with my extended arms.
#4139
Hey guys,
My SSC LCG build is moving along, slowly. But my pile of used parts is piling up. I had to take a break because I temorarily lost one of those little steering post bearings to the floor gods. 4 hrs later,found it in plain site(the floor gods gave it back!)I will be centering the steering now. Do this before securing the top plate : ) Good thing I'm not using red locktite!
On the matter of shocks, I am running ProLine Power strokes, I have had a leaking issue with one of the rears from day one. Ive replace the orings twice but still leaks. I may go the either big bores rears all around or Losi rears all around. I'll try on more rebuild and check for any imperfectiions on the shaft and the body.
But back to the build...
My SSC LCG build is moving along, slowly. But my pile of used parts is piling up. I had to take a break because I temorarily lost one of those little steering post bearings to the floor gods. 4 hrs later,found it in plain site(the floor gods gave it back!)I will be centering the steering now. Do this before securing the top plate : ) Good thing I'm not using red locktite!
On the matter of shocks, I am running ProLine Power strokes, I have had a leaking issue with one of the rears from day one. Ive replace the orings twice but still leaks. I may go the either big bores rears all around or Losi rears all around. I'll try on more rebuild and check for any imperfectiions on the shaft and the body.
But back to the build...