Radio Contro Racers Edmonton Off Road Racing
#751
Tech Master
iTrader: (2)
What can it do...
Can't say without taking a look at what you've done, but TrackSide R/C has a bunch of tools such as
- Gear Ratio Calculator
- Fuel Economy (for nitro guys)
- Fuel Mixture guide (for oil mixture of nitro fuel)
- Frequency Guide (for people who don't memorize the charts)
- Stop Watch (yours would have this)
- Practice Timing (Run a practice race with up to 4 of your buddies)
- Not sure how detailed you track the setup itself, but I track stuff like roll center, corner weights, weight bias, way too much info to put here. It's totaly user customizable.
I actually haven't been pushing the PDA version. In all honesty I'm probably gonna scrap it. Most of our clients use lap tops running the PC version.
Not sure if this forum appreciates comercial posts, which this could technically be construed as, so If you want send me an e-mail. [email protected]. Or we can have an information exchange @ the track sometime.
Later.
- Gear Ratio Calculator
- Fuel Economy (for nitro guys)
- Fuel Mixture guide (for oil mixture of nitro fuel)
- Frequency Guide (for people who don't memorize the charts)
- Stop Watch (yours would have this)
- Practice Timing (Run a practice race with up to 4 of your buddies)
- Not sure how detailed you track the setup itself, but I track stuff like roll center, corner weights, weight bias, way too much info to put here. It's totaly user customizable.
I actually haven't been pushing the PDA version. In all honesty I'm probably gonna scrap it. Most of our clients use lap tops running the PC version.
Not sure if this forum appreciates comercial posts, which this could technically be construed as, so If you want send me an e-mail. [email protected]. Or we can have an information exchange @ the track sometime.
Later.
#752
Wow, very impressive, I have gear ratio calculators too, and some other stuff, but I can only time three cars at once, I'd like to talk to you later though, very cool stuff you got.
#754
Servo For Sale
JD
Give me a call and we can discuss a price
431-9731
Rob
Give me a call and we can discuss a price
431-9731
Rob
#755
Track Update!
Huge day today!
We unloaded the drivers stand from the trailer with two large forklifts and placed it on the ground just behide where it will be placed then Dennis, Daryl, Miles and myself set up the forms for the piles, leveled the platform that the drivers stand will be placed on and poured the cement in to the piles. Sounds EZ, trust me it was a total pannick. Thank God, Warren showed up to help out and finish off the mess we started. By the end of the day it was set in stone or cement any way.
We should be able to place the drivers stand on the platform by Friday, just in time for Saturdays first race of the 2003 season. Your eye level should be around 19' from the track surface, THE TOWER OF POWER, will be ready for you to put the smack down.
I'm burnt, Dennis is pluged, Daryl is hanging in there and Miles, well he's Miles.
Later, Tube Boy.
We unloaded the drivers stand from the trailer with two large forklifts and placed it on the ground just behide where it will be placed then Dennis, Daryl, Miles and myself set up the forms for the piles, leveled the platform that the drivers stand will be placed on and poured the cement in to the piles. Sounds EZ, trust me it was a total pannick. Thank God, Warren showed up to help out and finish off the mess we started. By the end of the day it was set in stone or cement any way.
We should be able to place the drivers stand on the platform by Friday, just in time for Saturdays first race of the 2003 season. Your eye level should be around 19' from the track surface, THE TOWER OF POWER, will be ready for you to put the smack down.
I'm burnt, Dennis is pluged, Daryl is hanging in there and Miles, well he's Miles.
Later, Tube Boy.
Last edited by dabalaberda; 05-29-2003 at 05:29 AM.
#756
DRIVERS STAND IS IN PLACE!
Cool
The Tower of Power is in place. Still have lot's to do before we race Sat. Things to do, water sod, pick up rocks, nail down weeping tile. Come out tonight or early early Saturday.
see you there Daryl
The Tower of Power is in place. Still have lot's to do before we race Sat. Things to do, water sod, pick up rocks, nail down weeping tile. Come out tonight or early early Saturday.
see you there Daryl
#757
Trade anyone? (ill bye too)
Hey there does anybody want to tradae me some kyosho 10 spoke (white or gunmettal) rims for my green ones.
#758
BTW I will only bye or trade for kyosho 10 spokes
#759
oooooooo
oooooooooooooooooo im TQ challenger
#761
LET'S GET READY TO RUMBLE!
Race Day Saturday May 31, show early to help clean up some last min. things. Memberships available at the meeting before the race. Pack up your gear and come on down.
#762
That was an asum day of racing I would just like to say thank you to all the people who helped me out yesterday
David
David
#763
That WAS awsome, I had so much fun, even though I broke on the first lap of my main, I had an absolute BLAST Speaking of breaking, does anyone have a spare right front hub for an Ofna Ultra?
#764
Great race, great track. What an awesome show of support from the members of the club there. Everyone helped out together to put on a great event. I'm sure the Edmonton club will put on a first class race next weekend. Can't wait.
Thanks for the arm Chris, I'll replace as soon as I can find one. Thanks Steve for the quick fuel stops. When you pit every 2 laps I guess they need to be fast. Haha.
Thanks for the arm Chris, I'll replace as soon as I can find one. Thanks Steve for the quick fuel stops. When you pit every 2 laps I guess they need to be fast. Haha.
#765
Del you still owe me 20 bucks for helping you to win
you do remember
you do remember