RaV3N

Wats the Best ESC and Motor Combo for My Rustler XVL to reach a minimum of 60mph and without getting the motor to hot for a full run. Also trying to make sure I can have some headroom on the gearing so I
can go a little faster If I need to.

sLaSh It UPP

iTrader: (1)

you have the right esc and motor you need 3s lipos

Justpassedu

iTrader: (118)

yupp if you have a VXL system then go with a 3s lipo and it should get you there...

snowboard094

iTrader: (5)

Yup the vxl is very fast on a 3s and surprisingly stays cool if you are geared right. I would say on 3s to run a 86t spur and 26-27t pinion for that kind of speed.

JATOdriver

iTrader: (23)

the one you have will work but mine did 74mph on a 2s with a MM 7700kv with 86/20 , it was STUPID FAST you COULDN'T keep the front tires on the ground w/o a wheely bar

bowl806

+1 I run 22/86, 3s- 5250 in my VXL Pede and it flies. Afraid to go 25,26-86; yikes!

JimmyLA

Dont worry... the novelty wears off in about a day.

RaV3N

I forgot to mention this Rustler was handed down from a friend with a Novak Velociti R 6.5 and a GTB, Im thinking of changing it to go faster.

Justpassedu

iTrader: (118)

dude thats a fine setup just throw 3s in there and you'll be really suprised how fast it goes , trust me and then watch your temp's and play around with gearing....

RaV3N

You sure about using a 3S on the GTB and a velociti R? Novak says their only for 2S. One of the reasons I wanted to upgrade was because the motor already gets hot on the 2S set up when I try to push it past 50.

Justpassedu

iTrader: (118)

oops maybe im not sure , i thought it would be able to handle a 3s but if novak say no then i wouldnt do it , try contacting them to see whats up