JConcepts Thread
#752
whens that new JC BJ4 body going to be available?
#753
Soon!
I really cant say if we do have a body to fit those cars. Perhaps they resemble on of the major brand cars and one of those bodies will fit? I know the OCM car can use the Mugen body, etc.
We will have 1/8th wheels for truck and buggy, yes. I cant say whether or not we will make a Losi truck wheel, as the support from Losi for those products has been dwindling. Im not Jason, but I wouldnt count on a Losi wheel truck wheel (it is on the list of possible projects though).
Soon!
I haven't followed the thread too closely, will the new wheels be available for 1/8 buggies too?
BTW, with the new Losi truck coming out Losi 1/10 trucks both electric and gas will use the same rims front and rear. One mold to cover front and rear on two vehilces? That's gotta be easy enough.
BTW, with the new Losi truck coming out Losi 1/10 trucks both electric and gas will use the same rims front and rear. One mold to cover front and rear on two vehilces? That's gotta be easy enough.
Soon!
#754
Cool to hear about the 1/8 wheels. If it hasn't already been developed make sure to check it on an Xray. I just picked up an Xb8 partially converted to an ec and some of my current dish wheels webbing hits the corner of the a-arm at full throw. I have never seen a car with that clearance problem.
#756
Cool to hear about the 1/8 wheels. If it hasn't already been developed make sure to check it on an Xray. I just picked up an Xb8 partially converted to an ec and some of my current dish wheels webbing hits the corner of the a-arm at full throw. I have never seen a car with that clearance problem.
#757
#759
Cool to hear about the 1/8 wheels. If it hasn't already been developed make sure to check it on an Xray. I just picked up an Xb8 partially converted to an ec and some of my current dish wheels webbing hits the corner of the a-arm at full throw. I have never seen a car with that clearance problem.
I'll mark it down on our list of possibles.
#761
Still waiting on word from JConcepts tires.....
#763
I saw the Double D 1/10th scale tires run on slick clay and they were definitaly impressive, completely different compound and tread pattern. Looking forward to getting some.
#764
Tech Initiate
Anyone try using a Lipo saddle pack in the BJ4? The dimensions on a Maxamps 4400 lipo are simliar to a lower NiMH saddle pack (I can't find the dimensions for the BJ4's battery area(s)).
Also, I want to use my velineon motor, esc and the steering servo (it's a 110oz digital with good speed) from the rustler vxl in the buggie. Will that be a problem?
Thanks
Also, I want to use my velineon motor, esc and the steering servo (it's a 110oz digital with good speed) from the rustler vxl in the buggie. Will that be a problem?
Thanks
#765
Tech Addict
Anyone try using a Lipo saddle pack in the BJ4? The dimensions on a Maxamps 4400 lipo are simliar to a lower NiMH saddle pack (I can't find the dimensions for the BJ4's battery area(s)).
Also, I want to use my velineon motor, esc and the steering servo (it's a 110oz digital with good speed) from the rustler vxl in the buggie. Will that be a problem?
Thanks
Also, I want to use my velineon motor, esc and the steering servo (it's a 110oz digital with good speed) from the rustler vxl in the buggie. Will that be a problem?
Thanks