JConcepts Thread
#5236
edit: double post
#5237
are these the inserts that come with SC tires?
http://www.amainhobbies.com/product_...-Insert-Firm-2
One set of tires I got from JC for Short course seemed to have a lighter shade of blue inserts are they different?
http://www.amainhobbies.com/product_...-Insert-Firm-2
One set of tires I got from JC for Short course seemed to have a lighter shade of blue inserts are they different?
#5238
are these the inserts that come with SC tires?
http://www.amainhobbies.com/product_...-Insert-Firm-2
One set of tires I got from JC for Short course seemed to have a lighter shade of blue inserts are they different?
http://www.amainhobbies.com/product_...-Insert-Firm-2
One set of tires I got from JC for Short course seemed to have a lighter shade of blue inserts are they different?
#5240
Tech Elite
iTrader: (27)
What tire would give the closest handling characteristics to the ifmar pins for 4wd buggy? The track I runs tire of choice is ifmar pins for 2wd buggy, but the tire is no longer made for the front, and since I just started racing 4wd buggy, I'm trying to figurebuot what to run. I tried holeshot 2.0 front and rear, but they lacked some side bite, so would goosbumps be a step in the right direction, or would you recommend something else?
The track is hard packed sand/dirt with dust, and is very slick when dry. It gets watered between heats and then is pretty tacky, but develops a good bit of loam in the corners, then drys out and is even looser, and suggestions would be great.
The track is hard packed sand/dirt with dust, and is very slick when dry. It gets watered between heats and then is pretty tacky, but develops a good bit of loam in the corners, then drys out and is even looser, and suggestions would be great.
Last edited by symmetricon; 08-05-2012 at 09:31 PM.
#5241
Tech Elite
iTrader: (4)
What tire would give the closest handling characteristics to the ifmar pins for 4wd buggy? The track I runs tire of choice is ifmar pins for 2wd buggy, but the tire is no longer made for the front, and since I just started racing 4wd buggy, I'm trying to figurebuot what to run. I tried holeshot 2.0 front and rear, but they lacked some side bite, so would goosbumps be a step in the right direction, or would you recommend something else?
The track is hard packed sand/dirt with dust, and is very slick when dry. It gets watered between heats and then is pretty tacky, but develops a good bit of loam in the corners, then drys out and is even looser, and suggestions would be great.
The track is hard packed sand/dirt with dust, and is very slick when dry. It gets watered between heats and then is pretty tacky, but develops a good bit of loam in the corners, then drys out and is even looser, and suggestions would be great.
Ray
#5242
Does anyone have a picture of the new jconcepts sway bar installed on a Sc10?
#5243
I used a 2mm longer strew from the get go. I think Im using ofna 2x6mm screws on them to be exact. Works great
#5245
What tire would give the closest handling characteristics to the ifmar pins for 4wd buggy? The track I runs tire of choice is ifmar pins for 2wd buggy, but the tire is no longer made for the front, and since I just started racing 4wd buggy, I'm trying to figurebuot what to run. I tried holeshot 2.0 front and rear, but they lacked some side bite, so would goosbumps be a step in the right direction, or would you recommend something else?
The track is hard packed sand/dirt with dust, and is very slick when dry. It gets watered between heats and then is pretty tacky, but develops a good bit of loam in the corners, then drys out and is even looser, and suggestions would be great.
The track is hard packed sand/dirt with dust, and is very slick when dry. It gets watered between heats and then is pretty tacky, but develops a good bit of loam in the corners, then drys out and is even looser, and suggestions would be great.
What were the new front tires that Maifield was running at the Shootout? They looked liked a Pressure Points variation.
#5248
During the nitro race last month it was super grooved up, but they didn't sweep/clean the track for 1/10th scale, so I ran 3D's in buggy and PP's in SCT. For the Clash, we will be brooming the track for 10th scale .
#5249
Tech Fanatic
iTrader: (36)
I'm thinking Bar Codes front and rear on buggy and truck and either Bar Codes or Pressure Points for SCT. Green or Blue rear and maybe orange front.
During the nitro race last month it was super grooved up, but they didn't sweep/clean the track for 1/10th scale, so I ran 3D's in buggy and PP's in SCT. For the Clash, we will be brooming the track for 10th scale .
During the nitro race last month it was super grooved up, but they didn't sweep/clean the track for 1/10th scale, so I ran 3D's in buggy and PP's in SCT. For the Clash, we will be brooming the track for 10th scale .
#5250