Trouble with XXX-4

Reply

Old 05-23-2007, 02:54 PM
  #1  
Tech Rookie
Thread Starter
 
Join Date: Aug 2006
Posts: 17
Trouble with XXX-4

My slipper keeps slipping after about 2 minutes of driving. I constantly have to take it apart at tighten it before each run. It is a pain and is their anyway to stop this?
bemmermazda is offline  
Reply With Quote
Old 05-23-2007, 02:58 PM
  #2  
Tech Elite
iTrader: (21)
 
Drift_Buggy's Avatar
 
Join Date: Dec 2004
Location: Australia
Posts: 2,655
Trader Rating: 21 (100%+)
Default

It is very common, i believe everyone uses a very small amount of BLUE loctite on the nut

Cheers
Drift_Buggy is offline  
Reply With Quote
Old 05-23-2007, 03:02 PM
  #3  
Tech Regular
iTrader: (2)
 
Alltapdout's Avatar
 
Join Date: Feb 2007
Location: Great White Buffalo
Posts: 412
Trader Rating: 2 (100%+)
Default

loctite, is the final solution, personally after I rebuilt mine twice and taken apart and adjusted a couple hundred times, it finally quit coming loose

Take it apart and make sure that the small wavy spring is not bound up in the main drive gear, also check to make sure that the small metal shims are also relativly free...I have heard of people loctiting them, I never wanted to go there!

Also be very easy if using reverse that tends to loosen them more quickly, other than that i just try to be "easy" on the throttle, not to go from a dead stop to full throttle.
Alltapdout is offline  
Reply With Quote
Old 05-24-2007, 08:18 AM
  #4  
Tech Fanatic
 
sport10's Avatar
 
Join Date: Dec 2005
Location: Pensacola, FL
Posts: 973
Default

It will do this until the slipper breaks in. Once the slipper has broken in it will not be a problem. You do not need any locktite!
sport10 is offline  
Reply With Quote
Old 05-24-2007, 04:20 PM
  #5  
Tech Initiate
 
Join Date: Apr 2006
Location: Kalamazoo, MI
Posts: 27
Default

The chance of this is probably pretty low, but did you get it used. I've read (not seen) that some of the early XXX-4's had this problem do to the way the slipper nut was threaded. They changed it to a reverse thread later. So if it is righty tighty lefty loosey you have the old one and should probably just buy a new slipper assembly.
kzacher is offline  
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Terms of Service