Like Tree80Likes

Buy / Sell

Old 11-04-2012, 02:07 PM
  #7471  
Tech Fanatic
iTrader: (37)
 
BCbud's Avatar
 
Join Date: Sep 2009
Location: Victoria BC Canada
Posts: 763
Trader Rating: 37 (100%+)
Default

Never mind
BCbud is offline  
Old 11-04-2012, 05:36 PM
  #7472  
Tech Fanatic
iTrader: (3)
 
Join Date: Apr 2003
Location: Calgary, Alberta
Posts: 780
Trader Rating: 3 (100%+)
Default

WTS my Losi XXX-SCT. It's never been ran on dirt. Ran once on pavement. Then TLR can out with the 22 SCT. The car has no scratches on it. Comes as a roller with no electronics and a clear pre cut body.

Asking $100
Ophidian is offline  
Old 11-05-2012, 09:07 PM
  #7473  
Tech Regular
 
draggerdude's Avatar
 
Join Date: Aug 2011
Location: NE Dungeon
Posts: 419
Default

Originally Posted by draggerdude

I am wondering if anyone has any "OLD" Tamiya bearings they would like to part with. Let me know, Thanks.
bump
draggerdude is offline  
Old 11-06-2012, 09:11 AM
  #7474  
Tech Elite
iTrader: (18)
 
axle182's Avatar
 
Join Date: Jul 2004
Location: Calgary, Alberta
Posts: 3,785
Trader Rating: 18 (100%+)
Default

Looking for a few Futaba low profile servos, 9551's etc. Cash ready or I have a few high end 12th servos to trade, if required. Let me know via PM
axle182 is offline  
Old 11-06-2012, 11:11 AM
  #7475  
Tech Initiate
 
racenuts's Avatar
 
Join Date: Aug 2004
Posts: 46
Default For sale

S O L D

Last edited by racenuts; 11-08-2012 at 06:05 PM.
racenuts is offline  
Old 11-06-2012, 07:28 PM
  #7476  
Tech Elite
iTrader: (26)
 
stulec52's Avatar
 
Join Date: May 2002
Location: Calgary
Posts: 3,216
Trader Rating: 26 (100%+)
Default TC4 and 3s and parts

Sold

Last edited by stulec52; 11-07-2012 at 05:00 PM.
stulec52 is offline  
Old 11-07-2012, 04:28 PM
  #7477  
R/C Tech Elite Member
iTrader: (6)
 
Jordan Anderson's Avatar
 
Join Date: Mar 2004
Location: Calgary, AB, Canada
Posts: 1,274
Trader Rating: 6 (100%+)
Default

Originally Posted by Jordan Anderson


LRP - X12L 4.5 turn - Used for 2 x 8 min runs (16 minutes total run time) in SC10 4x4. Temp ~180-185F after each 8 min run which is apparently normal for these LRP motors.
$90

Located in Calgary, AB.

OBO, I'd rather see someone get some use out of this motor than see it go to waste just sitting in it's package...

Would trade for 17.5 turn, Orca 2200 combo, etc.
Jordan Anderson is offline  
Old 11-07-2012, 07:29 PM
  #7478  
Tech Regular
iTrader: (4)
 
Mister Pink's Avatar
 
Join Date: Dec 2010
Location: faraway from reality
Posts: 357
Trader Rating: 4 (100%+)
Default

WANTED!

K.O. VFS 1

OR

LRP QC3
Mister Pink is offline  
Old 11-08-2012, 04:52 PM
  #7479  
Tech Apprentice
 
Join Date: Feb 2010
Posts: 58
Default 2 tc3 for sale

I have two tc3 for sale both are rollers and come with extra parts there is a gt class body and about 5 other bodies all of it for 100 obo$

Jason
jayhart76 is offline  
Old 11-08-2012, 09:02 PM
  #7480  
Tech Adept
iTrader: (9)
 
Electrolabs's Avatar
 
Join Date: Dec 2004
Posts: 246
Trader Rating: 9 (100%+)
Default Team Associated B44 rolling chassis with upgrades

Moved to Buy/sell section

Last edited by Electrolabs; 11-18-2012 at 10:45 AM.
Electrolabs is offline  
Old 11-09-2012, 03:19 PM
  #7481  
Tech Regular
iTrader: (6)
 
Join Date: May 2011
Location: GreatWhiteNorth
Posts: 362
Trader Rating: 6 (100%+)
Default

Is the sc10 still available? I'm not getting a reply to PMs

Originally Posted by Rnuovr
Price updated - please let me know if you want pics of anything specific

also have a RPM castor and camber gauges that I will include
Originally Posted by Rnuovr
I have decided that it is time to sell my Team Associated SC10 FT I put this truck together at the beginning of the summer and never really used it -the truck has literally only been raced 1 night and 1 practice session.
The truck has a few hopups on it (this truck is so good out of the box it really doesn't need much more done to it)

- STRC blue aluminum rear hubs and front bulkhead NIP
-12 mm hex conversion on truck (forget brand)
- RPM rear hubs, front bumper/skid & front bulkhead, gear cover & frnt arms all currently installed on the truck
- Aluminum steering rack installed in truck
- All extra spurs and pinion gears I have for it (have a few of each)

I have a large amount of Panther tires for it, I have 6 complete sets, all on brand new never glued new proline wheels (wheels are white, yellow & black and are slash protract offset - also 1 full set of proline sc beadlocks)

Rattler - 1 set (4) medium - 1 set (4) clay

http://www.panthertires.com/IMG/prod...SC/rattler.jpg

Raptor - 1 set (4) medium - 1 set (4) soft

http://www.panthertires.com/IMG/prod..._SC/raptor.jpg

Switch- 1 set (4) in medium - 1 set (4) soft

http://www.panthertires.com/IMG/prod...switch_2.0.png

also have a set (4) of green dot proline holeshots mounted to HPI Blitz wheels

I spent at least $500 just on wheels/tires and never used them.

The truck is currently rtr with a Tekin RS pro esc and 13.5T redline motor. Servo is a futaba HV S3051HV (NIP) & Tekin hotwire (NIB) as well as a duratrax pit stand. The truck comes with a custom painted stock SC10 body & has the v2 aluminum shocks. I have a few spare parts (all stock parts) for the truck including a GPM chassis brace also that I will include also.

I have 5 lipo's for it - 1 practice battery and 4 race batteries (2 never used or charged Turnigy Nano-Tech 5300 mah 50-100c - 2 Protek 5000 mah 30c & one Turnigy 5000mah 25c, these last 3 have been used) all batteries are hard case and have deans connectors.

This is pretty much a full rtr race setup and you only need a charger and transponder to go racing - I have well over $1500 into this and I know that I won't get out of it what I have in it but I would rather see someone use it over it continuing to sit on my desk collecting dust.

I am asking $625 Shipped for the whole package if you are really interested let me know and I am sure we can work something out.

**Prices for items separated** Prices include shipping in Canada ONLY

I will take $375 for the truck ARTR - transponder shown in pics will NOT be included, but will include the STRC parts not yet installed as well as all the spare truck parts & pinions/spurs that I have. I can also sell it as a complete roller also for $200 (with all hopups).
I will take $180 for the whole tire lot (again they are all new, all have closed cell foams (blue prolines or orange panther foams) - including the 4 proline beadlocks.
I will take $110 for the 4 good batteries (2 Turnigy Nano-Tech 5300 mah 50-100c - 2 Protek 5000 mah 30c)

Paypal only (unless local)

Would be interested in trades for offroad nitro only (nice truggy or another Savage) - Picco .28 motor - ofna 86 or 87 pipe or savage flux roller (mainly looking for the bulkheads & diffs)
brew99 is offline  
Old 11-12-2012, 06:03 AM
  #7482  
Tech Apprentice
 
Join Date: Aug 2001
Posts: 62
Default

Still available....


Originally Posted by neons
Losi 8ight-E 2.0
Tekin T8 1900 motor
Tekin RX8 ESC
16t pinion
Thunder Power 4S 5400mah hard-case ROAR batteries (x2)
XP1015 Servo
Losi Aluminum Servo Horn
DE Racing Front BumpSkid
DE Racing Rear Arm mud guards
1 set of completely worn out Losi XBB wheels/tires (kit tires, used for street)
2 sets of AKA Gridirons (super soft, both sets about 50% worn)
2 Losi bodies. One just painted and run one practice day.

Car has been run two practice days at Hardcore, 1 practice day at Universal and 1 race day at Universal and a few runs up and down my street.

Diffs and shocks just re-built before last practice day at Hardcore. Front centre CVD also replaced before last practice day at Hardcore.

Just add your RX and start running.

Asking $500. Buyer pays shipping.






neons is offline  
Old 11-12-2012, 06:46 PM
  #7483  
Tech Addict
iTrader: (17)
 
Join Date: Oct 2003
Location: canada eh
Posts: 646
Trader Rating: 17 (100%+)
Default

BMI DB12RR Race ready 12th scale MINT CONDITION! not a mark!>>>>> comes with>>>

Thunder power 5000 40c 1 cell lipo
SMC 4000 25c 1 cell lipo
novak smart boost
Hot Bodies center shock (probably best in industry)
NIP CRC Delrin steering knuckles
3 spurs 73/92 and a kimbrough 88 with diff covers
Acer diff bearings (diff rox tungsten)
lunsford Ti turnbuckles
Xray Servo saver (super accurate)
nip .020 springs
.022/.020/.018/.022/.019 front spring sets
CRC front alluminum Caster blocks/mounts 5deg
futaba 59650 digital mini servo
6 fiberglass "hockey sticks"
4 carbon "hockey sticks"
Kimbrough servo saver complete with lunsford Ti turnbuckles
Whole tree of associated ball ends
Ti front axles and spare set
Spare rear pivot block
diff rings
4 crc delrin diff nuts
4 extra wheel bearings and 1 extra diff bearing
extra set of king pins
full set of ride hirghet adjusters and spacers front and rear...
2 extra front arms
asc gold and blue springs plus nib associated Hard Green springs

Tires..
on car double pink front yellow rear
in bags
2 sets of double pink fronts
3 sets of pink rears
2 sets of yellow rears
1 set of new purple fronts
1 set of new yellow rears

three bodys 2 painted one new clear in good shape

no speed control/reciever or transponder

Sold as listed for 250 obo

add 17.5 duo2 for 60 on top

email is [email protected]

more pics and if you have any other questions just ask

Dont mind the wire clutter and the monster truck reciever its all i had at the time LOL

I had prepped the car totally for this race here in one day... V


http://www.youtube.com/watch?feature...&v=eQYapJpaS7s

it was the last time I raced the car... as you can see I race touring cars too and off the start i wasnt used to the loose rear i was a lil punch happy but i settled in lol ... the car is clamped it was a pleasure to own and drive im going to miss her

Due to sponsorship contract I must sell.. my loss is your gain

more pics are available if requested

email works good [email protected]
Attached Thumbnails Buy / Sell-2012-02-18-17.59.26.jpg   Buy / Sell-2012-02-18-17.56.24.jpg   Buy / Sell-2012-02-18-17.55.54.jpg   Buy / Sell-2012-02-18-17.56.36.jpg   Buy / Sell-2012-02-18-17.59.54.jpg  

endler is offline  
Old 11-12-2012, 06:49 PM
  #7484  
Tech Addict
iTrader: (17)
 
Join Date: Oct 2003
Location: canada eh
Posts: 646
Trader Rating: 17 (100%+)
Default xxx4 parts by the bucket! more to come!

sold
Attached Thumbnails Buy / Sell-2012-02-19-00.40.50.jpg  

Last edited by endler; 11-13-2012 at 07:18 PM.
endler is offline  
Old 11-12-2012, 07:25 PM
  #7485  
Tech Addict
iTrader: (17)
 
Join Date: Oct 2003
Location: canada eh
Posts: 646
Trader Rating: 17 (100%+)
Default the rest!

sold
Attached Thumbnails Buy / Sell-2012-11-12-22.32.32.jpg  

Last edited by endler; 11-13-2012 at 07:18 PM.
endler is offline  

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 29 votes, 3.59 average.

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.