B4 Lightweight setup
#31
#33
#36
Tech Elite
iTrader: (149)
Join Date: Nov 2005
Location: Where the ego's are so big, people's heads can't fit in the door
Posts: 3,316
Trader Rating: 149 (100%+)
#37
Tech Apprentice
iTrader: (1)
Today I used a setup I found on Mo/ks under smac track for my t4 that light weight setup in stock, worked fine. The hubs my understanding is for more side bite. I dont know maybe in mod you need more side bite but in stock on hard packed dirt it ran fine with standard hubs
#38
Tech Elite
iTrader: (61)
Today I used a setup I found on Mo/ks under smac track for my t4 that light weight setup in stock, worked fine. The hubs my understanding is for more side bite. I dont know maybe in mod you need more side bite but in stock on hard packed dirt it ran fine with standard hubs
Mo/ks under smac track <<< translate please
Hubs are for forward traction.
#41
I am running Orion 3400 lipos i dont add any weight, all i have done was losen up my preload collars, 25wt in front 30wt in rear. tried out a few different piston combos (cant remember what i settled on) But i raced last night and my car was pretty dialed. I havnt tried a real setup off AEs website so dont know how mine would compair, but im going to get the lightweight setup and adjust my t4
#43
Tech Fanatic
iTrader: (19)
I am running Orion 3400 lipos i dont add any weight, all i have done was losen up my preload collars, 25wt in front 30wt in rear. tried out a few different piston combos (cant remember what i settled on) But i raced last night and my car was pretty dialed. I havnt tried a real setup off AEs website so dont know how mine would compair, but im going to get the lightweight setup and adjust my t4
Until I get my lipo plate that I ordered from chedda bob Fri night . I'm actually 1512 grams and used stock hubs.
This setup works great