vassago

0.270 is a good reference point.

You probably won't damage our bit, the comm wil come undone when running it usually. Especially with low-turn motors.

Kropy

iTrader: (12)

Bobby - Good luck with your new ride, I'm sure it will be a fast one.

sesimon

Thanks for the response, thats a lot of help. I've never really been sure how small you could go on those.

BobbyDoyle

Thanks Kropy! BTW, check out my car in RC Car Action...it's the yellow/orange/silver truck on the top.

Hey Curtis I'll call you tomorrow or Monday...TTY then.

steve eaves

iTrader: (74)

Thanks for the HP curtis car was a rocket call ya soon.

nino_pohan

Curtis, are you recommend if i use spintec for all type Ib battery? thanks

vassago

Hello Curtis, are you still here buddy?
Tried e-mailing you but no response

BobbyDoyle

I don't see why it would hurt, I've seen people use them on IB packs before. The Spintec is overrated though IMO.

mini-dub

iTrader: (16)

If anyone wants to buy a Spintec I have one for sale for $70 that's in perfect condition in the origional package. It's only been used a month and works perfect. They're great for reviving old packs , I just don't use old packs. PM me if interested.

barnacle

iTrader: (9)

THATS RIGHT, FULL FACTORY BITCHES!!!

Curtis Schlaht

Actually, I never recived an email from you. Maybe it went to my spam folder for some reason... Try emailing us at [email protected] instead....


Curt,

Curtis Schlaht

Maybe try posting this in the swap and sell forum


Curt,

steve eaves

iTrader: (74)

Damn he lives Isent you one awhile back also

vassago

Resend the mail, if it doesn't get thru I'll try sending it from an other account. Some spam filters filter Gmail mails for whatever reason.



Friend of mine tried some of your IB4200 matched packs he borrowed from a team driver and his car went over 72KM/h (46Mph) on the straight. With his matched 3700s he only got 69KM/h (44Mph)
All runs made with the same Orion Element 19T (handout motor) en the speeds were recorded with an AMB speed-trap.
He also happened to win the race

Said team driver (Rob Jansen) narrowly missed the podium and finished 4th.
Once again showing great potential

Curtis Schlaht

New Product Announcements;


Coming In Mid July,

Armatures/motors with comm syncs (comm. hats); Available mid July, every motor and replacement armature from 10 through 6 turns will come standard with DC’s comm. Sync.

LiPo packs; We are set to release our own line of high drain Lipo packs. Every pack will come standard with Charge Protection built into the battery

Lipo Receiver packs; With Charge Protect Plug

DC-920200 200 Mah (5C) 7.4v LiPo Pack, Dim. 25x19x15 (mm), 10g, Futaba Plug (SMALL)
DC-920250 250 Mah (10C) Lipo 7.4v Pack, Dim. 34x25x19 (mm), 15g Futaba Plug (SMALL)
DC-920850 850 Mah (10C) Lipo 7.4v Pack, Dim. 54x30x15 (mm), 47g Futaba Plug
DC-921200 1200 Mah (7C) Lipo 7.4v Pack, Dim. 45x29x28mm (mm), 60g Futaba Plug
DC-921600 1600 Mah (10C) Lipo 7.4v Pack, Dim. 83.5x30x16 (mm), 80g Futaba Plug


LiPo Voltage Regulators; To protect against the high voltage supplied by our Lipo receiver packs we will also carry our very own Voltage Regulators.

DC-920001 6v 1-Amp Voltage Regulator For Lipo Reveiver Pack (SMALL)
DC-920025 6v 2-Amp Voltage Regulator For Lipo Reveiver Pack


LiPoTransmitter Packs; For KO and Futaba Radios

DC-940200 KO Transmitter Pack, 2500 MAH, 100x30x28mm, 140g, 11.1v 3-Cell
DC-940300 Futaba Transmitter Pack 2100 MAH, 100x55x14mm, 142g, 11.1v 3-Cell


LiPo Packs for Airplanes & Helicopters; High discharge rate!! All packs come with balance charge plug.

DC-932085 7.4V 900 Mah (10C) 2-Cell LiPo w/ Balance Chr Plug, 56x30x15mm, JST Plug, 45g
DC-933085 11.1V 900Mah (10C) 3-Cell LiPo w/ Balance Chr Plug, 56x30x22mm, JST Plug, 65g
DC-932110 7.4V 1100 Mah (20C) LiPo w/ Balance Chr Plug, 68x35x15mm, Deans Plug, 65g
DC-933110 11.1V 1100 Mah (20C) LiPo w/ Balance Chr Plug, 68x35x22mm, Deans Plug, 93g
DC-932170 7.4V 1700 Mah (20C) LiPo w/ Balance Chr Plug, 88x34x16mm, Deans Plug, 90g
DC-933170 11.1V 1700 Mah (20C) LiPo w/ Balance Chr Plug, 88x34x23mm, Deans Plug, 132g
DC-932210 7.4V 2100 Mah (20C) LiPo w/ Balance Chr Plug, 104x34x18mm, Deans Plug, 130g
DC-933210 11.1V 2100 Mah (20C) LiPo w/ Balance Chr Plug, 104x34x26mm, Deans Plug, 190g
DC-933320 11.1V 3200 Mah (20C) LiPo w/ Balance Chr Plug, 133x44x25mm, Deans Plug, 210g


Mini Stuff; For 1/18th Scale

Brusless Mini Motors - With Motor Heat Sink


DC-030080 8.0 Kv Mini Brushless Motor With Heat Sink
DC-030069 6.9 Kv Mini Brushless Motor With Heat Sink
DC-030058 5.8 Kv Mini Brushless Motor With Heat Sink
DC-030047 4.7 Kv Mini Brushless Motor With Heat Sink


Mini Brushless ESC’s; 20amp & 40amp models. Fully Programmable Via D-Link Interface And PC Software

DC-202500 Brushless ESC, 20amp, Prorgammable, Economy
DC-204000 Brushless ESC, 40amp, Programmable, PRO


BL ESC Accessories

DC-200001 D-Link Interface, Connects Cable To ESC
DC-200002 D-Link Cable (USB to Mini USB)
DC-200003 D-Link Interface Combo, Interface & Cable


Brushless Combos; Includes ESC, Motor, D-Link Cable, D-Link Interface (Software Download @ Website)

DC-202580 Brushless Combo, 40 Amp Programmable ESC w/ 8.0Kv Motor
DC-202569 Brushless Combo, 40 Amp Programmable ESC w/ 6.9Kv Motor
DC-202558 Brushless Combo, 40 Amp Programmable ESC w/ 5.8Kv Motor
DC-202547 Brushless Combo, 20 Amp Programmable ESC w/ 4.7Kv Motor Economy

Mini Batteries

Mini NiMh Batteries Intellect Batteries, High Quality
DC-910146 1400 Mah IB Cells, 6 Cell Pack (4 by 2) Assembled, Unmatched 7.2v
DC-911146 1400 Mah IB Cells, 6 Cell Pack (4 by 2) Assembled,VX Matched 7.2v

Mini LiPo Packs; With Charge Protect Circuitry
DC-910160 1600 Mah, LiPo Pack, 7.4V 2-Cell, Chrg Protect, 83.5x30x16mm, 80g, A 51021 Plug


Further details and product descriptions will be posted on our website come early July.


Curt,