78LikesBuy / Sell
09-21-2016, 07:34 PM
Tech Regular
FS: Tekin 4300kv Pro4HD and 4000kv Pro4 Sensored Brushless Motors
Sold: thanks all!
Last edited by PetRock; 09-26-2016 at 04:16 PM.
09-21-2016, 08:26 PM
Tech Regular
iTrader: (3)
NEW
Tamiya M-05 V2-R almost ready to run, everything is there, just need to do some soldering. NEW Tekin RS Spec ( not soldered ), NEW SR 415 receiver, NEW Sky Rc motor, Orion servo, NEW super soft tires ( not glued yet ) NEW Tamiya Carbon front tower, built short for the old cooper body that is clear as you can see, 3 batteries Protek (new) Orion (used) Orca (used). Over a grand invested. $550 obo plus shipping. I was thinking about running this but I have too many classes this season. Car is sitting at ATD Hobbies
Last edited by Shaun B22; 10-24-2016 at 01:43 PM.
09-22-2016, 11:11 PM
HPI 5th scale Baja 2wd buggy
HPI 5th scale Baja buggy, 29 cc 4 bolt motor, new this season, Hitec 5765mh steering servo, high voltage capable, metal gear digital, 1/2 " rear extensions, non C clip front axles, Turtle racing side plate, clutch housing, grabber clutch bell and pinion gear. 2 race old Kaos rear and Blade front tires. HPI power slipper clutch, stainless front end brace, 3mm stainless bolts on beadlocks, spare screw kit, bearing kit and a hockey sock full of spare parts. Stainless brake mount with shoe modification. Also has high flow fuel lines and RPM rear bumper and guard assembly with spares. Located in Hamilton. This buggy came in 2nd in B Main at Canadian 5th Scale Nationals at Walton, On. Will be sold after final race this season, Sept 25th. Spent over $1800. will sell for $800. with all spares and parts on hand. Looking mainly for cash to fund upcoming carpet season. Cannot upload pics so send email address and will send pics, thanks.
09-23-2016, 02:46 PM
Tech Fanatic
iTrader: (8)
Hey everyone!
I'm considering getting back into Stock 17.5 TC. I was wondering if there are any TC's that people would be interested in selling. I'd prefer a roller as I have electrics to put into it and I'd really prefer it to come with some spares if possible.
This is just for having fun locally so I'm not looking for the latest/greatest! Brands that I'm particularly interested in include Schumacher, Tamiya and VBC.
Let me know what you have (if anything) with a PM here!
Cheers!
I'm considering getting back into Stock 17.5 TC. I was wondering if there are any TC's that people would be interested in selling. I'd prefer a roller as I have electrics to put into it and I'd really prefer it to come with some spares if possible.
This is just for having fun locally so I'm not looking for the latest/greatest! Brands that I'm particularly interested in include Schumacher, Tamiya and VBC.
Let me know what you have (if anything) with a PM here!
Cheers!
09-23-2016, 06:05 PM
Hey everyone!
I'm considering getting back into Stock 17.5 TC. I was wondering if there are any TC's that people would be interested in selling. I'd prefer a roller as I have electrics to put into it and I'd really prefer it to come with some spares if possible.
This is just for having fun locally so I'm not looking for the latest/greatest! Brands that I'm particularly interested in include Schumacher, Tamiya and VBC.
Let me know what you have (if anything) with a PM here!
Cheers!
I'm considering getting back into Stock 17.5 TC. I was wondering if there are any TC's that people would be interested in selling. I'd prefer a roller as I have electrics to put into it and I'd really prefer it to come with some spares if possible.
This is just for having fun locally so I'm not looking for the latest/greatest! Brands that I'm particularly interested in include Schumacher, Tamiya and VBC.
Let me know what you have (if anything) with a PM here!
Cheers!
09-23-2016, 09:46 PM
also looking for a 17.t stock tc as close to ready to throw in an rx as possible, cheaper the better lol
09-23-2016, 11:10 PM
09-24-2016, 09:10 PM
1/14 Losi Mini 8-Truggy Sold! Sold! SOLD!
low ballers will not be replied. Price is a Firm 220$ not including shipping.
Upgrades
-Shimmed Diffs
-Hitec 5245MG servo installed
-Traxxas 380 VXL motor 4000kv (installed)
-RPM ball Cups
-Hot Racing Spur Gear 60T 48P harden steel
-Hot Racing Pinion 12T 48P harden steel
-Maxamps 3D printed battery Tray with a 2s 1850mAh 100c
-1/10 Proline Gladiators Stadium truck tires.
Stock stuff
-Tires that it came with
-Brushless motor not installed 4500KV
-Stock ESC
-Stock servo
-container with some parts.
*Pictures wont upload
Email me at [email protected] or text (780) 655-4914
low ballers will not be replied. Price is a Firm 220$ not including shipping.
Upgrades
-Shimmed Diffs
-Hitec 5245MG servo installed
-Traxxas 380 VXL motor 4000kv (installed)
-RPM ball Cups
-Hot Racing Spur Gear 60T 48P harden steel
-Hot Racing Pinion 12T 48P harden steel
-Maxamps 3D printed battery Tray with a 2s 1850mAh 100c
-1/10 Proline Gladiators Stadium truck tires.
Stock stuff
-Tires that it came with
-Brushless motor not installed 4500KV
-Stock ESC
-Stock servo
-container with some parts.
*Pictures wont upload
Email me at [email protected] or text (780) 655-4914
Last edited by Schs2013; 09-29-2016 at 04:59 PM. Reason: SOLD!
09-25-2016, 09:30 AM
Tech Master
iTrader: (8)
Selling all Carpet cars
Ofna automatic tire truer. Comes with TC arbour and Hudy pan car arbour and hudy cutting bit $100
Have a Fantom fr1 for sale. Lightly used. Less than 3 hours total runtime
Asking $80 firm. Paid $175 Canadian
Also have a 10r5.1 will come with a servo and a Killshot 10.5t
$100
And last but of course not least
A 12r5.2 with a nip chassis ( stock one is beat but can still take some more abuse ) Car as a roller $150 with new chassis
Or ARTR with lrp mod+stock spec, an MKS TG servo and either a fantom fr1 13.5 for stock racing or an lrp x12 4.5t for mod racing
Will throw in various tires new and used. $400 OBO.
Sorry no trades. Cash only. Pm me your # for more details
Ofna automatic tire truer. Comes with TC arbour and Hudy pan car arbour and hudy cutting bit $100
Have a Fantom fr1 for sale. Lightly used. Less than 3 hours total runtime
Asking $80 firm. Paid $175 Canadian
Also have a 10r5.1 will come with a servo and a Killshot 10.5t
$100
And last but of course not least
A 12r5.2 with a nip chassis ( stock one is beat but can still take some more abuse ) Car as a roller $150 with new chassis
Or ARTR with lrp mod+stock spec, an MKS TG servo and either a fantom fr1 13.5 for stock racing or an lrp x12 4.5t for mod racing
Will throw in various tires new and used. $400 OBO.
Sorry no trades. Cash only. Pm me your # for more details
Last edited by bambikilr; 09-28-2016 at 09:58 AM. Reason: More stuff
09-25-2016, 09:00 PM
Tech Regular
iTrader: (6)
Looking for Trinity d4 or 24k 17.5 and 21.5 motors....lmk.
09-26-2016, 07:48 PM
Team Associated B5M
sold
Last edited by "G-DOT"; 10-01-2016 at 05:31 PM.
09-26-2016, 07:56 PM
PROTEK RC ENGINE HEAD HEATER
..
Last edited by "G-DOT"; 10-26-2016 at 08:18 PM. Reason: sold
09-27-2016, 11:36 AM
For sale
Edit sold
Last edited by rcnickv; 12-19-2016 at 07:17 PM.
09-27-2016, 01:04 PM
Traxxas TQi
Looking for a Traxxas TQi transmitter and receiver. Located in Ontario.
Thanks
Thanks
09-27-2016, 10:37 PM
Tech Fanatic
iTrader: (8)
FS - BNB Hobbywing Xerun 150A 1/8th scale ESC + 1800KV motor
Hello!
I have for sale a brand new in box Hobbywing Xerun 150A 1/8th scale ESC and a Hobbywing 1800KV 1/8th scale sensored motor.
Bought them last year thinking I'd try e-buggy but never did so now they're just collecting dust!
Asking SOLD I'm in Calgary and would prefer a local sale but would consider a deal that included shipping elsewhere. I'll accept cash, Paypal or Interac e-transfer. Please PM me here with any questions.
Cheers!
I have for sale a brand new in box Hobbywing Xerun 150A 1/8th scale ESC and a Hobbywing 1800KV 1/8th scale sensored motor.
Bought them last year thinking I'd try e-buggy but never did so now they're just collecting dust!
Asking SOLD I'm in Calgary and would prefer a local sale but would consider a deal that included shipping elsewhere. I'll accept cash, Paypal or Interac e-transfer. Please PM me here with any questions.
Cheers!
Last edited by Hyper_Mike; 10-22-2016 at 09:25 PM.