Paul Whalen

iTrader: (69)

Ok, I have a maxamps 6000 Mah 3's and a 6000 Mah 2's lipo and im going to set-up the Cutoff voltage for the lipos with the esc....the mamba's setting #2 says it will auto-cutoff back and forth between 2's and 3's lipo "correctly" for each pack as they are plugged in. My question is...is this all I have to do to set-up my voltage cutoff for running Lipos in my rig. This is all new to me, if this is all I have to do than I am happy and great product MM, if there is anything else to set please let me know. thanks guys.

fastpede

Yep, just program it for auto lipo, and it does the rest.

_pilot_

Yep thats all you have to do. In auto mode you will here tones when you switch the esc on. 2 beeps for 2 cell and 3 beeps for 3 cell.

Paul Whalen

iTrader: (69)

thanks guys

AEracer40

iTrader: (2)

You have the option to also have a custom cutoff voltage in the Mamba Max esc. For 2s lipo, i use 6.2 volts. works perfectly! Just use a setting that is .2 volts above the recommended cutoff value. Really helps to protect those expensive packs.