PT Raceway NEW TRACK Level Green, Murrsyville, Pittsburgh, Penn Trafford, Irwin
#331
As far as a new oval layout, we thought it would be cool to have a few different set ups like they do in NASCAR, but it seems everyone is having a great time the way it is. It is actually fun. Those mini sprints are awesome, and we have some nascars that are flying. Mike's is HOOKED up out there.
#332
As far as a new oval layout, we thought it would be cool to have a few different set ups like they do in NASCAR, but it seems everyone is having a great time the way it is. It is actually fun. Those mini sprints are awesome, and we have some nascars that are flying. Mike's is HOOKED up out there.
#334
after some practice laps last night on the new layout you either will like it or hate it but anybody with a good setup will do ok if they can drive a track and just not throw a big motor in and try to drive it
#335
Tech Initiate
Passport Charger
Derek,
The charger I bought from you does not work at all. I plugged it in once and when I went to change the AMPS it just shut off, fan and all. Was this a new charger? Do you have the receipt because if it was new this should not have happened? Never even got to charge a battery with it yet.
ideas?
Thanks,
Gary
The charger I bought from you does not work at all. I plugged it in once and when I went to change the AMPS it just shut off, fan and all. Was this a new charger? Do you have the receipt because if it was new this should not have happened? Never even got to charge a battery with it yet.
ideas?
Thanks,
Gary
#336
Looks like it is going to be a good night of racing with some old friends showing up for the first time also to my buddy dan I would like to know if that tool you bought came with batteriesjust kidding I like it
#337
Tech Adept
I'll give you back the money.never had a problem with it and I have used it before.it was not a new charger.
#338
Tech Adept
Also if your there sunday I will take a look at it and try to find out the problem and solve it.if all else fails I will refund you the 20 dollars for it.
#341
i just want to thank Big Andy again for letting me throw my truck in for the race day instead of sitting there all day in the corner the best part of the day was beating up on some oval guys showing them that us on road guys are not that slow taking the A-Main win by 3 laps over second place
#342
Tech Initiate
Associated T4.1 Aluminum Steering Parts
I'm trying to find T4.1 aluminum steering rack that replaces the original steering rack part 9659. I was told to go to STRC.com. I found a teamSTRC.com. I couldn't find that exact part. I see a Bulkhead and Steering Knuckle, but that is about it. I see quite a few for HPI. If you find one, could you post the part number?
Thanks I appreciate it.
Gary
Thanks I appreciate it.
Gary
#343
Tech Addict
iTrader: (17)
STRC doesn't make b4/t4/sc10 bellcranks, but here are some good options:
http://cgi.ebay.com/Associated-B4-T4...-/300414858351
http://www.gpmracing.com/index.cgi?p...r=AT4048;c=144
Keep in mind that eliminating the servo saver will put a lot more strain on your servo any time you clip a pipe and a gear set for a good servo costs a lot more than plastic steering parts.
http://cgi.ebay.com/Associated-B4-T4...-/300414858351
http://www.gpmracing.com/index.cgi?p...r=AT4048;c=144
Keep in mind that eliminating the servo saver will put a lot more strain on your servo any time you clip a pipe and a gear set for a good servo costs a lot more than plastic steering parts.
#344
i just want to thank Big Andy again for letting me throw my truck in for the race day instead of sitting there all day in the corner the best part of the day was beating up on some oval guys showing them that us on road guys are not that slow taking the A-Main win by 3 laps over second place
big andy also wanted to thank all of those who helped out with the track change not just this friday and sunday but those of you who help each time. You guys know who you are and we are very thankful.
#345
I've seen two different aluminum bellcranks, Integy makes on that keeps the servo saver(part number T7848SILVER). GPM makes another that seems to eliminate the servo saver, I'm not sure of the part number.
I've bought heavy duty servo saver springs, tightened the hell out of them and still had mushy steering. It wasnt bad till I picked up high speed servos and the steering became really inconsistent....didnt bother picking up the aluminum rack, just glued the stock servo savers.
I've bought heavy duty servo saver springs, tightened the hell out of them and still had mushy steering. It wasnt bad till I picked up high speed servos and the steering became really inconsistent....didnt bother picking up the aluminum rack, just glued the stock servo savers.