eXpress Motorsports
Tech Master
iTrader: (17)
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
Tech Master
iTrader: (17)
I had caught 4th and 5th then rolled it myself. Thats what really ended the race for me. It was pretty sketchy going through that pack of cars with a oneway.
Tech Champion
iTrader: (42)
Hey Karl.. When Ron hears "Less than 5"..He thinking it's all you can Eat..Not all he can beat, So you were just part of his afternoon snack.....
Tech Master
iTrader: (17)
Tag, you have PM
Tech Master
iTrader: (39)
I bought a used DUO express motor from a user here. Does anyone know how to change the timing? I'm assuming the holes that the long screws go in to? If so, which hole is 0 deg timing?
Thanks in advance.
Thanks in advance.
yes, the long screws
if you are looking at the end bell, counter clockwise to add timing. clockwise to reduce timing
if you are looking at the end bell, counter clockwise to add timing. clockwise to reduce timing
Tech Master
iTrader: (39)
The screws will be in the left most holes. The endbell will line up with the tabs you solder your speedo to.
Tech Master
iTrader: (39)
Ran the 13.5 this weekend at Timezone Grand Prix. I ended up qualifing 5th and after out triple Amains I finished in the 3rd spot with a 3rd, 3rd and 2nd Finish. Motor had awesome power, mostly driver error that held me back. Thanks again Tag for the power.
Tim
Tim
Tech Master
iTrader: (4)
Mike
Hi Tag, you have PM