JConcepts Thread
#2027
Tech Elite
iTrader: (13)
Here's a stupid question. I'm going to order these two parts:
1037 - BJ4 Rear MIP CVD, Complete Set
and
1108 - Front Suspension Sleeve (Short)
These two comes in pairs right? For the right and left side of the BJ4WE?
Also, I see the REAR CVD Bone (just the bone) is available, but are the FRONT CVD bones available?
1037 - BJ4 Rear MIP CVD, Complete Set
and
1108 - Front Suspension Sleeve (Short)
These two comes in pairs right? For the right and left side of the BJ4WE?
Also, I see the REAR CVD Bone (just the bone) is available, but are the FRONT CVD bones available?
#2028
Here's a stupid question. I'm going to order these two parts:
1037 - BJ4 Rear MIP CVD, Complete Set
and
1108 - Front Suspension Sleeve (Short)
These two comes in pairs right? For the right and left side of the BJ4WE?
Also, I see the REAR CVD Bone (just the bone) is available, but are the FRONT CVD bones available?
1037 - BJ4 Rear MIP CVD, Complete Set
and
1108 - Front Suspension Sleeve (Short)
These two comes in pairs right? For the right and left side of the BJ4WE?
Also, I see the REAR CVD Bone (just the bone) is available, but are the FRONT CVD bones available?
#2029
Tech Elite
iTrader: (13)
Can the B44's front CVAs be used in conjunction with BJ4WE's castor blocks and steering knuckles (The Losi Part)?
The only difference I can see is that the cup and ball configuration is reversed, where the ball end is on the bone-side and the cup is on the axle-side...
Will I have to use the B44's castor blocks and steering knuckles for this to work?
The only difference I can see is that the cup and ball configuration is reversed, where the ball end is on the bone-side and the cup is on the axle-side...
Will I have to use the B44's castor blocks and steering knuckles for this to work?
#2030
Can the B44's front CVAs be used in conjunction with BJ4WE's castor blocks and steering knuckles (The Losi Part)?
The only difference I can see is that the cup and ball configuration is reversed, where the ball end is on the bone-side and the cup is on the axle-side...
Will I have to use the B44's castor blocks and steering knuckles for this to work?
The only difference I can see is that the cup and ball configuration is reversed, where the ball end is on the bone-side and the cup is on the axle-side...
Will I have to use the B44's castor blocks and steering knuckles for this to work?
Im not really sure about that, perhaps AE could help? I know that the B44 Castor and steering blocks do work on the BJ though.
#2031
Tech Initiate
Andy what is a losi pink or panther clay compatiable tire compound? In the jconcepts 1/10th scale line of tires?
Thanks,
Kobe
Thanks,
Kobe
#2033
Ifmar Worlds WarmUp II video is now up!
http://www.youtube.com/watch?v=7Aq1OxJ3qo8
youtube.com/jconceptsracing
http://www.youtube.com/watch?v=7Aq1OxJ3qo8
youtube.com/jconceptsracing
#2034
Tech Initiate
Thanks Andy, i'll pick up some blues and try them.
#2035
Super Cup race report
http://www.jconceptsracing.net/wordpress/?p=125
or
http://www.jconcepts.net/index.php?/...nts_details/74
http://www.jconceptsracing.net/wordpress/?p=125
or
http://www.jconcepts.net/index.php?/...nts_details/74
#2036
Tech Fanatic
iTrader: (32)
1/10 Buggy Goosebumps Drive another Win
JConcepts products are continueing their Winning Tradition. Round 4 of the Arkansas Championship Off-Road Racing Electric League (www.arcorr.net) resumed competition Sunday August 3rd, 2008. The event was held at our largest raceway, Wolfpack Racetrack (www.wolfpackracetrack.com) in Hot Springs Arkansas. The temperature outside was the hottest (100+) and highest humidity we have faced this season. Our dedicated racers were real troopers as we race during the hottest part of the day.
JConcepts 1/10 Goosebumps Tires and Inserts, again proved up to the task by providing the Grip and Durability in the increasingly highly competitive Expert 4wd Buggy Class. Driver Kirk Crisalli used the same set of tires from the previous event to Win the Expert 4wd Buggy. The 1/10 Buggy Goosebump Front and Rears proved effective in all track conditions from dry to damp clay throughout the day. In the end JConcepts Tires not only finished 1st and 3rd, they also were used to set Fast Lap as well as traction for Kirks wire to wire A-Main time, which beat the TQ Pace set in Qualification by 6 seconds.
Kirk now finds himself atop the Championship Chase with only two events remaining. He is looking forward to a chance to bring home the Crown and believes he has the tires to get the job done.
Congratulations JConcepts
JConcepts 1/10 Goosebumps Tires and Inserts, again proved up to the task by providing the Grip and Durability in the increasingly highly competitive Expert 4wd Buggy Class. Driver Kirk Crisalli used the same set of tires from the previous event to Win the Expert 4wd Buggy. The 1/10 Buggy Goosebump Front and Rears proved effective in all track conditions from dry to damp clay throughout the day. In the end JConcepts Tires not only finished 1st and 3rd, they also were used to set Fast Lap as well as traction for Kirks wire to wire A-Main time, which beat the TQ Pace set in Qualification by 6 seconds.
Kirk now finds himself atop the Championship Chase with only two events remaining. He is looking forward to a chance to bring home the Crown and believes he has the tires to get the job done.
Congratulations JConcepts
Last edited by JDCrow; 08-04-2008 at 12:32 PM.
#2037
Our latest t-shirt design "Cool Gray":
#2043
http://www.jconcepts.net/store/index...cd59bb256ea600
Available in all popular sizes.
#2043
http://www.jconcepts.net/store/index...cd59bb256ea600
Available in all popular sizes.
#2038
Hay Andy how long until we see a body for the O'Donnell Z01-B
#2039
Tech Rookie
I used the stock foam that came with the double dees an would like some more side bite. If I use a firmer foam like bomb one will that give me more side bite? Thanks.
#2040