NIB Dragonus II 450 Helicopters
#1
NIB Dragonus II 450 Helicopters
I'm selling up my 3 Dragonus Helicopters, dont need them any more as i dont really fly much.
Up for sale is:
2x NIB 100% Built Helicopters. I'm asking $290 for them plus postage.
Details:
Dragonus II Plus 100% Built
This Kit features:
* Dragonus II Plus Model 100% built
* 4x10g Servos installed
* Rcer 500XH brushless motor
* Pro Tronik 30 amp Brushless ESC
Needed to Complete:
* 6 Channel Radio with 120deg CCPM mixing
* 6 Channel receiver
* Gyro
* Battery 20C 11.1v Lipo 2000+mah reccomended
* Lipo Battery Charger
450-class helicopter with CCPM (collective cyclic pitch mixing) for precise control.
Kit has a rigid and lightweight aluminum frame with assembly nuts pre-attached (N version).
This makes the step-by-step assembly much quicker and easier.
All small parts are packaged in separate numbered and lettered bags and the manual has exploded view drawings showing every part.
The rotor head is "Programmable"; you can mechanically set it to one of three different settings. The mildest setting is good for initial set-up and general flying; on the most sensitive setting the control is instantaneous, great for radical 3D flying. The fit and finish of the parts is excellent with no slop in any of the control linkages.
The blades are wood covered in clear heat shrink film. The canopy is white plastic, colorful decals are included. Flight time 8-10 minutes.
Frame Material Aluminium
Vertical stabilizer Fin Moulded Plastic
Horizontal stabilizer Fin Moulded Plastic
Main Blades 325mm wood with carbon
Tail blades Moulded Plastic
Paddles Moulded Plastic
Head Plastic
Tail Case Moulded Plastic
Tail Pitch Slider Moulded Plastic
Boom supports Carbon rod plastic
Canopy Plastic
Printed Manual Included
Main rotor diameter: 723mm
Tail rotor diameter: 146mm
Length: 660mm
Width: 100mm
Weight: 392g
Main Gear: 150tooth
Tail belt drive gear: 51tooth
Gear Ratio: 1:11.5:4.6/1:10.7:4.6/1:10:4.
And i have my 2nd hand Dragonus i'm asking $50 for it plus postage, The frame is bent slightly but doesn't effect flying at all. Doesn't Come with electronics but can supply Servos, Gyro, battery, speedy and motor for an extra $70
I also have 1x NIB Dragonus kit (not assembled) for $120 plus postage. This is just the kit, no electronics.
If you have any questions or want more pics just PM me and ill email them to you.
Cheers.
Tom
Up for sale is:
2x NIB 100% Built Helicopters. I'm asking $290 for them plus postage.
Details:
Dragonus II Plus 100% Built
This Kit features:
* Dragonus II Plus Model 100% built
* 4x10g Servos installed
* Rcer 500XH brushless motor
* Pro Tronik 30 amp Brushless ESC
Needed to Complete:
* 6 Channel Radio with 120deg CCPM mixing
* 6 Channel receiver
* Gyro
* Battery 20C 11.1v Lipo 2000+mah reccomended
* Lipo Battery Charger
450-class helicopter with CCPM (collective cyclic pitch mixing) for precise control.
Kit has a rigid and lightweight aluminum frame with assembly nuts pre-attached (N version).
This makes the step-by-step assembly much quicker and easier.
All small parts are packaged in separate numbered and lettered bags and the manual has exploded view drawings showing every part.
The rotor head is "Programmable"; you can mechanically set it to one of three different settings. The mildest setting is good for initial set-up and general flying; on the most sensitive setting the control is instantaneous, great for radical 3D flying. The fit and finish of the parts is excellent with no slop in any of the control linkages.
The blades are wood covered in clear heat shrink film. The canopy is white plastic, colorful decals are included. Flight time 8-10 minutes.
Frame Material Aluminium
Vertical stabilizer Fin Moulded Plastic
Horizontal stabilizer Fin Moulded Plastic
Main Blades 325mm wood with carbon
Tail blades Moulded Plastic
Paddles Moulded Plastic
Head Plastic
Tail Case Moulded Plastic
Tail Pitch Slider Moulded Plastic
Boom supports Carbon rod plastic
Canopy Plastic
Printed Manual Included
Main rotor diameter: 723mm
Tail rotor diameter: 146mm
Length: 660mm
Width: 100mm
Weight: 392g
Main Gear: 150tooth
Tail belt drive gear: 51tooth
Gear Ratio: 1:11.5:4.6/1:10.7:4.6/1:10:4.
And i have my 2nd hand Dragonus i'm asking $50 for it plus postage, The frame is bent slightly but doesn't effect flying at all. Doesn't Come with electronics but can supply Servos, Gyro, battery, speedy and motor for an extra $70
I also have 1x NIB Dragonus kit (not assembled) for $120 plus postage. This is just the kit, no electronics.
If you have any questions or want more pics just PM me and ill email them to you.
Cheers.
Tom