R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

Reply
 
Thread Tools Search this Thread
Old 06-28-2004, 03:39 AM   #586
Tech Elite
 
Horatio's Avatar
 
Join Date: Sep 2003
Posts: 3,056
Default

So I'll get the MBX5 SE then...........

OR the Hyper 7 Pro Team UK....(Same as the USA PCR Pro?)

I'm hopefully getting my new radio this week - a brand new Futaba 3VC. Hmmmmm. Damn they're nice.

I tried racing with a steering wheel radio for at a couple of meetings to see if I could get on with one. I figured that if I could, I would have more options available when chossing a new one. Unfortunately I just couldn't get comfortable with it - the throttle trigger was actually quite easy to get to grips, quite intuitive. But the feel of the steering just didn't feel right no matter what I did. I kept under applying steering or over applying when I tried to compensate. Adjusting the rates helped a bit but I was still well below par.

The 3vc stick radio is what I subsequently opted for. Does anyone here use one that might teach me how to use it properly?
Horatio is offline   Reply With Quote
Old 06-28-2004, 03:55 AM   #587
Tech Regular
 
Join Date: Jun 2003
Location: Brisbane, Australia
Posts: 375
Trader Rating: 1 (100%+)
Send a message via AIM to uDi_MP7.5
Default

Nah only gays use stick radios. haha just pissin.
I run a 3pk. Some of the euro boys will run the sticks, doubt you'll have much luck asking here though. I hear the 3vc is wicked though... to me it looks like a 3PJ-gone-stick - so learning to use it will be the same as the 3PJS/FS

had a bad raceday this weekend too, stripped the plastic gear on my steering 9451. Somehow I don't think upgrading to a 9350 will cure that problem? I had my saver done up half way, guess I need to loosen it up for next time.

Now to find that damn gear in this damn country.
uDi_MP7.5 is offline   Reply With Quote
Old 06-28-2004, 05:34 AM   #588
Tech Elite
 
Horatio's Avatar
 
Join Date: Sep 2003
Posts: 3,056
Default

Quote:
Originally posted by uDi_MP7.5
Nah only gays use stick radios......
I doubt you'll ever live that one down - you nutter!!
I shan't bother holding my breath waiting for 'stick' advice here then

I suppose I'll just have to read the book that comes with the 3vc from cover to cover. I'll check any stuff on 3pjs etc as well. Cheers!
Horatio is offline   Reply With Quote
Old 06-28-2004, 06:06 AM   #589
Tech Elite
 
KINGZJ's Avatar
 
Join Date: Sep 2001
Location: South Milwaukee,WISCONSIN
Posts: 2,089
Trader Rating: 3 (100%+)
Send a message via AIM to KINGZJ
Default

UDi I am not trying to start anything but without owning a K3 you simply do not know the differences. Their are several major differences that you seem to leave out. The K2 and K3 are different in several aspects, enough to be worthy of a new name tag. If you ever build a K3 you will see what I am talking about if you simply open your eye's.
KINGZJ is offline   Reply With Quote
Old 06-28-2004, 06:13 AM   #590
Tech Elite
 
PTP Racing's Avatar
 
Join Date: May 2003
Posts: 2,699
Trader Rating: 2 (100%+)
Default

ive decided to get a K3 i just wouldnt feel comfortable knowing i didnt buy the newest and best

i know its not a huge difference but there is a difference and i want the best

i dont wanna get a K2 then always wonder what if i had got a K3

its a physcological thing

plus alot of guys told me to get a K2 but then all of them are K2 drivers nobody's said to me i got a K3 and didnt like it as good as my K2
__________________
Paycheck to Paycheck Racing
Jason Miller
PTP Racing is offline   Reply With Quote
Old 06-28-2004, 06:23 AM   #591
Tech Elite
 
ChrisP's Avatar
 
Join Date: Sep 2003
Location: Shelby Twp, MI
Posts: 2,046
Trader Rating: 8 (100%+)
Default

If you don't feel comfortable buying anything but the newest and best...why are you buying a K3 so soon before Kyosho releases the MP777???
ChrisP is offline   Reply With Quote
Old 06-28-2004, 06:42 AM   #592
Tech Elite
 
PTP Racing's Avatar
 
Join Date: May 2003
Posts: 2,699
Trader Rating: 2 (100%+)
Default

good question

i am selling all my stuff on ebay and need a new buggy before our next big race july 10th

the plan is to scale back my r/c collection and concentrate on only 1 form of r/c racing

doing that should allow me to get a new buggy each year

ive already had a mbx5 and now i will have had a K3

next spring when its time for a new buggy i will decide which i liked better and get mbx5 prospec or mp777

at this point i would have to wait untill august for a mp777 and at which time it was available the price is $850 (at tower) and thats awfully steep when i dont even know if i will like it
__________________
Paycheck to Paycheck Racing
Jason Miller
PTP Racing is offline   Reply With Quote
Old 06-28-2004, 08:19 AM   #593
Tech Elite
 
Horatio's Avatar
 
Join Date: Sep 2003
Posts: 3,056
Default

Quote:
Originally posted by KINGZJ
UDi I am not trying to start anything but without owning a K3 you simply do not know the differences. Their are several major differences that you seem to leave out. The K2 and K3 are different in several aspects, enough to be worthy of a new name tag. If you ever build a K3 you will see what I am talking about if you simply open your eye's.
Hehehe, oh BTW UDi I'm not starting anything, but you're blind as a bat!!

You guys

Clearly the K3 has numerous changes, I reckon UDi was just saying that buck for buck, you'ld end up with a great deal with the K2 so long as you don't mind living without the K3's revisions. He wasn't saying the K2 is better.

Driving both cars is the best way to decide which one to go for - building both, however, that would be quite difficult to do without actually owning both types! As it turns out, I think we have a winner now anyway - PTP is going for a K3.
Horatio is offline   Reply With Quote
Old 06-28-2004, 08:29 AM   #594
Tech Elite
 
PTP Racing's Avatar
 
Join Date: May 2003
Posts: 2,699
Trader Rating: 2 (100%+)
Default

yep ive decided on K3

i just hope my kit doesnt have the rear universal problem
__________________
Paycheck to Paycheck Racing
Jason Miller
PTP Racing is offline   Reply With Quote
Old 06-28-2004, 09:50 PM   #595
Tech Regular
 
Join Date: Aug 2003
Location: LI, New York
Posts: 370
Default

Quote:
Originally posted by PTP Racing

i dont wanna get a K2 then always wonder what if i had got a K3

its a physcological thing
good luck with it. I might just get the K3 for the same reason.
Jasonchi is offline   Reply With Quote
Old 06-28-2004, 10:36 PM   #596
Tech Elite
 
PTP Racing's Avatar
 
Join Date: May 2003
Posts: 2,699
Trader Rating: 2 (100%+)
Default

gotta go back on what i just said i found a deal on a K2 i couldnt refuse
__________________
Paycheck to Paycheck Racing
Jason Miller
PTP Racing is offline   Reply With Quote
Old 06-29-2004, 01:28 AM   #597
Tech Regular
 
Join Date: Jun 2003
Location: Brisbane, Australia
Posts: 375
Trader Rating: 1 (100%+)
Send a message via AIM to uDi_MP7.5
Default

Nope I havent owned a K3 but I have messed around with a few guys ones at the track, they dont seem THAT much different. We're not talking K1-K2 sorta differences here, just some minor updates I still say.

Anyway i'm not the one to argue, just get the one that fits your bill, I cant imagine anyone not being happy with either.

Back to servo talk guys, I killed the plastic gear on my steering 9451, and later on I decided to be a f*cktard and try pulling the whole thing apart, and took the back off the coreless motor, im pretty sure i screwed something up.

So i'm just wondering, what should I get next? I can pick up another used 9451 for not to steep a pricetag, or I can order a 9350. I got a gut feeling the 9350 won't be any better than the 9451 in terms of plastic gear strippability....

It seems a bitch in this country to get the plastic gear for ANY of these damn metal geared servos, so it'd be nice to have one thats harder to strip. GRR

Its the 9350 or the KO 2344, or any other digital servo. JR? Someone said they didn't last long though. Jesus I hate servos!!!
uDi_MP7.5 is offline   Reply With Quote
Old 06-29-2004, 01:36 AM   #598
Tech Fanatic
 
revzalot's Avatar
 
Join Date: Apr 2004
Location: Nor * Cal
Posts: 958
Trader Rating: 4 (100%+)
Default 1/8 Buggy field is getting more Hardware

Lots of new stuff coming out this year (or aleady out).

Mugen MBX 5
SWK Mayhem
X-Ray XB8
Kyosho 777

Since I'm in still in search of one, I think I'm going to wait til they all come out. What do you guys think will be the Ultimate Killer Rig? 777?
__________________
www.revzalotmotorsports.com
revzalot is offline   Reply With Quote
Old 06-29-2004, 03:37 AM   #599
Tech Elite
 
Horatio's Avatar
 
Join Date: Sep 2003
Posts: 3,056
Default

Quote:
Originally posted by uDi_MP7.5
Nope I havent owned a K3 but I have messed around with a few guys ones at the track, they dont seem THAT much different. We're not talking K1-K2 sorta differences here, just some minor updates I still say.

Anyway i'm not the one to argue, just get the one that fits your bill, I cant imagine anyone not being happy with either.

Back to servo talk guys, I killed the plastic gear on my steering 9451, and later on I decided to be a f*cktard and try pulling the whole thing apart, and took the back off the coreless motor, im pretty sure i screwed something up.

So i'm just wondering, what should I get next? I can pick up another used 9451 for not to steep a pricetag, or I can order a 9350. I got a gut feeling the 9350 won't be any better than the 9451 in terms of plastic gear strippability....

It seems a bitch in this country to get the plastic gear for ANY of these damn metal geared servos, so it'd be nice to have one thats harder to strip. GRR

Its the 9350 or the KO 2344, or any other digital servo. JR? Someone said they didn't last long though. Jesus I hate servos!!!
Some people never have any luck with them. I on the other hand have rarely had problems. I've still got acoms servos floating around in my son's cars from the 80's I obviously have servo voodoo

One of My hitec digital 5945's is still doing crazy stuff in a highly modified Savage SS. The steering has been modified too, with a much firmer servo saver, even so the 5945 hauls those Massive tyres around like they're not even there. No stripping, no blown amps or anything. All the while, servo's have been breaking left right and centre at my club - mainly analogue types Futaba and Hitec. Personally I reckon the triple is taking it's toll...........

Looks like you'll have to import some spare gear-sets with your next servo - just incase.
Horatio is offline   Reply With Quote
Old 06-29-2004, 04:29 AM   #600
Tech Regular
 
Join Date: Jun 2003
Location: Brisbane, Australia
Posts: 375
Trader Rating: 1 (100%+)
Send a message via AIM to uDi_MP7.5
Default

Yeah man im lost. Hitec seem to be the only company actually developing something useful geartrain wise - the hitec "plastic" gear has the small gear part of it in metal with only the main gear in plastic, as far as I know all the other brands have the whole gear in plastic. And also they have those new 100% delrin (or whatever it is) geartrains which look promising too.

Anyway KINGJZ - can I buy the plastic gear alone for the 9350? I'm really pissed off that (or if) Futaba include plastic "slave" gears and then expect you to buy the whole metal gearset which usually cost as much as the servo, to get another measly slave gear. WTF??

KO sell the plastic gears for theirs seperately and so does JR so im debating with myself whether its worth sticking with the old F here.

Last edited by uDi_MP7.5; 06-29-2004 at 05:15 AM.
uDi_MP7.5 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
best 1/10 4wd offroad buggy more$thanbrains Electric Off-Road 10 04-05-2008 05:24 PM
WTB - offroad buggy Crazy Clyde R/C Items: Wanted to Buy 3 02-09-2008 06:44 PM
looking for a offroad buggy boomer_660 R/C Items: Wanted to Buy 3 03-22-2007 10:35 AM
4wd offroad buggy Besercoe Australia Wanted to Buy 4 07-02-2006 04:22 AM
1/8 Buggy offroad Xtreme Australian Racing 8 08-06-2003 03:14 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 06:20 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net