TEAM ASSOCIATED RC8.2 'RYAN MAIFIELD SPEC' + SPARES + PARTS LOT
11-27-2012, 06:45 PM
#1
TEAM ASSOCIATED RC8.2 'RYAN MAIFIELD SPEC' + SPARES + PARTS LOT
##PRICE DROP##. AGAIN!!! And again..... Last time...
FINAL PRICE DROP FOR THE COMPLETE PACKAGE
$395 FOR ABSOLUTELY EVERYTHING (local pickup available or can be shipped at buyers cost).
1. TEAM ASSOCIATED RC8.2 'RYAN MAIFIELD SPEC' RACE ROLLER + SPARES
This buggy has been heavily modified to match the upgrades that are currently being used by the AE FT members. It is approximately 9 months old and has seen rather minimal use. I take incredible care in my rides and make sure they receive the full service treatment after every race. I have spent over $700 (not including painted bodies) in upgrades to the box spec. It is a very quick car and handles incredibly well. Here is a list of the upgrades:
-GHEA LRC C & D blocks
-GHEA CVD drivepin retainers (rear needs to be installed)
-AE FT Alum Rear Hubs (3rd hole option)
-AE FT front and rear carbon shock towers (drilled '0' hole in the rear tower)
-AE FT vertical steering setup (caster blocks, spindles, bushings)
-Kyosho light blue & orange shock spring sets
-King Headz quick change engine mount (plus 2 engine plates)
-Upgrade Vortex wing
-RC8 wing mount (high)
-Titanium shock pins (Avid)
-M2C racing shock pistons (8x1.3)
-M2C racing front shock tower bra
-Aluminium servo arms (Racers edge)
In addition to these upgrades you will also receive a bunch of extras:
-1 jconcepts finisher body (BNIP)
-1 jconcepts finisher body - painted by CustomRCGraphics
-1 jconcepts punisher body - painted by savagesam
-2 x air filter setups
-all original stock RC8.2 parts
PRICE: $450.00 + post at buyers expense (local pickup available - bayside Melbourne)
2. MASSIVE AE RC8/8.2 PARTS LOTS
I have accumulated a significant amount of spares. As shown in the below pictures some are BNIP and others are from a donor RC8RS (95% complete). The parts BNIP (all compatible with the 8.2) are:
-linkage set
-diff gasket
-3 x FR/RR gearbox set
-centre driveshaft +3mm
-Diff o-rings
-front arms
-rear arms
-front/rear dog bones
-diff housing
-diff shims
-wing mounts
-lucky 7 pre-oiled air filters
Not BNIP
-1 upgrade vortex wing
-1 RC8.2 wing and mount
-AE air filters
-2 x fuel tanks
-RC8.2 front an rear shock towers
PLUS all the other gear from the RC8RS (mostly compatible with the 8.2).
PRICE: $150 + postage at buyers expense (or local pickup from bayside Melbourne)
If anyone is interested in the lot we can work out a price via PM.
FINAL PRICE DROP FOR THE COMPLETE PACKAGE
$395 FOR ABSOLUTELY EVERYTHING (local pickup available or can be shipped at buyers cost).
1. TEAM ASSOCIATED RC8.2 'RYAN MAIFIELD SPEC' RACE ROLLER + SPARES
This buggy has been heavily modified to match the upgrades that are currently being used by the AE FT members. It is approximately 9 months old and has seen rather minimal use. I take incredible care in my rides and make sure they receive the full service treatment after every race. I have spent over $700 (not including painted bodies) in upgrades to the box spec. It is a very quick car and handles incredibly well. Here is a list of the upgrades:
-GHEA LRC C & D blocks
-GHEA CVD drivepin retainers (rear needs to be installed)
-AE FT Alum Rear Hubs (3rd hole option)
-AE FT front and rear carbon shock towers (drilled '0' hole in the rear tower)
-AE FT vertical steering setup (caster blocks, spindles, bushings)
-Kyosho light blue & orange shock spring sets
-King Headz quick change engine mount (plus 2 engine plates)
-Upgrade Vortex wing
-RC8 wing mount (high)
-Titanium shock pins (Avid)
-M2C racing shock pistons (8x1.3)
-M2C racing front shock tower bra
-Aluminium servo arms (Racers edge)
In addition to these upgrades you will also receive a bunch of extras:
-1 jconcepts finisher body (BNIP)
-1 jconcepts finisher body - painted by CustomRCGraphics
-1 jconcepts punisher body - painted by savagesam
-2 x air filter setups
-all original stock RC8.2 parts
PRICE: $450.00 + post at buyers expense (local pickup available - bayside Melbourne)
2. MASSIVE AE RC8/8.2 PARTS LOTS
I have accumulated a significant amount of spares. As shown in the below pictures some are BNIP and others are from a donor RC8RS (95% complete). The parts BNIP (all compatible with the 8.2) are:
-linkage set
-diff gasket
-3 x FR/RR gearbox set
-centre driveshaft +3mm
-Diff o-rings
-front arms
-rear arms
-front/rear dog bones
-diff housing
-diff shims
-wing mounts
-lucky 7 pre-oiled air filters
Not BNIP
-1 upgrade vortex wing
-1 RC8.2 wing and mount
-AE air filters
-2 x fuel tanks
-RC8.2 front an rear shock towers
PLUS all the other gear from the RC8RS (mostly compatible with the 8.2).
PRICE: $150 + postage at buyers expense (or local pickup from bayside Melbourne)
If anyone is interested in the lot we can work out a price via PM.
Last edited by prowlag; 12-18-2012 at 07:30 PM.
11-28-2012, 02:16 AM
#2
Honest seller and well maintained kit
12-10-2012, 02:14 PM
#13
Rc8.2 package !
Wow too cheap !
12-13-2012, 02:24 AM
#15
