Team associated T4.2 Factory team
#1
Team associated T4.2 Factory team
Team Associated T4.2 Factory Team stadium truck.
I bought this intending to do some indoor racing but am thinking I won't have the time, so looking to let it go. Not in any hurry to sell it so not interested in lowballers.
I have run the car literally twice to test out electronics and haven't raced it yet. Previous owner had hardly used it either and it shows, there is not a lot of wear on the chassis at all.
It has been upgraded with a few extra bits:
Avid motor centering plate and idler shaft
STRC aluminium rear chassis brace
RPM ball cups all round
Otherwise pretty stock. Being a factory team kit it comes with the goodies like:
Factory Team 12mm Big Bore hard-anodized aluminum threaded shocks with TiN "Gold" 3mm shock shafts
VTS slipper (variable torque, multi-plate slipper with three drive surfaces) assembly featuring a high-resolution spring
Factory Team 12mm blue aluminum front and rear clamping hexes with hex wheels
Pro-Line Bulldog body
Factory Team 7075-T6 blue aluminum 0 deg. rear hubs with oversized outer bearing
Factory Team blue aluminum bellcrank set
Updated shock towers optimized for the 12mm Big Bore shocks
Ball differential with light-weight outdrives
Factory Team blue titanium turnbuckles
Factory Team carbon-fiber battery strap and blue aluminum thumb screws
CVA joints with pin retainer clips
(taken from the AE website)
Will come with original box, including manual, sticker sheet, extra parts such as shock pistons, original idler shaft plus some other bits and pieces.
Willing to sell as a roller or as almost ready to run.
Roller will include no electronics or tyres, both can be purchased separately.
For roller only $200 plus post
As Almost RTR car would include Speed Passion Reventon R ESC (which has seen very little use in a touring car, and comes with program card), Yeah Racing Hackmoto EVO 17.5T (hardly used also on touring car), Radiopost Red servo (servo is a couple of years old but seems to be working ok; the aluminium servo horn pictured is not included) - an extra $80 on top of the roller cost
ARTR $280 plus post
Tyres -
1 pair - Proline HoleShot M3 brand new, mounted on white rims $20
1 Pair - Proline Caliber M3 used 75% tread left, mounted on white rims $15
2 pairs - Panther Burner Slick used, (no idea how much use) mounted on yellow rims $30
Rims -
1 pair brand new white rims
2 pairs yellow rims used - currently have Jconcepts tyres on them (Double Dees rear and Carvers front, both sets are quite worn) rims are in good condition
$10 all 3 pairs
Take the lot $60 plus post
So a recap of prices
Roller: $200 +post
Roller & Tyres: $250 +post
ARTR (no tyres): $280 +post
The Lot: $320 +post
Cash on pickup or Paypal if posting
I bought this intending to do some indoor racing but am thinking I won't have the time, so looking to let it go. Not in any hurry to sell it so not interested in lowballers.
I have run the car literally twice to test out electronics and haven't raced it yet. Previous owner had hardly used it either and it shows, there is not a lot of wear on the chassis at all.
It has been upgraded with a few extra bits:
Avid motor centering plate and idler shaft
STRC aluminium rear chassis brace
RPM ball cups all round
Otherwise pretty stock. Being a factory team kit it comes with the goodies like:
Factory Team 12mm Big Bore hard-anodized aluminum threaded shocks with TiN "Gold" 3mm shock shafts
VTS slipper (variable torque, multi-plate slipper with three drive surfaces) assembly featuring a high-resolution spring
Factory Team 12mm blue aluminum front and rear clamping hexes with hex wheels
Pro-Line Bulldog body
Factory Team 7075-T6 blue aluminum 0 deg. rear hubs with oversized outer bearing
Factory Team blue aluminum bellcrank set
Updated shock towers optimized for the 12mm Big Bore shocks
Ball differential with light-weight outdrives
Factory Team blue titanium turnbuckles
Factory Team carbon-fiber battery strap and blue aluminum thumb screws
CVA joints with pin retainer clips
(taken from the AE website)
Will come with original box, including manual, sticker sheet, extra parts such as shock pistons, original idler shaft plus some other bits and pieces.
Willing to sell as a roller or as almost ready to run.
Roller will include no electronics or tyres, both can be purchased separately.
For roller only $200 plus post
As Almost RTR car would include Speed Passion Reventon R ESC (which has seen very little use in a touring car, and comes with program card), Yeah Racing Hackmoto EVO 17.5T (hardly used also on touring car), Radiopost Red servo (servo is a couple of years old but seems to be working ok; the aluminium servo horn pictured is not included) - an extra $80 on top of the roller cost
ARTR $280 plus post
Tyres -
1 pair - Proline HoleShot M3 brand new, mounted on white rims $20
1 Pair - Proline Caliber M3 used 75% tread left, mounted on white rims $15
2 pairs - Panther Burner Slick used, (no idea how much use) mounted on yellow rims $30
Rims -
1 pair brand new white rims
2 pairs yellow rims used - currently have Jconcepts tyres on them (Double Dees rear and Carvers front, both sets are quite worn) rims are in good condition
$10 all 3 pairs
Take the lot $60 plus post
So a recap of prices
Roller: $200 +post
Roller & Tyres: $250 +post
ARTR (no tyres): $280 +post
The Lot: $320 +post
Cash on pickup or Paypal if posting