How to connect 2 button winch controller and 360 servo trx4
 

Hi All,
Looking for help how to connect this setup in my stock Traxxas TRX4.
I have a two button controller and receiver from AliExpress.
I have a 360 servo (but I know how to convert a non-360 servo with gluing the position pot and drilling out a gear).

But I'm confused as how to wire this up. Any help much appreciated.

Will post pic as soon as I figure out how to (need more more posts it seems)

I will advise you about connecting 2 button winch controller and 360 servo trx4 you should search on google. Because three months ago today, I also tried to connect 2 button winch controller and 360 servo trx4 but I could not do it, then I searched for it on Google and I was able to connect 2 button winch controller and 360 servo trx4.!!!!!!!!!
I got all information about it. I got answers to all my questions. If you want to get information about it, then you have to search for it on Google. You will get complete information from Google.

Usually it's pretty simple for a standalone controller. Connect to a power supply, and then connect the output wires to the winch. Not much more to it.

A link to the controller would be helpful, without knowing if it runs on receiver voltage or the battery directly, really can't give much better info.

going to need a power source.to run 2 button rx and 360 servo,,

Thanks for the information.:)