Nexus

iTrader: (42)

Other than on Team Losi's site are their some setup sheets somewhere online to view??

Jammin"145

I have broken a front cvd and rear cvd right were the pin goes thru that attaches the bone to the ball end.I have only ran this car about 5 packs worth so it is basicly brand new.Has any one else had this issue.Like the car but not broken cvd's every other run.

morris

iTrader: (44)

nexus,
the springs for youre car...well the 2'' will be for the front..the 2.5 and 2.75 are rear springs for youre car or truck springs all the way around.except for 2.75 in the front.on youre car as long as you have the 2'' green you should be able to maintain arms level.you can also use the 2'' springs in the back of youre car/truck.but you will have to tighten down the collars to get youre ride height.2.75 springs are longer only because of how soft they are.

hope this helps you out a little.

as listed in youre post
softest to stiffest is

white
yellow
pink
red
orange
silver
green
blue
black

im pretty sure thats the order...i think...lol
again hope this helps

kzacher

I had the same problem setting up the front end of mine. Most of the issue was do to switching to the G+ shock towers. I added some interior limiting (larger of the 2 sizes) with the shock spacers A5050 and that has allowed me to get the car level. You could also look for some shorter shock shafts, I haven't tried that yet.

Nexus

iTrader: (42)

Anyone have an extra oneway they want to sell?

[email protected]

johnny boy

iTrader: (326)

does anybody know if a company makes a aftermarket one way for the xxx-4??? besides the normal losi one. or have a link to where i can get one?? thanks for any help

Jr.

should of got a ZX-5, they come with a oneway .. hehe j/k

G/L finding one, ive heard everyone is sold out of losi oneways...

johnny boy

iTrader: (326)

im not looking for the losi one im looking for a different manufactured one. maybe one that doesn't break

Chris Jarosz

there is no aftermarket one. if you build the oneway correctly as Chris has said earlier then it wont break.

jimlazaro

iTrader: (2)

Try this:
www.dragonrc.com

johnny boy

iTrader: (326)

trust me they still break i have losi factory drivers build them for me and the still blow out.

what sucks you blow one side it cost 30.00 dollars and right side has to be used for the right side so i you blow one side out you might has well get a whole new one way for the $60
good old 4-wheel for ya though

johnny boy

iTrader: (326)

thanks for the replys guys

could have sworn some odd ball company sold a full assembly one-way

mtn bkr

iTrader: (19)

Johnny, check your PMs regarding a one-way diff from an aftermarket company.

Rysuleod

iTrader: (1)

Losi XXX-4 one-way from the UK
http://dcracing.co.uk/dcrshop/produc...480855c60088fc

I've had one on order for two weeks now. The guy is waiting on parts from a supplier.

johnny boy

iTrader: (326)

thank you guys exactly what im looking for, i new there was one out there


thanks to all