Round 2 HOBBYWING TRI- SERIES @ CASINO
#1
Round 2 HOBBYWING TRI- SERIES @ CASINO
CORRCCA is proud to be running the 2nd round of the HOBBYWING TRI-SERIES @ CASINO. On the 2/3 February 2019.
On the nomination form at the bottom below Transponder No and class please put how many sets of tires.
Tires are XPRESS 36X @ $40 per set
21.5 Open Min 1 set Race Tires MAX 2 sets
13.5 Stock Min 1 set Race Tires MAX 2 sets
If you need practice sets put them with a P next to them.
http://docs.google.com/forms/d/e/1FA...3abzg/viewform
On the nomination form at the bottom below Transponder No and class please put how many sets of tires.
Tires are XPRESS 36X @ $40 per set
21.5 Open Min 1 set Race Tires MAX 2 sets
13.5 Stock Min 1 set Race Tires MAX 2 sets
If you need practice sets put them with a P next to them.
http://docs.google.com/forms/d/e/1FA...3abzg/viewform
Last edited by StevenS; 12-20-2018 at 01:12 PM.
#2
How much are the entry fees
#3
#4
LISTINGS:-
Mini Kit :- Angus Young
Mini Mod:-
Knuth Stieler
James Mallise
Russell Mallise
Brendan Hollis
James Taylor
Greg Hooper
Tamiya Truck
Aaron Smith
Brendan Hollis
Steven Stubbin
Juniors 21.5 Tourer:-
21.5 Blinky Tourer:-
Aaron Smith
Steven Stubbin
Scott Jones
Jay Marcon
Nathan Beddoes
James Taylor
Greg Hooper
13.5 Tourer:-
James Mallise
Peter Becket
Duncan Vaughn
Michael Belby
Mini Kit :- Angus Young
Mini Mod:-
Knuth Stieler
James Mallise
Russell Mallise
Brendan Hollis
James Taylor
Greg Hooper
Tamiya Truck
Aaron Smith
Brendan Hollis
Steven Stubbin
Juniors 21.5 Tourer:-
21.5 Blinky Tourer:-
Aaron Smith
Steven Stubbin
Scott Jones
Jay Marcon
Nathan Beddoes
James Taylor
Greg Hooper
13.5 Tourer:-
James Mallise
Peter Becket
Duncan Vaughn
Michael Belby
Last edited by StevenS; 01-28-2019 at 12:24 PM.
#5
ok guys times a ticking lets get those entries in .
#6
Tamiya truck -
Kit only
exception of bearings and propeller shaft allowed
The problem with modifying what is supposed to be a kit class is you kill it straight up for newbies.
#7
Hey Steve, How come there is an extra truck class in the second series. There was no Mod truck in the first series, so how come there is now.? The rule set for the first one read:
Tamiya truck -
Kit only
exception of bearings and propeller shaft allowed
The problem with modifying what is supposed to be a kit class is you kill it straight up for newbies.
Tamiya truck -
Kit only
exception of bearings and propeller shaft allowed
The problem with modifying what is supposed to be a kit class is you kill it straight up for newbies.
#8
OK guys time is approaching fast get those entries in.
JUST REMEMBER TO BRING A TABLE AND CHAIR.
JUST REMEMBER TO BRING A TABLE AND CHAIR.
#9
Tech Rookie
Entries
Come on guys get them entries in ......
#10
How's the numbers looking guys.
#11
come on people get those entries in
#12
Tech Rookie
rules for the 21.5 open tourer and 13.5 tourer apart from what's on the nomination form is round 2 following the rcra rules
just asking have had a couple of enquires regarding which could lead to a few more entries in these classes
just asking have had a couple of enquires regarding which could lead to a few more entries in these classes
#13
Tech Rookie
Rules
21.5 is open motor roar approved
weve done this so that people can use existing motors they have .
all other rules are as per rcra .
weve done this so that people can use existing motors they have .
all other rules are as per rcra .
#14
Tech Rookie
tbh on the casino and tamworth tracks the sealed r1 21.5 motor is as quick as non sealed motors .
#15
Results from R2 Hobbywing Tri-Series are as follows
Trucks
TQ Aaron Smith
1st Brendan Hollis
2nd Aaron Smith
3rd Greg Hooper
Mini
TQ James Taylor
1st James Taylor
2nd James Mallise
3rd Knuth Steinler
21.5
TQ James Taylor
1st James Taylor
2nd Aaron Smith
3rd Steven Stubbin
13.5
TQ Peter Becket
1st Peter Becket
2nd James Mallise
3rd Michael Belby
I'd like to thank all the competitors for all their support for the 2nd round of the Hobbywing Tri-Series, i hope you all enjoyed the track layout.
Trucks
TQ Aaron Smith
1st Brendan Hollis
2nd Aaron Smith
3rd Greg Hooper
Mini
TQ James Taylor
1st James Taylor
2nd James Mallise
3rd Knuth Steinler
21.5
TQ James Taylor
1st James Taylor
2nd Aaron Smith
3rd Steven Stubbin
13.5
TQ Peter Becket
1st Peter Becket
2nd James Mallise
3rd Michael Belby
I'd like to thank all the competitors for all their support for the 2nd round of the Hobbywing Tri-Series, i hope you all enjoyed the track layout.