Monster Mamba Max Sneak Preview
#2
Tech Adept
Patrick posted on rcgroups too...
"Good news! We got the first press off the mold, and have accepted the final mold assembly.
Now we need a couple weeks to get production scheduled in, and we should be good to go."
Glad to see the cases are finally sorted, affordable 6S madness is so close now. (Pre-release estimated pricing is ~170 for the ESC and ~300 for the combos - again from Patrick on rcgroups).
"Good news! We got the first press off the mold, and have accepted the final mold assembly.
Now we need a couple weeks to get production scheduled in, and we should be good to go."
Glad to see the cases are finally sorted, affordable 6S madness is so close now. (Pre-release estimated pricing is ~170 for the ESC and ~300 for the combos - again from Patrick on rcgroups).
#3
Sweetness. Now I really need an electric 1/8th scale. The regular Mamba Max holds up well with fans, but this is a much more elegant solution.
I wonder if we could use a few of them and make an electric 1/1 scale car?
I wonder if we could use a few of them and make an electric 1/1 scale car?
#4
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
If the Mamba Max holds up wait til the new one is available. Can't imagine too many other 1/10 speedos do that.
#5
I am excited. The ESCs have been the weak point of all these conversions as none have been very reliable with heat or other problems. I think the release of the MMM will help push 1/8 electric mainstream in a big way as Castle is a recognizable brand. The regular Mamba works very well, so I am sure this one designed for larger motors and batteries should be up to task.
Now if we can get the cost of lipo batteries to come down a little faster...
Now if we can get the cost of lipo batteries to come down a little faster...
#6
Tekin is also planning to offer a 1/8 BL controller and motors very soon. We just finished the pcb layouts and are headed to proto boards. We might slip out a concept drawing pretty soon. All the same great features as our 1/10 controller including a sensor plug and switchng BEC. We did go with a top heat sink and fan for extreme power ability.
We have already had success with our R1pro in 1/8 scale also. We have raced it competively with no fan in buggy and truggy with 4s lipo. Just shows how over beefed that controller really is. Not recomended, but you guys rarely pay attention to that anyway. With the kind of mods you are doing to the MM by adding fans it handles it easily......
Tekin Prez
We have already had success with our R1pro in 1/8 scale also. We have raced it competively with no fan in buggy and truggy with 4s lipo. Just shows how over beefed that controller really is. Not recomended, but you guys rarely pay attention to that anyway. With the kind of mods you are doing to the MM by adding fans it handles it easily......
Tekin Prez
#7
Tech Regular
iTrader: (1)
Patrick del Castillo - Owner of Castle Creations, "Good news! We got the first press off the mold, and have accepted the final mold assembly. Now we need a couple weeks to get production scheduled in, and we should be good to go.
Retail price is set (and don't hold me to this -- this is pre-release estimated price!!!) at $199.95 for the ESC, and $329.95 for the combo.
This would mean street price around $170 for the ESC only."
ETA is about three weeks.
Pre-orders will start around April 14th, shipping should start around April 21st.
SPECIFICATIONS (may vary on final shipping product):
Switching BEC, 6V output
2S - 6S Lipo / 7S - 20S NiCd/NiMH
.0002 ohms (200 microohms) single phase
>175A continuous, >1000A surge (1 second), >2000A pulse (10us)
No built-in USB connector, will ship with Castle Link
6 layer/ 6 oz per layer power board (> .050" PCB copper thickness)
Cross cut high performance black anodized heat sink with built-in 30mm BB fan
Footprint: 1.95" x 1.75"
Retail price is set (and don't hold me to this -- this is pre-release estimated price!!!) at $199.95 for the ESC, and $329.95 for the combo.
This would mean street price around $170 for the ESC only."
ETA is about three weeks.
Pre-orders will start around April 14th, shipping should start around April 21st.
SPECIFICATIONS (may vary on final shipping product):
Switching BEC, 6V output
2S - 6S Lipo / 7S - 20S NiCd/NiMH
.0002 ohms (200 microohms) single phase
>175A continuous, >1000A surge (1 second), >2000A pulse (10us)
No built-in USB connector, will ship with Castle Link
6 layer/ 6 oz per layer power board (> .050" PCB copper thickness)
Cross cut high performance black anodized heat sink with built-in 30mm BB fan
Footprint: 1.95" x 1.75"
#8
Sweet
Finally my Losi 8 can hit the track with electric power
I would like to pre order a MMM
How can I do this and where?
Tekin prez -
I can be a tester for your 1/8 , I am here in south Texas and it is very hot down here, a good way to test your stuff
thanks
Finally my Losi 8 can hit the track with electric power
I would like to pre order a MMM
How can I do this and where?
Tekin prez -
I can be a tester for your 1/8 , I am here in south Texas and it is very hot down here, a good way to test your stuff
thanks
#9
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Your local hobbyshop can backorder these for you. All the standard distributors that carry Castle Creations will carry these as well.
#11
Tech Adept
Like everyone else, I don't like waiting - but in a way I'm glad CC are taking their time to get everything sorted. It would disappoint a lot more people if they released something that didn't live up to expectations.
I'm not sure if the part number is public knowledge yet, but tower hobbies are usually quick on the listing of new parts. It would be a safe bet they'll list it as soon as possible.
I believe it is a CCBEC incorporated internally. If true, this means output is selectable from 4.8 - 9 volts via castle link.
PREZ - Glad to see your company getting in on the ground floor of 1/8 electric, so to speak. I look forward to hearing more about the tekin hardware and how the specs stack up against the MMM.
I'm not sure if the part number is public knowledge yet, but tower hobbies are usually quick on the listing of new parts. It would be a safe bet they'll list it as soon as possible.
PREZ - Glad to see your company getting in on the ground floor of 1/8 electric, so to speak. I look forward to hearing more about the tekin hardware and how the specs stack up against the MMM.
Last edited by Cornelius; 04-03-2008 at 03:19 AM.
#12
man i cannot wait till this is released. how is it supposed to do with a 6pole motor? i run a mega ACn motor and its 6 poles, so i want something that i know can take it. the mamba max handled it fine... but the punch had to be set to 50 and everything was set kinda funky...
#14
whoa where you see it? any info on dates?