Vintage ESC
#1
Vintage ESC
Hi,
I've been digging in my old stuff and found 2 working ESC's! It's a Novak 410-M1c and a Novak 410-HPc. I didn't found the user guides back, does anybody have those in electronic format?
Thanks
I've been digging in my old stuff and found 2 working ESC's! It's a Novak 410-M1c and a Novak 410-HPc. I didn't found the user guides back, does anybody have those in electronic format?
Thanks
#2
I uploaded the 410Hpc user manual here:
http://rapidshare.com/files/61992336...Instr.pdf.html
I also share with you a mail that I sent to novak some years ago:
*****
>>What is the motor limit for a Novak 410 HPc ?
>Team Novak Customer,
>The HPc was a competition level ESC when it was released and did not
>have a motor limit in it's day. I would recommend sticking with motor winds
>that were available then. The HPc can probably handle the low wind motors
>but you should monitor it for heat very closely the first couple times you
>use it. To be on the safe side go with 10 turns or more.
*****
bye
Emanuele
http://rapidshare.com/files/61992336...Instr.pdf.html
I also share with you a mail that I sent to novak some years ago:
*****
>>What is the motor limit for a Novak 410 HPc ?
>Team Novak Customer,
>The HPc was a competition level ESC when it was released and did not
>have a motor limit in it's day. I would recommend sticking with motor winds
>that were available then. The HPc can probably handle the low wind motors
>but you should monitor it for heat very closely the first couple times you
>use it. To be on the safe side go with 10 turns or more.
*****
bye
Emanuele
#3
Excellent, thanks a lot !
I used to run it for national championships and went down to 10x4. So until there it's good!
I used to run it for national championships and went down to 10x4. So until there it's good!