78LikesEAMotorsports discussion thread
06-21-2005, 11:12 PM
#2449
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
This could be why we are have a influx of glitching suddenly appearing
we have it on F-lines,4499`s & xxx brush
but when me & atlas shave the leading & trailing edges (less overlap) the glitching goes
we have told & done this to quite a few racers of late & it goes
untill that is the brush wears a little or you retrue the comm then the overlap is back again
so with the small comm all ready from new & the brush`s staying the same size from new the overlap is there from the start
we have it on F-lines,4499`s & xxx brush
but when me & atlas shave the leading & trailing edges (less overlap) the glitching goes
we have told & done this to quite a few racers of late & it goes
untill that is the brush wears a little or you retrue the comm then the overlap is back again
so with the small comm all ready from new & the brush`s staying the same size from new the overlap is there from the start
06-22-2005, 04:57 AM
#2450
Hey Jolly,
It is possible but not usually. One thing that may help is to take the endbell and solder the little tabs off of the brush hoods to the circuit board on the end. There are two copper tabs on each hood. Sometimes those dont make good contact and you have no capictors
This last batch I sent I narrowed the brush just a bit to take away soem overlap...So maybe that will help too. They were some stout motors
EA
It is possible but not usually. One thing that may help is to take the endbell and solder the little tabs off of the brush hoods to the circuit board on the end. There are two copper tabs on each hood. Sometimes those dont make good contact and you have no capictors
This last batch I sent I narrowed the brush just a bit to take away soem overlap...So maybe that will help too. They were some stout motors
EA
06-22-2005, 05:54 AM
#2451
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Afew guy`s do that endbell thing already but there was a sudden influz og glitching around the racing fertinity
just seems to coincedental smallcomms,brush overlap, narrow the brush`s it goes away, but can come back if you retrue the comm to a smaller diameter
just seems to coincedental smallcomms,brush overlap, narrow the brush`s it goes away, but can come back if you retrue the comm to a smaller diameter
06-22-2005, 01:06 PM
#2452
Tech Adept
I just got three Monsters today from that last batch I'll assume and they definately have some killer #'s. They look to be 5-10 better than anything I currently own!
Not to mention the GREAT customer service and FAST shipping. I sent 2-3 emails asking quesitons which all got responded to within hours. Then I placed the order on Sunday and received them today,
yes 3 days! I was hoping to have them for next weekend at best!
THANKS AGAIN!!!
Not to mention the GREAT customer service and FAST shipping. I sent 2-3 emails asking quesitons which all got responded to within hours. Then I placed the order on Sunday and received them today,
yes 3 days! I was hoping to have them for next weekend at best!THANKS AGAIN!!!
06-23-2005, 05:54 AM
#2455
if it has a silver shunt then its most likely a 767
if its a goldish shunt and has an F stamped on the back of the brush theen it doesn't take a rocket scientist to figure out what brush it is
if its a goldish shunt and has an F stamped on the back of the brush theen it doesn't take a rocket scientist to figure out what brush it is
06-23-2005, 06:11 AM
#2457
Originally Posted by raving-monkey
if it has a silver shunt then its most likely a 767
if its a goldish shunt and has an F stamped on the back of the brush theen it doesn't take a rocket scientist to figure out what brush it is
if its a goldish shunt and has an F stamped on the back of the brush theen it doesn't take a rocket scientist to figure out what brush it is
06-23-2005, 06:12 AM
#2458
i wasn't trying to be a smart arse.....a gold shunt and F stamped the back os an f-line.
now come on..how hard is that to work out
06-23-2005, 06:33 AM
#2459
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
EA
will now supply F-lines on he`s motor unless told other wise
just had some in monsters,roars,c2`s all with F-lines
will now supply F-lines on he`s motor unless told other wise
just had some in monsters,roars,c2`s all with F-lines
06-23-2005, 11:23 AM
#2460
Originally Posted by Fuzzy
I was asking so I know what I'll be getting when I place my order smartass.
(sorry.. filipinos are known for corny jokes) EA.. hit me up on AIM when you have a chance. id like to check in with ya.. make sure everything is cool.