recommended minimum servo specs for 1/10th
#1
recommended minimum servo specs for 1/10th
I have a Hitec HS-5245 BB MG Digital Mini spare from my 1/18th...would this servo pass muster for a 1/10 stock 4WD buggy ?
specs:
speed: 0.15 sec @ 60° at 4.8V (not sure @ 6V)
Torque: 61 oz-in (4.4 kg-cm) at 4.8V / 76 oz-in (5.5kg-cm)@6V
specs:
speed: 0.15 sec @ 60° at 4.8V (not sure @ 6V)
Torque: 61 oz-in (4.4 kg-cm) at 4.8V / 76 oz-in (5.5kg-cm)@6V