2018 XPRESS IMCC CUP 12-13-14th January IC&EP
#31
Tech Regular
Thread Starter
#32

Other than “same as last year” (which when you look it up it says “same as last year” - then again the year before - then I gave up looking) can someone point me in the direction for Mini?
Specifically, can we use the new esc/motor combo?
Also what 1/10 GT rules are we going by?
Specifically, can we use the new esc/motor combo?
Also what 1/10 GT rules are we going by?
#33
Tech Regular
Thread Starter

GT RULES
CHASSIS
1/10th scale 4WD touring chassis only. Chassis must have independent suspension on all four wheels. Each driven wheel must have a flexible joint - e.g. dog bones or universal joint drive shaft. Drive train and suspension design is free from restriction.
Flat Pan (1/12th and 1/10th Track Style) chassis are not allowed. The chassis must not be shaped to gain an aerodynamic advantage.
In principle the underside of the chassis must be flat and parallel to the ground along the entire length of the body-shell. Aerodynamic shaped parts (splitters/diffusers/tunnels/etc) may not be fitted to the chassis.
MOTOR
Manufacturer: Muchmore Racing
Model: Fleta ZX 17.5T Brushless motor Type-W Fixed Timing Version
Part Number: M-AARCMCC175WF
No modifications are allowed in any way at all. This includes any enhancements, improvements, tuning up, shimming, ceramic Bearings, timing and winding alterations. The motor must be run out of the box and tampering in any way is NOT ALLOWED! General cleaning of motor and lubing of original bearings is allowed.
GEARING
Minimum FDR 3.5.
ESC
Blinky specification as per AARCMCC rule Section 11 "NON-BOOSTED ELECTRONIC SPEED CONTROLLERS (ESCS) FOR SPEC CLASSES".
BODY SHELL
2 Door GT Style Bodies ONLY - 190mm.
TYRES
Xpress Pre-Glued Wheel Set 36X.
HOP-UPS
Any hop up available from any manufacturer.
BATTERIES
As per AARCMCC rule Section 12 "BATTERY SPECIFICATIONS".
WEIGHT
Minimum weight 1350 grams.
Regards IMCC.
CHASSIS
1/10th scale 4WD touring chassis only. Chassis must have independent suspension on all four wheels. Each driven wheel must have a flexible joint - e.g. dog bones or universal joint drive shaft. Drive train and suspension design is free from restriction.
Flat Pan (1/12th and 1/10th Track Style) chassis are not allowed. The chassis must not be shaped to gain an aerodynamic advantage.
In principle the underside of the chassis must be flat and parallel to the ground along the entire length of the body-shell. Aerodynamic shaped parts (splitters/diffusers/tunnels/etc) may not be fitted to the chassis.
MOTOR
Manufacturer: Muchmore Racing
Model: Fleta ZX 17.5T Brushless motor Type-W Fixed Timing Version
Part Number: M-AARCMCC175WF
No modifications are allowed in any way at all. This includes any enhancements, improvements, tuning up, shimming, ceramic Bearings, timing and winding alterations. The motor must be run out of the box and tampering in any way is NOT ALLOWED! General cleaning of motor and lubing of original bearings is allowed.
GEARING
Minimum FDR 3.5.
ESC
Blinky specification as per AARCMCC rule Section 11 "NON-BOOSTED ELECTRONIC SPEED CONTROLLERS (ESCS) FOR SPEC CLASSES".
BODY SHELL
2 Door GT Style Bodies ONLY - 190mm.
TYRES
Xpress Pre-Glued Wheel Set 36X.
HOP-UPS
Any hop up available from any manufacturer.
BATTERIES
As per AARCMCC rule Section 12 "BATTERY SPECIFICATIONS".
WEIGHT
Minimum weight 1350 grams.
Regards IMCC.
#34
Tech Regular
Thread Starter

Mini
Eligible Chassis
Tamiya M03, M05 or Mo7 series chassis only are permitted.
Wheels/Tyres
RIDE Mc38(Front) & Sc32(Rear)
Bodies
Bodyshells are open, with the following restrictions - No Modern (Post 1980) Touring Sedans and/or 12th scale type Wedge/Can-am Sports bodies.
NO WINGS PERMITTED
Motor & Transmission
20, 18 OR 16 Tooth pinions only
Tamiya Black Can Sport-Tuned motors – 53068 (23,000 rpm max), or 13T/3000KV Hobbywing OEM/rebranded COMPLETE SYSTEM (Hobbywing OEM motor and esc only) with max 25 or 35 or 65 amp ESC and engraved /etched can. No modifications are permitted to motors. Removal of fans is permitted on esc's.
**New Motor & Esc combo added**
HOBBYWING MAX 10 COMBO 3300Kv. EZRUN.
ESC - MAX 10 EZRUN 3652 SL - 30102602
MOTOR - 3652 SL 3300Kv - 30402600
Chassis/Modifications
Cars must be assembled as per Instruction Manual, and no chassis/powertrain modifications allowed. With the exception of the included/optional differential which may be modified to give a locked/spool action. Aftermarket differentials/spools are permitted. One-way diffs are specifically prohibited.
NO SPEED GEAR PERMITTIED
A minimum weight limit of 1330gms (with transponder) will apply. ESC, bearings and Tamiya Hot-ups only permitted, with the following exceptions – Official Tamiya optional ALLOY Hot-up components may be replaced with an equivalent aftermarket part. e.g. Front/Rear Uprights, Heatsink motor mount, servo mounts, shocks, steering bellcranks and linkages.
Protective bumpers are permitted providing they are of essentially foam construction with no hard mounting points contacting the body shell.
Aftermarket rear body mount support/braces are also permitted.
Batteries
Any approved 6 cell Nicad and/or NiMH stick pack. Any 2 cell, Hard-cased approved 7.4 Lipo packs as listed on the ROAR website (http://www.roarracing.com/approvals/lipobattery.php)
Regards IMCC
Eligible Chassis
Tamiya M03, M05 or Mo7 series chassis only are permitted.
Wheels/Tyres
RIDE Mc38(Front) & Sc32(Rear)
Bodies
Bodyshells are open, with the following restrictions - No Modern (Post 1980) Touring Sedans and/or 12th scale type Wedge/Can-am Sports bodies.
NO WINGS PERMITTED
Motor & Transmission
20, 18 OR 16 Tooth pinions only
Tamiya Black Can Sport-Tuned motors – 53068 (23,000 rpm max), or 13T/3000KV Hobbywing OEM/rebranded COMPLETE SYSTEM (Hobbywing OEM motor and esc only) with max 25 or 35 or 65 amp ESC and engraved /etched can. No modifications are permitted to motors. Removal of fans is permitted on esc's.
**New Motor & Esc combo added**
HOBBYWING MAX 10 COMBO 3300Kv. EZRUN.
ESC - MAX 10 EZRUN 3652 SL - 30102602
MOTOR - 3652 SL 3300Kv - 30402600
Chassis/Modifications
Cars must be assembled as per Instruction Manual, and no chassis/powertrain modifications allowed. With the exception of the included/optional differential which may be modified to give a locked/spool action. Aftermarket differentials/spools are permitted. One-way diffs are specifically prohibited.
NO SPEED GEAR PERMITTIED
A minimum weight limit of 1330gms (with transponder) will apply. ESC, bearings and Tamiya Hot-ups only permitted, with the following exceptions – Official Tamiya optional ALLOY Hot-up components may be replaced with an equivalent aftermarket part. e.g. Front/Rear Uprights, Heatsink motor mount, servo mounts, shocks, steering bellcranks and linkages.
Protective bumpers are permitted providing they are of essentially foam construction with no hard mounting points contacting the body shell.
Aftermarket rear body mount support/braces are also permitted.
Batteries
Any approved 6 cell Nicad and/or NiMH stick pack. Any 2 cell, Hard-cased approved 7.4 Lipo packs as listed on the ROAR website (http://www.roarracing.com/approvals/lipobattery.php)
Regards IMCC
Last edited by IMCC CUP; 11-22-2017 at 07:01 AM.
#35
Tech Regular
Thread Starter

**ENTRIES NOW OPEN**
FIRST PAGE OF THREAD
Regards IMCC.
#36
Tech Regular
Thread Starter

RACING THIS SUNDAY 26TH NOVEMBER
Hi all IMCC Race Day this Sunday.
Rego`s from 8.30am, Racing from 9.30am.
All Welcome!
*EVENT TYRES AVAILABLE AT TRACK SOON*
Regards IMCC.
#39
Tech Regular
Thread Starter
#40
Tech Regular
Thread Starter
#42

Can someone advise on availability of the Xpress tyre for GT, specifically where it can be purchased prior? We've been running GT cars on Much More tyres here.
#43

They will also be available for purchase from the IMCC club as of this Sunday.
#44

Is this site in Australia? Don't think I've heard of them before.
#45

Yes it is. We are based in Sydney.