ChocoTaco73

iTrader: (3)

I am:

thedak

Yep

Jcon - JCO3354Y

22SCT Axles in the front

22X-4 Rear Hubs with 6.0mm Hex

Chpappa

thedak Would you mind sending over a setup sheet? Would love to finish up my TLR 22T 5.0 the same way. Do you prefer the VisionRC rear sway bar over the stock TLR buggy? Hope to tear it up in Houston with the new class they are starting on carpet.

ChocoTaco73

iTrader: (3)

I've never run a rear sway bar on my 22T but I ave on my 22 5.0 and I wouldn't run the TLR sway bat setup. When mounted in front of the tower even the thickest sway bar would allow the rear end to lean over enough that I had to space up the wing because it leaned so much, especially in reducing radius turns after the straight. As soon as I switch to the Vision rear mount that stopped, it was so much better. With the higher center of gravity of the 22T I doubt the stock TLR sway bars would do much.

Rcdad42

https://www.bigsquidrc.com/tlr-annou...or-the-22-5-0/

A longer chassis for the buggy looks like it would be a good place for converting the buggy into a stadium truck.

thedak

Get the RCLyfe or Vision

shortcut3d

I’m looking for the part number for the 22T front sway bar links. I tried online manuals but couldn’t find it. Would appreciate if some could share the part number. Thanks.

SCRAFAN

iTrader: (20)

Anyone how close the longer buggy chassis is in length to the stock truck chassis?

thedak

So far so good. Love these Vision Trucks.

Truck wants to pick up the inside rear in some high speed turns.

Made some changes.

Associated V2 Orange 44mm Springs on the Front

Thicker 1.8mm Front Sway.

6mm front hex

Wheelbase set to as long as possible.

ChocoTaco73

iTrader: (3)

FYI, Vision Racing will be making a new rear shock tower for the 22T to run buggy rear shocks, basically the same one Dakota Phend was using on his over the weekend at the ROAR Nats. Combine that with buggy front tower and shocks and you may have the hot ticket for carpet and high bite clay tracks.