molded buggy foams 1/10
 

anyone make rear molded buggy foams?

I do. I think grp or somebody had some out but i havent seen them in the u.s
If you run a losi tire ofna orange 1/8 foams make good foams just cut out a section of the foam(cut to fit rim nice) then contact cement both sides of foam lightly then glue together. Contact cement makes the most plyable glue seam. The ofna foams arent quite wide enough to fit a pro-line tire perfect. I think jconcept or panthers would be ok as they seem to be a slightly narrower carcass than proline.

Tamiya makes front and rear for 4wd...

they come in dark impact kits, but you'll have to buy the tires also.

tam51241 rear
tam51240 4w front

I've run them before and they work good...