HobbyTown Tucson AZ
#451
I’m seriously thinking of driving down for some racing next weekend but have a few questions that most likely have been answered before in previous threads. Anyhoot let me ask anyways.
What time do you start and end up?
I have a Custom works Sprint car with a 4600 in it; do you have a class for them? I can put a 13.5 in if need be.
What tires work and any special set-ups needed?
Thanks
What time do you start and end up?
I have a Custom works Sprint car with a 4600 in it; do you have a class for them? I can put a 13.5 in if need be.
What tires work and any special set-ups needed?
Thanks
What shock oil wt is good for sc racing ?
#452
Tech Adept
Oil
35 in front and 30 in rear I run mine stiff at 45 front and 40 rear depend how you like your set up hope it helps
#453
Thanks, are you using team associated or Losi? I don't know what I prefer...pretty new to rc so I had been running with the stock oil but it leaked out in the rear.
#454
They are both good. Just pick one and stick with it and you won't have any problems.
#456
Yea I guess the kyosho plastic shocks are notorious for leaking. Awhile back I bought the replacement plastic shock part because I just needed the cup to hold the spring in. With the plastic shocks the o-rings come pre set in the shock bodies. I can't find online how to get the o-rings and little cartridge out of the shock body. I might just use the new shock bodies and if they leak then rebuild.
#457
Tech Prophet
iTrader: (84)
Yea I guess the kyosho plastic shocks are notorious for leaking. Awhile back I bought the replacement plastic shock part because I just needed the cup to hold the spring in. With the plastic shocks the o-rings come pre set in the shock bodies. I can't find online how to get the o-rings and little cartridge out of the shock body. I might just use the new shock bodies and if they leak then rebuild.
#458
Red is a good person to ask about Kyosho stuff.... They guy smashing his truck into the wall Saturday, lol. But it can get pretty pricey updating that truck. I would fix thing that broke, but not really upgrade things. Anything aluminum will cost a ton and shocks can be very pricey unless you can find a set of used velvets in good shape. Ask around the Kyosho sct thread about ways to bullet proof those shocks. If you end up buying new shocks, you might as well sell that truck and buy a different one. new shocks can easily for over $100 for alum shocks.
And stock slash ultra shocks with aluminum caps are another alternative. I can get a whole set for $17 shipped and the caps aren't too much.
Last edited by Rc-007; 02-25-2014 at 12:17 PM.
#459
Tech Prophet
iTrader: (84)
lol...was that truck a kyosho? so far I've read about 140 out of 160 pages(over the last few days) in the Ultima sc thread and it looks like using grooved o-rings and green slime is the best way to keep the stock shocks from leaking. And stock slash ultra shocks with aluminum caps are another alternative. I can get a whole set for $17 shipped and the caps aren't too much.
Here is the part number for the traxxas 3mm x-rings. you would need 2 sets of these for front and rear. you can ask in the kyosho thread if they work. I "think" they are 3mm, but not 100% sure.
http://www.amain.com/product_info.ph...ck-Rebuild-Kit
#460
Since W3 is not running SC4x4 this weekend, I am planning on the journey down to Tucson “weather permitted” but I really want to run oval. Is there a good 1:10 scale sprint car class on Saturdays and what are the class rules??
#462
#464
Last week there were about 10 classes and at 10:00/10:30 they had just finished the qualifiers. I left due to my DNF, but they probably went until midnight or so. I want to race tonight, but that depends on how fast usps gets me my parts ;p