Cool Can Fan Talk
#316
Originally Posted by Dadaman
Malc.
You have an email from me about a ccf for the T2, sending to Australia.
You have an email from me about a ccf for the T2, sending to Australia.
Cheers Malc TCCFM
#317
We at Hetford had a meeting last night to discuss what motors etc, to put foward for our Rug Racers series and it was agreed that we will also run to the same motor rules as Carpet Wars, the only difference being that if anyone wants to use the Novak SS4300 motor which is supposed to be the same as a 19 turn brushed will be put in with the modifeid section
Rules
Modified: - No motor limit. all brushless included
Stock: - 27T Rebuild-able Stock Motors (as per BRCA list) with the addtion of two motors approved but the Carpet Wars championship
Super stock:- 19T Rebuild-able Stock Motors (as per BRCA list)
A list will be provied at the start of each meeting
Additions
CO27
Epic 27 in green on the armature tag.
Blue.
Can has two flats with 3 slots per flat.
Two Magnets.
No ball racers
X Stock
Epic 27 in red on the armature tag.
Dark brown/black.
Can has two flats with 3 slots per flat.
Two Magnets.
No ball racers
Cheers Malc TCCFM
We will also be running 6, rounds to give the racer just that little more fun We will run 4 rounds and 2 finals points from both
Rules
Modified: - No motor limit. all brushless included
Stock: - 27T Rebuild-able Stock Motors (as per BRCA list) with the addtion of two motors approved but the Carpet Wars championship
Super stock:- 19T Rebuild-able Stock Motors (as per BRCA list)
A list will be provied at the start of each meeting
Additions
CO27
Epic 27 in green on the armature tag.
Blue.
Can has two flats with 3 slots per flat.
Two Magnets.
No ball racers
X Stock
Epic 27 in red on the armature tag.
Dark brown/black.
Can has two flats with 3 slots per flat.
Two Magnets.
No ball racers
Cheers Malc TCCFM
We will also be running 6, rounds to give the racer just that little more fun We will run 4 rounds and 2 finals points from both
#319
Originally Posted by 1fastdude
Where can I get a replacement fan in the U.S.A. I know EA had some awesome fans but is not going to get anymore. I know that Novak has some also, but I am looking more toward the one's that EA had. Thanks
Long time no hear dude, not to sure about the fans that EA had can you get me some info so that I can help you out. I can you some of our high quality fans they are 25X25X6mm fans they are 5volts but most of us run them straight from the battery side of the ESC which wil pump 7.2 volts through them. The speed is 11,000 rpm at 5 volts and push 2.2cfm plenty of airfolw to keep your motors from going soft. They are NOT the ball bearing internal makeup variety like most of the heat sink variety use, as they WILL slow down, or even stall over the kan depending on the strength of the magnets within the motor.
Cheers Malc TCCFM
#321
Originally Posted by wildman
Will the T2 version work for the T2- 007?
Thanks
Brian
Thanks
Brian
Not to sure yet, once I get my hands on one I will let you have the details
Cheers Malc TCCFM
#323
Originally Posted by pinggoy
which is a better way to put the fan. pulling air from the can or blowing air to the endbell..?
thanx
thanx
Personally I have both fans blowing onto both kan and brush/armature and find that it works fine, but there are always people that are excetions to the rule
Cheers Malc TCCFM
#325
Originally Posted by Burlap
Is there any ETA on when the Tamiya link will be working again?
I will get onto the webmaster about this prob straight away, thanks for letting me know.
Cheers Malc TCCFM
#327
Originally Posted by wide_mouth_frog
your site, hertford site, Rug Racers site!!! Your working Steve too hard Malc
Cheers Malc TCCFM
#328
Originally Posted by Burlap
Is there any ETA on when the Tamiya link will be working again?
The Taniya tlink is now working
Cheers Malc TCCFM
#329
.
#330
hey malc,
u got email!
u got email!