Kyosho MP9 TKI + heaps of extras
11-03-2015, 04:48 AM
#1
Kyosho MP9 TKI + heaps of extras
Up for sale is all my Kyosho MP9 stuff. There is 1 complete and assembled car, a second almost complete car (unassembled), some new in packet parts and some spare used parts.
The complete car:
This is a MP9 TKI1 (original TKI) which has had a few upgraded parts added to it.
It features all the Hard anodized parts front and rear shock towers (front tower is brand new and never used, has been fitted for this rebuild), chassis, all turnbuckles, all ball ends etc.
This model has the velvet coated (clip adjustable) shocks, with the long shocks on the rear. I never bothered to change to the screw adjustable shocks as they didn't come with the velvet coat, which is silky smooth and very hard wearing compared to the standard anodizing. The clip adjustment was never a problem.
This car is also fitted with the TKI2 radio tray, which features a carbon fibre plate for forward receiver pack mounting (car will come with a Li-Po receiver pack, as it does not fit in my current car); it also is fitted with the alloy rear toe plate, alloy upper servo saver arm and a one piece engine mount (M2C or King Headz not sure which).
It has the long King pins fitted, as well as 93mm universals in the front. The rear is fitted with the Hard plastic zero offset hub carriers
Car has just been fully torn down and rebuilt with brand new bearings throughout, brand new front and rear lower arms and new oils in the diffs (5000 front, 5000 centre and 3000 rear).
The shocks are unassembled, but are fully cleaned and ready to put back together. They come with 1.3mm x 8 Hole pistons (white) or the option of 1.2mm x 8 hole (black), and come with light blue springs.
The chassis does have wear on it, as can be seen on the photos, but is still good to use.
The second car:
The second car is also a TKI1 with all the hard anodized parts, but does not have the extra alloy upgrades it is stock. The car is completely unassembled but almost complete. It would require centre driveshafts, hex hubs, and a bearing set to complete it. The chassis does have more wear on it than the other car. The car can be used as spares or built into a second car.
There is also a bunch of extra parts in the box with it, such as a few sets of used arms (front and rear), extra sets of front and rear hub carriers (plastic), shock clips, wings etc.
New Parts:
1 set of front arms, 1 set of rear arms
Assorted suspension pills
Fiorini Alloy chassis brace (front is new and unused, rear is used)
Plastic servo horns
assorted plastic pieces
The plastic tray is included in the sale.
There's a few extra bits an pices as well such as extra sway bars of varying size, 1 or 2 extra front/rear diffs, some extra front/rear universals etc.
Car will come with a couple of used bodies not pictured.
There's plenty of stuff there. Car is easily upgradeable to tki3 specs as well, as all the newer parts fit straight on.
See photo's and feel free to ask any questions.
Payment is via paypal if I'm posting, or cash if picking it up.
***Sold pending payment***
The complete car:
This is a MP9 TKI1 (original TKI) which has had a few upgraded parts added to it.
It features all the Hard anodized parts front and rear shock towers (front tower is brand new and never used, has been fitted for this rebuild), chassis, all turnbuckles, all ball ends etc.
This model has the velvet coated (clip adjustable) shocks, with the long shocks on the rear. I never bothered to change to the screw adjustable shocks as they didn't come with the velvet coat, which is silky smooth and very hard wearing compared to the standard anodizing. The clip adjustment was never a problem.
This car is also fitted with the TKI2 radio tray, which features a carbon fibre plate for forward receiver pack mounting (car will come with a Li-Po receiver pack, as it does not fit in my current car); it also is fitted with the alloy rear toe plate, alloy upper servo saver arm and a one piece engine mount (M2C or King Headz not sure which).
It has the long King pins fitted, as well as 93mm universals in the front. The rear is fitted with the Hard plastic zero offset hub carriers
Car has just been fully torn down and rebuilt with brand new bearings throughout, brand new front and rear lower arms and new oils in the diffs (5000 front, 5000 centre and 3000 rear).
The shocks are unassembled, but are fully cleaned and ready to put back together. They come with 1.3mm x 8 Hole pistons (white) or the option of 1.2mm x 8 hole (black), and come with light blue springs.
The chassis does have wear on it, as can be seen on the photos, but is still good to use.
The second car:
The second car is also a TKI1 with all the hard anodized parts, but does not have the extra alloy upgrades it is stock. The car is completely unassembled but almost complete. It would require centre driveshafts, hex hubs, and a bearing set to complete it. The chassis does have more wear on it than the other car. The car can be used as spares or built into a second car.
There is also a bunch of extra parts in the box with it, such as a few sets of used arms (front and rear), extra sets of front and rear hub carriers (plastic), shock clips, wings etc.
New Parts:
1 set of front arms, 1 set of rear arms
Assorted suspension pills
Fiorini Alloy chassis brace (front is new and unused, rear is used)
Plastic servo horns
assorted plastic pieces
The plastic tray is included in the sale.
There's a few extra bits an pices as well such as extra sway bars of varying size, 1 or 2 extra front/rear diffs, some extra front/rear universals etc.
Car will come with a couple of used bodies not pictured.
There's plenty of stuff there. Car is easily upgradeable to tki3 specs as well, as all the newer parts fit straight on.
See photo's and feel free to ask any questions.
Payment is via paypal if I'm posting, or cash if picking it up.
***Sold pending payment***
Last edited by schmarkoDave; 11-09-2015 at 01:41 AM. Reason: sold pending
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
