Losi xxx-4
#1681

Make sure you use a 4-40 tap on the holes in the covers at the chassis and the bumper. Alot of times a small crack develops just from assembly. This helps alot.

#1682

I ran the XXX4 with a trakpower 4900, talk about awesome. very little modification to battery tray needed. also just used other side of battery strap, flat side. the power was awesome, i felt like i was running matched cells except the runtime was ridiculous. nice upgrade, easily 2 heats on one battery.
http://www.BulldawgRC.com
http://www.BulldawgRC.com

#1684
Tech Rookie

Where would be a good place to start gearing with a Novak 5.5? FYI, Need more bottom end than top. Thanks

#1695
Tech Master
iTrader: (22)

Glad to hear there's still some life left in this platform. Dug mine out (one of the first made-of-glass plastic cars) and have just added all the G+ hopups and the XXX-S/CR rear end mods. Gonna start with the "worlds" setup I found on the 4WDRC forums and see how she goes. Also picked up a pretty dialed XX4WE off the 'bay just in case

