R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Buyer/Seller dispute and discussion forum (https://www.rctech.net/forum/buyer-seller-dispute-discussion-forum-18/)
-   -   MADMAN23 (DARYL SHARLOW) = DISHONEST SELLER!!! (https://www.rctech.net/forum/buyer-seller-dispute-discussion-forum/197974-madman23-daryl-sharlow-%3D-dishonest-seller.html)

paulsrc 12-30-2007 02:14 PM

MADMAN23 (DARYL SHARLOW) = DISHONEST SELLER!!!
 
5 Attachment(s)
I traded my XXX-T MF1 roller + parts for his supposedly brand new Duratrax Vendetta. In his ad he was advertising a "brand new vendetta." I asked him about the condition of the car over PM and he said he never ran it and that it was "brand new." Now fast forward a couple of days later and this is what I got. Granted that the car is still in great condition. But it is way far from "brand new."

Problems I see:
1) Rear hinge pins bent
2) Rear hinge pin cover bent
3) The "brand new duratrax 1200 nim. battery pack" registering less than 4 volts when I plugged it into my ICE charger. Shrink wrap messed up, etc. Daryl later admitted it's not brand new and that he used it a few times.
4) Scracthes and gashes all over the underside, bumper, wing, shock towers (probably from flipping over) and the supposedly "new duratrax blue alum. rear hub's."
5) Mud caked onto various parts on the car. This is the ultimate proof that the car has indeed been used and not "brand new" like madman23 said in his ad.
6) Radio system not working (extreme glitching)
7) VR 3 motor cuts off at full throttle, presumably toast

I am not an unreasonable person but at the same time, I would greatly appreciate a bit of honesty. If madman23 had only listed in his ad that the vendetta is "lightly used" then I would not make a big deal at all. But of course, Daryl had to list it as "brand new."

Having said that, I am willing to overlook a few of the things I mentioned above but I should at least be reimbursed for the broken parts. Of course, the whole time we were talking through email, Daryl just denied everything, saying that the car is brand new, never used. I sent him these pics below and still he thinks that he sold me a "brand new" car.

Daryl, how old are you? By the way you try to avoid any type of responsibility, you're acting like an 8 year old boy.

paulsrc 12-30-2007 02:15 PM

2 Attachment(s)
Also, the servo was hot glued to the chassis and he dared tell me that this is how it came stock. Also, I checked the VR3 motor and the comm is in pretty bad shape and apparently, Daryl thinks it's "almost new."

Like I said before, this wouldn't have been a big deal had Daryl (madman23) been more honest in his ad description...

All you other guys can decide if these items are "brand new" or not...

ChadRacing 12-30-2007 02:49 PM

Paul im agree with you that car has been used because of everything you showed in pics. And from what i know no car comes with the servo hot glued to the chassis

xsxracing 12-30-2007 03:30 PM


Originally Posted by ChadRacing (Post 4020520)
From what i know no car comes with the servo hot glued to the chassis

Interesting

xsxracing 12-30-2007 03:31 PM

WOW,Cant belive MadMad would do these :weird::weird::weird::weird::weird::weird::weird:.

paulsrc 12-30-2007 04:05 PM


Originally Posted by xsxracing (Post 4020619)
WOW,Cant belive MadMad would do these :weird::weird::weird::weird::weird::weird::weird:.

Believe it or not, he did. Oh, and I found out that one of the cells in the battery pack is bad. The pack registered 3.9 volts when I hooked it up to the ICE charger. When I charged it up, one of the cells basically started sizzling, emitting smoke and a some kind of fluid (battery acid?) leaked out. Good job, Daryl, I could've burned my house down.

MADMAN23 12-30-2007 04:11 PM

this is madman curtis... if you seen my brother xxx t that he got from him .. you would be scared ... and had every 1 beliveing that it was a mf2... when he put the ad on here this site was not runing right .. when he put new .. what did't go on there was almost new... and when he ask where the extra part's .. he said that they were not included.. as must of you know i don't get rid of junk... i have feedback to back it up... and i will warn all my friend's about him... and the reason he put hot glue on the servo .. is because to hold down the servo as any vendetta own know that the 2 way tape come off.... my brother has 1 more detta and so do i...

paulsrc 12-30-2007 04:24 PM

I admitted that I mistook my MF1 truck as an MF2. I bought it from a friend last year and never really paid that much attention. I told you all this information from day one. You knew you were trading for an MF1. I also told you the truck was used for one year and to expect wear from being raced on dirt. You fully consented to the trade. I didn't hold you at gun point. I was honest with you from day one. I even threw in $50 worth of extra parts into the deal.

You, on the other hand, lied about the buggy being "brand new." I can tell that your buggy has been ran at least a half dozen times just from looking at the damage and dirt on the chassis.

MADMAN23 12-30-2007 04:25 PM

http://i54.photobucket.com/albums/g9...Picture316.jpg

here 1 of the pic i still have... dose that look junk to you..

MADMAN23 12-30-2007 04:27 PM

also you said that you bought it new... .......... and as far as extra.. what 3 spur gear.. and other part i need on the truck to be fixed..

MADMAN23 12-30-2007 04:29 PM

and you probley cook the battery pack.. as you should charge them at 1.5 amb...

paulsrc 12-30-2007 04:34 PM

You just don't seem to get my point. So here it is plain and simple: YOU LIED. In your ad, you said that all the stuff you were trading with is brand new. Guess what??? THEY'RE NOT! So stop this "oh you gave me a used truck too" crap because that's just BS. You knew you were getting a used truck. That was the trade agreement!

paulsrc 12-30-2007 04:35 PM


Originally Posted by MADMAN23 (Post 4020782)
and you probley cook the battery pack.. as you should charge them at 1.5 amb...

I charged it at 1.0amp. Care to explain why the voltage was at 3.9V?

MADMAN23 12-30-2007 04:37 PM

yea but i did't know that it would need some many part's .. and as i said before the site was not acting right when he put it on here... and the xxx t is not even a mf1 it has many xxx t part's on it... so stop acting like a kid and move on...

paulsrc 12-30-2007 04:39 PM


Originally Posted by MADMAN23 (Post 4020810)
yea but i did't know that it would need some many part's .. and as i said before the site was not acting right when he put it on here... and the xxx t is not even a mf1 it has many xxx t part's on it... so stop acting like a kid and move on...

The XXX-T is an MF1. The only parts that are not graphite are the hub carriers and spindles. Everything else (ie. tranny, chassis, arms, shock towers, etc.) is straight MF1! STOP LYING!!! Seriously, you are such an habitual liar.


All times are GMT -7. It is currently 05:55 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.