EAMotorsports discussion thread
#4276
Team EAM
iTrader: (79)
Originally Posted by Tubaboy
When cutting the comm, is it best to move the bit quickly across it, or more slowly?
Paul
Paul
EA
#4277
Tech Adept
Any news on the IB3800 need a few packs.
#4278
Team EAM
iTrader: (79)
Still waiting on them to come in from SMC.....I think IB ran into a delay because they have been selling so many 4200's and it's taken them a little longer to get this batch of 3800's out. I hope to have some before the end of the week.
I do have a great deal on some lower end packs or as I call them "practice packs" if you want a killer deal....Most guys buy these and tell me they are their best packs and race them. They are listed in the commercial swap and sell page.
EA
I do have a great deal on some lower end packs or as I call them "practice packs" if you want a killer deal....Most guys buy these and tell me they are their best packs and race them. They are listed in the commercial swap and sell page.
EA
#4279
you racing this weekend??Didn't see you on the signup page.
#4280
Out door racing has begun. Finger-lakes raceway in Canandaigua NY. It's a 210ft dirt oval. I was able to TQ and finish 1st using an EA C27.
Bob Mott
Bob Mott
Last edited by 1M; 04-05-2012 at 03:56 PM.
#4282
Team EAM
iTrader: (79)
I am not sure of the final results yet but I want to congradulate the following guys on their A Main perfomances at the Roar Nationals. I was not there to tune motors for these guys and they done a fantastic job!! I actually think they do better when I am not there!!!
Stock TC.
Drew Ellis
Michael Bruce
TJ Bradley
Stock 12th
Shad Galante
19 Turn 12th scale
Michael Bruce
Shad Galante
Congrats to the guys in the B main of TC stock as well as the field was very tight as usual!!
Shad Galante
Clinton Riley (Welcome to the EAM Team as well!!)
Edgar Fiollas.
With these guys on boad its going to be a good year!! See everyone in Vegas!!!
EA
Stock TC.
Drew Ellis
Michael Bruce
TJ Bradley
Stock 12th
Shad Galante
19 Turn 12th scale
Michael Bruce
Shad Galante
Congrats to the guys in the B main of TC stock as well as the field was very tight as usual!!
Shad Galante
Clinton Riley (Welcome to the EAM Team as well!!)
Edgar Fiollas.
With these guys on boad its going to be a good year!! See everyone in Vegas!!!
EA
#4285
Tech Champion
iTrader: (4)
Sounds good eric... I'm looking to grab some more batts soon. what you reckon for 19t... 38's or 42's??
Anyway, got the next 19t national this weekend, off to halifax.. BIG track. I've got my trusty C2's ready, and am going to try it against one of the Checkpoint Money motors. I think the C2 might be better suited simply because it's revvier, and 'fax is a 1:8th scale track.
What you reckon on motor setup for the C2... F-lines, Purple/purple?
Cheers
Ed
Anyway, got the next 19t national this weekend, off to halifax.. BIG track. I've got my trusty C2's ready, and am going to try it against one of the Checkpoint Money motors. I think the C2 might be better suited simply because it's revvier, and 'fax is a 1:8th scale track.
What you reckon on motor setup for the C2... F-lines, Purple/purple?
Cheers
Ed
#4286
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Hi Eric
this is a bit late info
But EAmotorsports is the TIR open 19t spec champs 2006
this was taken from microtech`s site
i have to look for these result`s that`s why it`s late
Snetterton was the venue for the first TIR British open event on the Bank holiday weekend of May 27th-29th, and what a meeting it turned out to be.
With the usual smooth operation from the Snetterton crew, the racers had a great time with the Microtech team putting in a good showing.
In 19t, Mark Stiles put in some great finals to take the title after two leg wins. Using his Hot Bodies Cyclone powered by an EA C2 motor (on a 5.01 overall gearing) Mark was very happy with the speed of his car. Also making the 19t A final in 7th on the grid was the EA powered Yokomo of Gary Dyson.
this is a bit late info
But EAmotorsports is the TIR open 19t spec champs 2006
this was taken from microtech`s site
i have to look for these result`s that`s why it`s late
Snetterton was the venue for the first TIR British open event on the Bank holiday weekend of May 27th-29th, and what a meeting it turned out to be.
With the usual smooth operation from the Snetterton crew, the racers had a great time with the Microtech team putting in a good showing.
In 19t, Mark Stiles put in some great finals to take the title after two leg wins. Using his Hot Bodies Cyclone powered by an EA C2 motor (on a 5.01 overall gearing) Mark was very happy with the speed of his car. Also making the 19t A final in 7th on the grid was the EA powered Yokomo of Gary Dyson.
#4287
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
stafford BTCC 11th june
The BTCC event at Stafford was held in scorching weather and was a great event for the Microtech Racing / EA Motorsports team.
Adrian Bidewell took TQ in the 27t stock class, going on to win the first leg of the A final and a third in the final leg after an early incident. This gave Adrian the overall win on his first visit to the Stafford track. Also in the A final were Microtech / EA Motorsports drivers Gary Dyson and young Tom Watts putting in a great showing to make the top ten.
Adrian used an EA Motorsports Monster fitted with F-line brushes to power his car.
Adyb is picking up the game now & it is a yoke BD he is using now ,i`m soon to follow
Adrian Bidewell took TQ in the 27t stock class, going on to win the first leg of the A final and a third in the final leg after an early incident. This gave Adrian the overall win on his first visit to the Stafford track. Also in the A final were Microtech / EA Motorsports drivers Gary Dyson and young Tom Watts putting in a great showing to make the top ten.
Adrian used an EA Motorsports Monster fitted with F-line brushes to power his car.
Adyb is picking up the game now & it is a yoke BD he is using now ,i`m soon to follow
#4289
Team EAM
iTrader: (79)
Hey Jolly,
Thanks for the update.....Im very happy to hear that everone is fast over there using EAM products!! Adrian has been on a Tear lately hasnt he? His name has been at the top for the last 3-4 months!!!
Hey Brian,
They should be coming in this week...I'll post here as soon as I get them ready. I'll also be doing 3800's so I can get a cell for this pack I have here....I didnt have any thing that matched up close enough for it.
EA
Thanks for the update.....Im very happy to hear that everone is fast over there using EAM products!! Adrian has been on a Tear lately hasnt he? His name has been at the top for the last 3-4 months!!!
Hey Brian,
They should be coming in this week...I'll post here as soon as I get them ready. I'll also be doing 3800's so I can get a cell for this pack I have here....I didnt have any thing that matched up close enough for it.
EA
#4290
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Originally Posted by EAMotorsports
Hey Jolly,
Thanks for the update.....Im very happy to hear that everone is fast over there using EAM products!! Adrian has been on a Tear lately hasnt he? His name has been at the top for the last 3-4 months!!!
EA
Thanks for the update.....Im very happy to hear that everone is fast over there using EAM products!! Adrian has been on a Tear lately hasnt he? His name has been at the top for the last 3-4 months!!!
EA