1/8 Brushless Motor / Savox Servo / 2.2 Crawler Wheels
09-19-2016, 04:41 PM
#3
Tech Rookie
Motor and servo
Pm sent
Last edited by Hollywood351; 09-19-2016 at 05:00 PM.
09-26-2016, 07:45 AM
#5
Pm sent
.
09-26-2016, 05:19 PM
#6
nil for servo if not sold
09-28-2016, 04:32 AM
#7
Motor still available?
10-04-2016, 06:43 AM
#8
Guys really sorry for the late responses. I'll update OP, but Motor has sold.
Irok 2.2's are still available.
The servo is on it's way back to me.
Someone on a facebook group purchased the servo. I haven't done any racing in over a year (I've kind of moved into multirotors and heli's). I checked the servo before I shipped it with a servo tester (it's basically just a little device with a dial you turn to check servos). It checked out fine. I shipped it to buyer, buyer sent me a video saying it's dead.
I refunded the buyer and it should be on its way back to me now. I don't want to test it with a servo tester and find it works and then on sell it again only to find someone else has issues. I'll be putting it back in my buggy and testing it in the vehicle this time.
Like I said, it was tested with a servo tester (powered off of a 1S lipo just for test purposes) but this time I want to put it in a vehicle to ascertain whether this was an issue with the servo or something else to do with the install at the other end.
I don't like sending something I expect to work, not work when someone gets it, so to be sure there are no doubts that it works fine I want to test it under the conditions it will be used. It worked fine the last time I used it, it worked fine on my servo tester, so why it wasn't working for the person who bought it is something I need to determine.
I'll update those who PM'd me if they are still chasing the servo when I get it back and can safely say it works.
Cheers
Damien
Irok 2.2's are still available.
The servo is on it's way back to me.
Someone on a facebook group purchased the servo. I haven't done any racing in over a year (I've kind of moved into multirotors and heli's). I checked the servo before I shipped it with a servo tester (it's basically just a little device with a dial you turn to check servos). It checked out fine. I shipped it to buyer, buyer sent me a video saying it's dead.
I refunded the buyer and it should be on its way back to me now. I don't want to test it with a servo tester and find it works and then on sell it again only to find someone else has issues. I'll be putting it back in my buggy and testing it in the vehicle this time.
Like I said, it was tested with a servo tester (powered off of a 1S lipo just for test purposes) but this time I want to put it in a vehicle to ascertain whether this was an issue with the servo or something else to do with the install at the other end.
I don't like sending something I expect to work, not work when someone gets it, so to be sure there are no doubts that it works fine I want to test it under the conditions it will be used. It worked fine the last time I used it, it worked fine on my servo tester, so why it wasn't working for the person who bought it is something I need to determine.
I'll update those who PM'd me if they are still chasing the servo when I get it back and can safely say it works.
Cheers
Damien
10-06-2016, 12:12 AM
#11
Got the motor today haven't tested it out but seems good and as described. Cheers mate. 😉
10-06-2016, 12:40 AM
#12
No problems mate, let me know how it goes
I have received the servo back today. Tested it with a servo tester and it worked fine. Just to eliminate it wasn't some voltage thing and because I wanted to test it under the conditions it would be used under, I threw it into my buggy (which uses the same servo) and tested it in there as well. Works fine. Not sure what issue the previous buyer had with the servo, the buyer did send me a video and yeh in the video, it just didn't do anything, no power up at all. So I'm at a loss as to explaining why they had issues, I can only think it was something in the servo protocol selection on the radio that was an issue (I believe they were using a Sanwa MT4, but could be mistaken now).
Anyway here is the video I took testing it.
https://youtu.be/5MiSMSTsk18
So I can't see any issue myself so it's again up for sale
Please PM me if interested
Cheers
10-09-2016, 12:54 AM
#13
Motor tested as all good. Thanks a lot mate.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
