Originally Posted by NLpurplelambo43
(Post 10420497)
Yesterday was a lot of interesting racing. Lots of broken trucks and such.
I broke a rear a arm, a front a arm, a rear chassis plate, and a CVA dogbone. (all a arms and rear chassis plate broken on those goddamn nails) Oh, and I took apart the transmission, and my idler gear isn't looking so nice... AGAIN. I think the topshaft is screwing them up, along with making my truck so loud. Luckily for me, everywhere I've looked that topshaft is out of stock. I could tear apart that B4 Sean gave me but I don't know if I'll have the same problem. So I guess I could take the electronics from my SC10 and stick them in my XXX CR? :lol: I'm glad no one was there to take pictures, I would be embarrassed for people to see how terribly I did. :( Hope everyone else had a [somewhat] good weekend! :nod: |
Originally Posted by NLpurplelambo43
(Post 10422320)
Well the truck has been loud since I built the kit.
I've only stripped one idler. But this one is looking driveable, just not as perfectly molded as a new out of package one. |
Well I asked Sean and Brent and they both said that apparently you either get a good top shaft or a bad one and that's what makes the noise. Also that it shouldn't make a big difference.
I don't like the noise, one of the reasons I got the truck was for that beautiful quiet sound I had heard in most of the AE stuff. :/ I took apart that B4 for the topshaft and tried to see if it made any difference in noise, and it didn't. :confused: |
Originally Posted by NLpurplelambo43
(Post 10422706)
Well I asked Sean and Brent and they both said that apparently you either get a good top shaft or a bad one and that's what makes the noise. Also that it shouldn't make a big difference.
I don't like the noise, one of the reasons I got the truck was for that beautiful quiet sound I had heard in most of the AE stuff. :/ I took apart that B4 for the topshaft and tried to see if it made any difference in noise, and it didn't. :confused: Are you going to April fools? |
Pinion and spur
The noise could also be coming from your pinion and spur gear. I have had that happen before when I flipped the spur gear unintentionally after doing some work to the diff. It was worn in one direction and when I flipped it around to the way it had been worn in, the noise was gone. Just a thought if the top shaft did not work.
I'll be more than happy to look at it next time I see you. |
April Fools? That's for IRCR, right? I wish I could go, I may have to talk to Sean and my mom about it. Would be nice to drive on a smooth track. :ha:
Anyways, I might just have to try that out! Well, actually I'm getting an order from A Main tonight and already had a Kimbrough spur in my cart. Those JConcepts silent speed gears are really expensive, and are out of stock. So I'm sure Kimbrough makes good stuff. Plus a new Losi pinion and that should work out hopefully! Thanks guys. Wondering if I should replace the idler gear? I'm not so sure, it looked about the exact same as that old B4? Here it is (you have no idea how long it took me to take this :lol: ). http://i1204.photobucket.com/albums/...s/DSCN0104.jpg This is the one of two pictures I received from the Colorado Off Road State Championships. They were cropped and resized weirdly. :weird: http://tinyurl.com/6slajrj Did you get your plaque Brad? Mine was spelled "Noha LaVav," hence my signature. :lol: |
:lol:Be proud of the trophy and misspelled plaque... You earned it either way:nod:
|
RC8.2 build
For those who have asked about 1/8 scale. Here is my RC8.2 build. Too bad I can't run in at HDRP :)
https://www.facebook.com/media/set/?...1&l=f7be6887c9 https://fbcdn-sphotos-a.akamaihd.net...73209505_n.jpg https://fbcdn-sphotos-a.akamaihd.net...93715866_n.jpg |
Anyone coming in tonight? I'm gonna miss saturday so hoping to race tonight.
|
Originally Posted by NLpurplelambo43
(Post 10427142)
April Fools? That's for IRCR, right? I wish I could go, I may have to talk to Sean and my mom about it. Would be nice to drive on a smooth track. :ha:
Anyways, I might just have to try that out! Well, actually I'm getting an order from A Main tonight and already had a Kimbrough spur in my cart. Those JConcepts silent speed gears are really expensive, and are out of stock. So I'm sure Kimbrough makes good stuff. Plus a new Losi pinion and that should work out hopefully! Thanks guys. Wondering if I should replace the idler gear? I'm not so sure, it looked about the exact same as that old B4? Here it is (you have no idea how long it took me to take this :lol: ). http://i1204.photobucket.com/albums/...s/DSCN0104.jpg This is the one of two pictures I received from the Colorado Off Road State Championships. They were cropped and resized weirdly. :weird: http://tinyurl.com/6slajrj Did you get your plaque Brad? Mine was spelled "Noha LaVav," hence my signature. :lol: As for the idler gear just replace it you have it out anyway. I would bet that your problem is in the spur and pinion tho.. I haven't had a chance to go get my plaque yet:cry: Everyone seems to have problems spelling your name:confused: |
Right On!
Right on Lavav! Keep up the good work! Yeah let's see if the new spur doesn't fix the noise. I've been wanting to try those new silent speed spurs too but $13 for a spur gear is a little pricey.
|
Originally Posted by A Main Hobbies
1 x Team Associated Rear Arm Mount/Chassis Plate (ASC9818) = $6.39 1 x Losi 48P Pinion Gear (21T) (LOS4121) = $4.59 1 x Kimbrough 48P Slipper Gear (84T) (KIM312) = $5.49 1 x Losi 48P Pinion Gear (23T) (LOS4123) = $4.59 1 x Pro-Line 12mm Wheel Adapters (2) (PRO6064-05) = $9.49 1 x Team Associated Shock Rebuild Kit (4) (ASC6440) = $3.69 1 x JConcepts Bar Codes Short Course Tires (Gold) (2) (JCI3044-05) = $17.49 1 x Team Associated KMC Wheel w/12mm Hex (Black) (2) (ASC91101) = $7.29 1 x Team Associated CVD Rebuild Kit B4/T4/GT (ASC7381) = $7.79 ------------------------------------------------------ Sub-Total: $66.81 USPS Priority Mail: $0.00 Total: $66.81 I feel bad for not buying from HDRP, but getting all this sent to my door with free shipping is just convenient. One thing I will be getting from Andy is the dog bones. So I don't have to feel absolutely terrible about it. :rolleyes: |
Track.
I think this track is waaay sick.
http://www.youtube.com/watch?v=u0H6p...feature=colike I've been watching the EOS series and wanting to do more indoor offroad like I did at RRCP. Just messing around and having fun. I had more fun there than I've had in months at HDRP. I prolly won't be back until we get a track rebuild and the track is packed. May not race until we hit Vegas, we'll have to see. Oh and by the way Noah you shouldn't feel guilty about buying parts you need. If you can't get them locally ya gotta buy em somehow. |
Originally Posted by firestardesign
(Post 10450200)
I think this track is waaay sick.
http://www.youtube.com/watch?v=u0H6p...feature=colike I've been watching the EOS series and wanting to do more indoor offroad like I did at RRCP. Just messing around and having fun. I had more fun there than I've had in months at HDRP. I prolly won't be back until we get a track rebuild and the track is packed. May not race until we hit Vegas, we'll have to see. Oh and by the way Noah you shouldn't feel guilty about buying parts you need. If you can't get them locally ya gotta buy em somehow. Sean, you like carpet off road check this out. Dustin makes a great pass at the end!!!
This is a great video. Yes its NITRO!!!
|
You might feel bad ordering from amain but you'll feel like a sucker ordering them them through HDRP so don't feel bad Noha, we get it. If I ask for another part from Andy that he should have but doesn't, and then insultingly offers to order it for me, I think I am going to make a cardboard sign and using a black marker scrawling in very bad handwriting in capital letters, "Will order parts for you for $5".
|
All times are GMT -7. It is currently 12:18 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.