Larks

I am looking for a small (as small as possible) receiver box to put my spektrum sr3100 receiver. I have purchased a Tekno V3 conversion kit, and I do not like how limited on space the area is to put the electronics. There is another place I have found to put the receiver (over by the servos), but I need a small, preferably thin, box so things don't bounce around. I am currently using a zip'd balloon, but I was looking for something a little more long term =).

Any suggestions would be greatly appreciated. I know lots of companies, OFNA, Traxxis, AE, etc make boxes, however I cannot find a place that carries them in town, and the websites don't display the dimensions.

Thanks.

badassrevo

iTrader: (12)

Give the Team Associated RC10 GT or GT2 reciever box a try. You can go OEM or RPM they both make them.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDGR1

badassrevo

iTrader: (12)

You could also try a battery box from a TMAXX.

Larks

Thanks for the reply. I think the rpm one might be too big. I saw one at the LHS but I don't know if it was that one or not. I will look into it. Thanks again.

badassrevo

iTrader: (12)

The Gt reciever box will fit on the outside of the steering servo and under the body on a RC8. It is relatively small.