WTT Evader EXT Roller with ALL SPARES for On Road (TT01)
02-20-2008, 09:18 PM
#1
WTT Evader EXT Roller with ALL SPARES for On Road (TT01)
Duratrax Evader EXT fully upgraded with ST Front arms, full bearings, ST Alloy shocks Front and Rear, front tyres are original near new, rear tyres are Proline Gladiators on Duratrax Rims (Cost $50) Body is serviceable but has some “dog bite marks” (Shell was off body in my workshop and the dog decided to play)
The EXT runs the more reliable gear diff, as opposed to the ST which continually failed.. The transmission has been fully stripped down and rebuilt with Molybond grease the roller comes in it’s original box
(Parts prices from rchobbies.com.au)
Also included are the following spares (used or not in packet).
Duratrax ST Adjustable Tie Rods and Ball Cups (Full Set for Car) $20
DTXC8269 – Motor Plate $7
DTXC8220 Front Knuckle Arms (Pair) $5
DTXC9665 Top Shaft with Bearings $13
DTXC8031 Front Hub Carrier $5
DTXC8790 Servo Brace $5
Complete set of Soft Springs $18
DTXC6809 Front Bulk Head $10
DTXC 8884 Servo Saver Shaft Set $11
DTXC 8892 Servo Saver Set $8
DTXC9314 Slipper clutch Hub set $16
DTXC9460 Steering Servo Mounts $4
DTXC9380 Slipper Spring $4
DTXC8028 Hinge Pin Set $8
DTXC8199 King Pin Set $8
DTXC6290 Battery Strap $7
DTXC9255 Rear Shock Tower $6
DTXC9553 Rear Suspension Arm Set $8
DTXC8265 Motor Guard $7
DTXC9667 Transmission Brace $8
DTXC9254 Shock Tower Front $6
Nitro Evader Idler Gear $40 (Ideal if you want to beef things up)
Original EXT Plastic Shocks (one damaged)
And the following NEW IN PACKET Spares
DTXC 9552 Evader ST Front Arms * 2 packs
DTXC 89544 Evader EXT Front Arms * 1 Pack
DTXC 6979 Evader Chassis * 1 Pack
DTXC 8031 Front Hub Carrier * 1 Pack
DTXC 6809 Front Bulkhead * 1 Pack
DTXC 9056 Shock Seal Set * 1 Pack
DTXC 6179 Rear Axles and Pins * 1 Pack
DTXC 9403 Spur Gear * 1 Pack
DTXC 6611 Front Chassis Brace * 1 Back
DTXC 7337 Diff Joint Spring * 1 Pack
DTXC 7340 Gear Case * 1 Pack
DTXC 9385 Spring Pins * 1 Pack
DTXC 9387 Spring Pins * 1 Pack
DTXC 86172 Front Axles * 1 Pack
DTXC 8213 Front Knuckle Arms * 1 Pack
Wanting to trade this lot for a reasonable onroad chassis, pref a TT-01 or similar with bearings, decent shell and alloy shaft, or consider TA05 or TA04. Will sell as a lot for $150 + post (firm) which is not even covering the value of the spares!
The EXT runs the more reliable gear diff, as opposed to the ST which continually failed.. The transmission has been fully stripped down and rebuilt with Molybond grease the roller comes in it’s original box
(Parts prices from rchobbies.com.au)
Also included are the following spares (used or not in packet).
Duratrax ST Adjustable Tie Rods and Ball Cups (Full Set for Car) $20
DTXC8269 – Motor Plate $7
DTXC8220 Front Knuckle Arms (Pair) $5
DTXC9665 Top Shaft with Bearings $13
DTXC8031 Front Hub Carrier $5
DTXC8790 Servo Brace $5
Complete set of Soft Springs $18
DTXC6809 Front Bulk Head $10
DTXC 8884 Servo Saver Shaft Set $11
DTXC 8892 Servo Saver Set $8
DTXC9314 Slipper clutch Hub set $16
DTXC9460 Steering Servo Mounts $4
DTXC9380 Slipper Spring $4
DTXC8028 Hinge Pin Set $8
DTXC8199 King Pin Set $8
DTXC6290 Battery Strap $7
DTXC9255 Rear Shock Tower $6
DTXC9553 Rear Suspension Arm Set $8
DTXC8265 Motor Guard $7
DTXC9667 Transmission Brace $8
DTXC9254 Shock Tower Front $6
Nitro Evader Idler Gear $40 (Ideal if you want to beef things up)
Original EXT Plastic Shocks (one damaged)
And the following NEW IN PACKET Spares
DTXC 9552 Evader ST Front Arms * 2 packs
DTXC 89544 Evader EXT Front Arms * 1 Pack
DTXC 6979 Evader Chassis * 1 Pack
DTXC 8031 Front Hub Carrier * 1 Pack
DTXC 6809 Front Bulkhead * 1 Pack
DTXC 9056 Shock Seal Set * 1 Pack
DTXC 6179 Rear Axles and Pins * 1 Pack
DTXC 9403 Spur Gear * 1 Pack
DTXC 6611 Front Chassis Brace * 1 Back
DTXC 7337 Diff Joint Spring * 1 Pack
DTXC 7340 Gear Case * 1 Pack
DTXC 9385 Spring Pins * 1 Pack
DTXC 9387 Spring Pins * 1 Pack
DTXC 86172 Front Axles * 1 Pack
DTXC 8213 Front Knuckle Arms * 1 Pack
Wanting to trade this lot for a reasonable onroad chassis, pref a TT-01 or similar with bearings, decent shell and alloy shaft, or consider TA05 or TA04. Will sell as a lot for $150 + post (firm) which is not even covering the value of the spares!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
