R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric Off-Road (https://www.rctech.net/forum/electric-off-road-4/)
-   -   RC8T Electric kit? (https://www.rctech.net/forum/electric-off-road/273998-rc8t-electric-kit.html)

bigbeej 02-08-2009 02:30 PM

RC8T Electric kit?
 
I read a post on rcuniverse where a guy said that AE offers a FT RC8T kit geared towards electric guys. Meaning in the kit you get the electric conversion setup instead of the fuel tank, clutchbell, motor mount, etc. for the same price as the FT kit. Is this true? I am about to buy an RC8T to convert and this would be perfect for me.

AndyMoore 02-08-2009 03:36 PM

I dont think that AE offers this, only the RC8E at the moment.

jhautz 02-13-2009 10:38 AM

http://www.rc-monster.com/proddetail...RCMRC8Tchassis

This is the conversion kit you want. I have been racing it for a few weeks now and its flat out awesome. I'm faster than I have ever been in truggy before.

Cain 02-13-2009 12:22 PM

AE may have that in the future. Its not like it takes much to make a Limited edition electric RC8T like they did with the RC8.

that said, if you don't want to wait, or, you want to use longer batteries, I have to say that the RCM conversio for the RC8T is really something. It moves the battery weight over and gives you a nice trick chassis setup too. Also, you get the excellent customer service of RC Monster.

Only thing I would recommend looking into is different chassis braces as I had issue with the stock RC8T chassis braces.

bigbeej 02-13-2009 03:30 PM

My only issue with the Rc-moster setup is the radio tray. I really like the battery tray setup in the AE conversion kit. Is it possible to use the AE conversion radio tray on the RCM conversion?

jhautz 02-13-2009 03:54 PM

I'll let you know as soon as I get my AE radio tray. I have one in the mail on its way to me right now. It was $10 so I figured i'd give it a try. The only reason why it might not fit is if it hits the vertical mud guard on the RC-Monster chassis. Other than that it should just drop right in.

bigbeej 02-13-2009 04:03 PM

Please let me know. Is there currently mounting holes for it on the RCM chassis or will you have to drill and countersink the holes for it? Please let me know when ASAP as I am having JDcrow send me an invoice for the AE kit. I will hold off until I hear back thanks.

Also looking at the RCM conversion on their site and where do you mount the ESC?

jhautz 02-13-2009 04:42 PM

I'm not sure cuz I dont have it yet, but I think it just uses the same mouting holes that the stock servo mount uses. The RCM chassis has th stock stering servo mount hole locations so the box should fit that I'm thinking. We'll see when it gets here.

jhautz 02-13-2009 04:45 PM


Originally Posted by bigbeej (Post 5428257)
Please let me know. Is there currently mounting holes for it on the RCM chassis or will you have to drill and countersink the holes for it? Please let me know when ASAP as I am having JDcrow send me an invoice for the AE kit. I will hold off until I hear back thanks.

Also looking at the RCM conversion on their site and where do you mount the ESC?

It fit nicely right down flat on the chassis behind the battery.

Here's a crappy picture, but you can see what i'm talking about.

http://i66.photobucket.com/albums/h2...T/photobc1.jpg

kdub 02-13-2009 07:12 PM

At the recent toy fair there was announced an electric version, but it is not a Factory Team kit.

jhautz 02-17-2009 01:05 AM

UPDATE: The AE Servo Tray/Rx Box doesnt fit in the RCM conversion. It hits against the vertical mud guard on the RCM conversion. The mud guard could probably be modified to work around the box, but its not a straight drop in. I got the box Saturday and tried to fit it sunday and it didnt fit. Even if it did fit...after getting it in my hands I really dont like it very much anyway. It puts the transponder mount right in front of the motor pinion and basically would make it impossible to get to the motor screws without taking the radio tray/servo mount out first.

I may try doing a little creative modification with it and see if I can come up with something I like when I get a chance next week or something.

Cain 02-17-2009 08:51 AM

figured that would happen. assuming that the stock mud guards on the rc8t also won't fit the RCM chassis.

Oh well. If you don't get it to work Jhauz let me know what you want for it as I have an RC8 RCPD conversion that uses the stock chassis, and could use the receiver tray. :nod:

bigbeej 02-18-2009 12:20 PM

Just got my RC8T in the mail at my office. Starting my conversion build tonight....

chip cross 02-18-2009 12:25 PM


Originally Posted by jhautz (Post 5427166)
http://www.rc-monster.com/proddetail...RCMRC8Tchassis

This is the conversion kit you want. I have been racing it for a few weeks now and its flat out awesome. I'm faster than I have ever been in truggy before.

Mike's products are great !!! :nod:

fullsyzz 02-18-2009 07:43 PM

I just finished building a new RC8T kit w/AE conversion. RC-Monster makes sweet parts, I just opted for the factory kit. After seeing the RC8T shortcomings, it was built with M2C Racing rear hubs, and A, B, C, & D blocks; King Headz steering knuckles, chassis braces, and center diff plate. Jconcepts body, Upgrade wheel and wing skins for a little bling.

http://i334.photobucket.com/albums/m...yz/rc8t001.jpg
http://i334.photobucket.com/albums/m...yz/rc8t002.jpg
http://i334.photobucket.com/albums/m...yz/rc8t003.jpg


All times are GMT -7. It is currently 11:05 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.