5625 Digital Servo
 

I purchased a 5625 MG digital servo about 6 months ago. I no longer have the receipt. I was wondering if hitec will still cover this under warranty. I originally purchased two, one is still working, and it shorted out after being used twice. I replaced it with another brand but now I need another servo. Any info would be great.

drop an email to: [email protected]

burned up
 

I was at the Texas Biggie and burned up 2 servos from HITEC, The sweeper was a 50 mph. turn , one servo smoked and burned the case the other just stoped working.

I also had one that I ran only 1 time and the servo stop working and the case was also melted, not burn totally melted.

Did you guys have the EPA's set on them?

EPA
 

Yes the end point adjustments were set on mine, like I said the track where they blew up was high bite and had a 50 mph. sweeper!
There where other people who blew servos also, one guy in the A 1/8 final had to steer his car straight, because the servo lost its abillity to center!

Yes, The servo was on the throttle for my MTX-3 and the EPA were set at 37% throttle and 50% for brake.

My dad has one of these....

1st one gliched like mad no-matter what equipment we used it with...We returned it and the second did the exact same

Somethings wrong with these things...

http://www.hitecrcd.com/Support/servostatement.htm

This may explain some of ythe issues you have seen.

:confused:

The problem is my dad has a Hitec Radio & hes had it reset by the servo guy at the LHS....

I'll check to see what date it has on it...

I'd like to thank Hitec for the quick response and handling of my problem.

Sent in my servo with a brief description of the problem, received confirmation of receipt of my servo, and in 5 business days my problem was resolved. A brand new servo shipped UPS to me!!!

I can't speak for other people but customer service is always a plus in any product, and Hitec was very efficient in my situation.

Thanks again, Hitec, Tres, and the service dept. :nod: :nod: