Go Back  R/C Tech Forums > General Forums > 3D Printing Forum
3D printed FORD MUSTANG 1:10 >

3D printed FORD MUSTANG 1:10

Like Tree6Likes
  • 5 Post By antibala
  • 1 Post By antibala

3D printed FORD MUSTANG 1:10

Old 08-01-2020, 11:45 AM
  #1  
Tech Initiate
Thread Starter
 
Join Date: Aug 2019
Location: Budapest
Posts: 34
Default 3D printed FORD MUSTANG 1:10

My brother and I stared to build a classic american muscle The ford Mustang 1967
Whenever we think this project is finished we will share the printable 3D body of the car on thingiverse.
Hope you will enjoy this journey with us


antibala is offline  
Old 08-02-2020, 02:25 PM
  #2  
Tech Initiate
Thread Starter
 
Join Date: Aug 2019
Location: Budapest
Posts: 34
Default


The chassis is built on a 2 (aluminium) U profile (8x10 mm) with bought and 3D printed parts.
Bought parts are: The suspension (length 60 mm), the wheel rims with the tires, the servo, the receiver, drive shaft and the differential is from Tamiya, the electric motor (8000 rpm), and of course screws (M2, M3) and the ball joints (M3).

Gearbox ratio is: 1:4
Tyre diameter is: 65 mm

Ford Mustang '67 Right before the sand paper

It was printed with ZORTRAX M 200
antibala is offline  
Old 08-05-2020, 02:14 AM
  #3  
Tech Initiate
Thread Starter
 
Join Date: Aug 2019
Location: Budapest
Posts: 34
Default

hey guys
here's a short video where we are right now in the building process

antibala is offline  
Old 09-07-2020, 04:22 AM
  #4  
Tech Initiate
Thread Starter
 
Join Date: Aug 2019
Location: Budapest
Posts: 34
Default

Hey guys ,
here are some pics. We finally finished it!!

right before paint job

painting the mustang

I think this color is amazing
garnt likes this.
antibala is offline  
Old 09-07-2020, 04:24 AM
  #5  
Tech Initiate
Thread Starter
 
Join Date: Aug 2019
Location: Budapest
Posts: 34
Default

Covid thinks it stays long, so we came up with a whole channel
antibala is offline  
Old 10-04-2020, 02:27 PM
  #6  
Tech Rookie
 
Join Date: Oct 2020
Posts: 6
Default

guys from hobbytalk forum do almost the same
I always admire their work
JasonMcMilan is offline  
Old 01-12-2021, 05:47 AM
  #7  
Tech Rookie
 
Join Date: Nov 2020
Location: Schweiz
Posts: 1
Default 111

11
KeithMuh is offline  
Old 03-14-2021, 03:13 AM
  #8  
Tech Rookie
 
mikewalker's Avatar
 
Join Date: Mar 2021
Location: Berlin
Posts: 11
Default

wow, it turned out not bad


mikewalker is offline  
Old 04-11-2021, 11:54 AM
  #9  
Tech Rookie
 
Join Date: Apr 2021
Posts: 18
Default

It turned out not bad. What is the wall thickness?
ITman3D is offline  
Old 04-12-2021, 03:13 AM
  #10  
Tech Initiate
Thread Starter
 
Join Date: Aug 2019
Location: Budapest
Posts: 34
Default

Originally Posted by ITman3D
It turned out not bad. What is the wall thickness?
It's 2 mm
antibala is offline  
Old 03-05-2022, 09:09 PM
  #11  
Tech Rookie
 
Join Date: Mar 2022
Posts: 15
Default

One of my favorite cars, looking good! I'll have to use some of this as a reference for myself.
Kentinator is offline  
Old 07-18-2022, 08:31 PM
  #12  
Tech Adept
iTrader: (13)
 
Join Date: Apr 2022
Location: Midwest
Posts: 106
Trader Rating: 13 (100%+)
Default

Looks great man. Is the STL posted somewhere?
RacingRookie27 is offline  
Old 12-07-2022, 10:37 AM
  #13  
Tech Rookie
 
Join Date: Apr 2009
Posts: 11
Default

I like how the frame is made of metal, ive seen a few designs where the chassis and parts were 3D printed and i always wondered why they dont use stiffer parts that would hold up better inside the parts. If i designed one ide try and design things like the chassis around either steel pins or carbon fiber rods. I get it the idea is to keep cost down but some parts need to be more rigid then other parts. I would try and print the chassis or something around steel or graphite rods as its printing or maybe slide the steel parts in after its printed. IN the first image the square tubing is the chassis but it could be printed around those tubes or slid in after the chassis is done
BowerR64 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 1 votes, 3.00 average.

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.