Wausau's newest 1/10th scale outdoor off-road track!
#16
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Greg had it figured out all bombers run the same motor a HPI bliz can motor. So everyone runs the same, for close racing action. And use older buggy frames. I have old rc10 ones. What does everyone think? Just wanting to know? Or is there some thing different with the class?
Not sure,
#17
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Justin you got plans for sunday or are you coming out to play?
#18
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Rain or shine we'll be at the track tomorrow by 3pm.
Rain~ the entire track is designed to drain so we have no spots that hold water.
Shine~ we'll have over 700 gallons of water on hand and the track takes us 10 min. to water.
Rain~ the entire track is designed to drain so we have no spots that hold water.
Shine~ we'll have over 700 gallons of water on hand and the track takes us 10 min. to water.
#19
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Mother nature finally threw us out at 6pm today but we got some running in before that. Glad to see Ken make the trip out, I know he runs with the guys down in Plover and I'm sure he'll give them a first hand account of what our track is like.
I'll post more info on our first actual race date when I have it, as of now we would be planning for the 18th of July.
I'll post more info on our first actual race date when I have it, as of now we would be planning for the 18th of July.
#20
Oval
Is the oval done yet?
#21
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
#22
Oval
I should make it up there 18, for the ovals. The bid block mod body rc10 is done. Any word on the bomber class or other oval classes? Thanks for the up dates!
#23
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Best I can tell for oval stuff right now would be a McAllister Latemodel body on a 2wd chassis simply because they make a body wide enough to fit a newer buggy which needs a 10 inch wide body. I know we can get a group of us to put them together. Bring all your stuff, I know you've got some stadium trucks too, and come up and see the tracks. We have a good time and everybody really seems to leave happy.
#24
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Weather should be nice on sunday!! Come get some practice in before we run our first official race day on the 25th!!!
If I get 10 guys to PM me AND show up! I'll grill dogs and burgers on the 25th MY TREAT!!!!!!!
Entry fee's for the 25th will be under $10 no matter how many classes you run!!!! You could race 4 classes for less than ten bucks! We're not here to make money we just wanna RACE!
If I get 10 guys to PM me AND show up! I'll grill dogs and burgers on the 25th MY TREAT!!!!!!!
Entry fee's for the 25th will be under $10 no matter how many classes you run!!!! You could race 4 classes for less than ten bucks! We're not here to make money we just wanna RACE!
#25
Tech Elite
iTrader: (7)
Wausaaaaaaup, sorry my friend and I use to say something to that effect every time we were there for the Snowmobile swap and grass drags or sledding.
If I was closer I would be happy to show up. I recently started my own track and the turnouts were small to none at first, but more people are getting to know about it.
What is the surface and what do you have for a scoring system, and is there a drivers stand or watering system and crapper?
Maybe post some pics or a you tube video of you and others racing or practicing .
I also found a free website listed below that you can make your own site with fairly easily, not the greatest but you cant beat the price (free ninety nine).
If I was closer I would be happy to show up. I recently started my own track and the turnouts were small to none at first, but more people are getting to know about it.
What is the surface and what do you have for a scoring system, and is there a drivers stand or watering system and crapper?
Maybe post some pics or a you tube video of you and others racing or practicing .
I also found a free website listed below that you can make your own site with fairly easily, not the greatest but you cant beat the price (free ninety nine).
#26
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Wausaaaaaaup, sorry my friend and I use to say something to that effect every time we were there for the Snowmobile swap and grass drags or sledding.
If I was closer I would be happy to show up. I recently started my own track and the turnouts were small to none at first, but more people are getting to know about it.
What is the surface and what do you have for a scoring system, and is there a drivers stand or watering system and crapper?
Maybe post some pics or a you tube video of you and others racing or practicing .
I also found a free website listed below that you can make your own site with fairly easily, not the greatest but you cant beat the price (free ninety nine).
If I was closer I would be happy to show up. I recently started my own track and the turnouts were small to none at first, but more people are getting to know about it.
What is the surface and what do you have for a scoring system, and is there a drivers stand or watering system and crapper?
Maybe post some pics or a you tube video of you and others racing or practicing .
I also found a free website listed below that you can make your own site with fairly easily, not the greatest but you cant beat the price (free ninety nine).
Appreciate the input though.
#27
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
It's sunday fun day
#28
Mind if I invite myself out for next Sunday?
Dan Jan
Dan Jan
#29
Super Moderator
Thread Starter
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
All are welcome, we cater to everybody not just the fast guys like you Dan Watson stopped by today and seemed to like the track. It didn't look pretty when he was there because it wasn't run on or watered yet. Bring Chad with you, he said he could make it up after this weekend. Noramlly we leave it hard pack and let the tires work up a little loose stuff on top but we're gonna try racking it for a more loomy surface so bring tires for that too. Would love to see ya make it up!