BuggyKing

iTrader: (17)

I am running a 2650kv on 3s. It is fast but not crazy fast.

Hutch301

iTrader: (29)

I'm with you on that one. I called Monday morning and they advised that it would be two more weeks before they got them in.

SuperEk4

iTrader: (32)

So it possible to use 1/8 motor wo mod?

BuggyKing

iTrader: (17)

Yes that is correct. I just used the stock motor mount with no issues. I have plenty of clearance too. The motor only runs at 90 degrees for a 10 min run.
The only issue is you will have to run a heavier shock setup.

SuperEk4

iTrader: (32)

3s 3000mah or 5000mah?@30c?

lbckevin

iTrader: (107)

why 3s batts Matt...

Most tracks only allow 2s batteries.

Wease

iTrader: (77)

Yup, I thought about that. But I would need the shock bodies ($21.21), shock shafts ($6.76), and springs ($11.01) for a grand total of $38.98. You can buy a complete set of rear shocks by themselves brand new for $33.98

http://www.nitrohouse.com/catalog/pr...ducts_id=12505

I figured I'd ask around first to see if anyone wanted to let their extra rear shocks go for a little cheaper. I have no problem paying $34 for a new set of rear shocks (actually that's cheap), but sometimes It pays to ask around first.

Wease

iTrader: (77)

You can run the stock body, but it requires some trimming near the wheel wells to clear the taller tires. I'm running both the stock body and a JConcepts Truth body on mine with regular short course wheels & tires (i.e. JConcepts Rulux with Calibers, BowTies and Goosbumps. The Truth body is much more durable, but the stock body looks far better.

BuggyKing

iTrader: (17)

cause that is all I have at the moment. Just as fast as like a 4.5 setup really.

BuggyKing

iTrader: (17)

Here is a pic of my electronic setup.

Crawler

iTrader: (6)

Sexy! How are those Losi shocks working out for you?

snrscion

iTrader: (21)

Matt that look good but you need the SNR shock towers to make it look great. Are you racing that tonight?

proraptor

iTrader: (2)

I saw this hop up so scrt10 can use 1/8 motor?


I have that motor mount and its worth its weight in gold....So much easier to change pinions and adjust gear mesh

Pimpin

iTrader: (32)

which losi shocks are those off of?

i have tons of the truck sets laying around.

longbill76

iTrader: (11)

Hey people, well finally finished up the new batch of mounts..


They will be ready to order in a few hours..



Here is the Jammin SCRT motor mount..