Post your crawler photos here
#1
Post your crawler photos here
Please post your pictures here thanks!
just a thought. use this thread to post up pictures of your rigs. action shots or whatever. lets see if this works.
Give a rundown of your mods and then a couple of pics.
This is mine:
Axial SCX10 Honcho
Mods: waterproof, LRP esc, 12T titan 550 motor, proline front bumper and accessories
Bodies: Proline 72 Bronco and Jeep Comanche
just a thought. use this thread to post up pictures of your rigs. action shots or whatever. lets see if this works.
Give a rundown of your mods and then a couple of pics.
This is mine:
Axial SCX10 Honcho
Mods: waterproof, LRP esc, 12T titan 550 motor, proline front bumper and accessories
Bodies: Proline 72 Bronco and Jeep Comanche
Last edited by roadrashracing2; 03-03-2012 at 09:57 AM. Reason: changed title
#2
All pretty much stock. Lights, Winches and that's about it.
#3
Tech Adept
Nice truck! So many motivating pics in here!
#4
Custom Midguard chassis.
full roll caged proline fj-40
Axial Gearbox has full steel gears
Axial front and rear diffs
rear diff has lower gear range to reduce torque twist.
mip shaft, alloy rims(mounted yesterday, not in pic yet) with 1.9 baja claw tyres.
electronics waterproofed:
Novak rooster running 35t integy, waterproofed hacked out servo.
DIY led kit all around.
full roll caged proline fj-40
Axial Gearbox has full steel gears
Axial front and rear diffs
rear diff has lower gear range to reduce torque twist.
mip shaft, alloy rims(mounted yesterday, not in pic yet) with 1.9 baja claw tyres.
electronics waterproofed:
Novak rooster running 35t integy, waterproofed hacked out servo.
DIY led kit all around.
#7
Tech Rookie
The blue truck is LNC based sportsmen rig with a big block Hobby wing 4300kv motor, it crawls awesome. The bodied truck is my pro 2.2 LCC with 2250kv on 3s. I also have a Venom Creeper sportsmen rig but in the process of making it bodiless so no pix yet.
#8
my venom safari
proline f-100 body, custom built bed,custom built roll bar from a mini blind wand. cut off and hinged hood, rag for a gas cap,parma hemi, painted tire letters,working 3racing winch controlled by radio 3rd channel. proline cooler,gas can. small craftsman air compressor,air hose is made out of a black RX antenna,trailer ball is a broken savage dog bone that i cut the pins off of,and a waffle house tag(broken off of a little flag they put in a piece of pie) and savage bumper lights mounted to the roll bar
runs a losi lipo compatible esc,integy 55T motor(new as of last Saturday) and a 5700 mah 2s lipo. runs for ever on that pack
did this tonight.the box is a rayovac battery carton painted black
in the box are a little piece of tarp rolled up,chain from hardware pack for my new shed,homemade recovery cable with homemade hooks(airplane control cable) and a wrench form a money clip
proline f-100 body, custom built bed,custom built roll bar from a mini blind wand. cut off and hinged hood, rag for a gas cap,parma hemi, painted tire letters,working 3racing winch controlled by radio 3rd channel. proline cooler,gas can. small craftsman air compressor,air hose is made out of a black RX antenna,trailer ball is a broken savage dog bone that i cut the pins off of,and a waffle house tag(broken off of a little flag they put in a piece of pie) and savage bumper lights mounted to the roll bar
runs a losi lipo compatible esc,integy 55T motor(new as of last Saturday) and a 5700 mah 2s lipo. runs for ever on that pack
did this tonight.the box is a rayovac battery carton painted black
in the box are a little piece of tarp rolled up,chain from hardware pack for my new shed,homemade recovery cable with homemade hooks(airplane control cable) and a wrench form a money clip
#9
Still a work in progess, but here is mine:
I started with a small lift:
Needed a front and rear bumper mount:
With some paint:
Shot for my LHS:
Next on the list... lights
I started with a small lift:
Needed a front and rear bumper mount:
With some paint:
Shot for my LHS:
Next on the list... lights
#11
Tech Master
iTrader: (4)
Post your crawler photos here
[Photos] SG Crawlers Scale Trucks trail on 08 Jan 2012
Hi bros,
Some photos taken during our RC 4x4 offroading on 08 Jan 2012.
The Rigs:
9x Land Rover Defender D90 (mixtures of different chassis)
1x Tamiya CC01 Unimog with Trailer
1x Tamiya High Lift Ford F350
1x Axial SCX10 Tundra Tuber
4x Axial Wraith
Total: 16 trucks
Thanks for viewing.
Hi bros,
Some photos taken during our RC 4x4 offroading on 08 Jan 2012.
The Rigs:
9x Land Rover Defender D90 (mixtures of different chassis)
1x Tamiya CC01 Unimog with Trailer
1x Tamiya High Lift Ford F350
1x Axial SCX10 Tundra Tuber
4x Axial Wraith
Total: 16 trucks
Thanks for viewing.
Last edited by roadrashracing2; 03-03-2012 at 09:59 AM. Reason: changed title
#12
my rigs
Wraith not stock n a stock night crawler
#13
Tech Master
iTrader: (45)
Nice body on your Wraith!
Here's mine...
Running gear/specs:
Holmes BRXL Waterproofed on 3s and 4s
Hitec 7950TH Waterproofed
CC BEC @ 7.4V Waterproofed
Tamiya 27T brushed
Loaded Axial Tranny with all Robinson Steel gears
Vanquish Titanium Drag Link/Tie Rod
Axial XR10 Aluminum Knuckles
Axial Aluminum Clocked C Hubs
Custom Aluminum Panels/Roof
Spazstix Chromed Hood
AR60 CVDs
MIP Shafts Front and Rear
Losi 4" Shocks 40wt all around
CAC 2.2 EZ Lock Aluminum BL's on R35 Ripsaws
Custom flip top hood with Traxxas Rustler hood pins
Here's mine...
Running gear/specs:
Holmes BRXL Waterproofed on 3s and 4s
Hitec 7950TH Waterproofed
CC BEC @ 7.4V Waterproofed
Tamiya 27T brushed
Loaded Axial Tranny with all Robinson Steel gears
Vanquish Titanium Drag Link/Tie Rod
Axial XR10 Aluminum Knuckles
Axial Aluminum Clocked C Hubs
Custom Aluminum Panels/Roof
Spazstix Chromed Hood
AR60 CVDs
MIP Shafts Front and Rear
Losi 4" Shocks 40wt all around
CAC 2.2 EZ Lock Aluminum BL's on R35 Ripsaws
Custom flip top hood with Traxxas Rustler hood pins
#14
Nice rig dude
#15
Sweet rigs there guy's. alexchen, ya need to go get that thing dirty.